Digital transmission systems operating over high frequency radio channels

Imperial Users onl

Statističke karakteristike prvog i drugog reda signala u bežičnom telekomunikacionom sistemu sa selekcionim kombinovanjem

In doctoral dissertation, first and second order system performances of wireless communication system in the presence of fading and interference are considered. Theoretically, four cases are taken into consideration, and obtained numerical results are graphically presented and analyzed. Firstly, wireless mobile communication system with the receiver that contains automatic frequency control (AFC) loop operating over fading channel in the presence of single interference is considered. Performance measures, such as average switching rate (ASR) and mean time lose of lock (MTTL), are defined. In this doctoral dissertation, ASR and MTTL, for three different fading channels: Kg, α-μ and k-μ are obtained. In the next chapter, wireless relay communication system with two sections in the presence of multipath fading is considered. Signal envelope at the input of the receiver can be expressed as product of the first section signal envelope and the second section signal envelope. For such system model, average level crossing rate (LCR) for the case when radio relay system of the first section operates over Nakagami-m fading environment and second section operates over k-μ fading environment is obtained. Wireless relay system with two sections in the presence of non-linear α-μ fading channel is than taken into consideration. Moreover, radio relay system with two sections in the presence of multipath fading and interference is also considered. LCR of the ratio of the product of two k-μ random processes and k-μ random process is calculated. Finally, LCR of the ratio of Rician random process and product of two Rician random processes is obtained. Wireless communication system with two inputs SSC diversity receiver operating over correlated multipath η-μ fading in the presence of interference is than considered. Joint probability density function and joint distribution cumulative function of the ratios of signal to interference at inputs of SSC receivers are calculated. By using obtained expressions for probability density function (PDF), average bit error probability (ABER) for different coherent and non-coherent modulation schemes is obtained while by using derived cumulative distribution function (CDF), outage probability (OP) is obtained. At the end of doctoral dissertation, macrodiversity system with macrodiversity SSC receiver and two microdiversity SC receivers operating over Gamma shadowed multipath fading channel is proposed. In one case Nakagami-m multipath fading channel is considered while in the second case k-μ multipath fading is considered. System performances of the proposed system are derived and numerical results are graphically presented and discusse

CELLULAR-ENABLED MACHINE TYPE COMMUNICATIONS: RECENT TECHNOLOGIES AND COGNITIVE RADIO APPROACHES

The scarcity of bandwidth has always been the main obstacle for providing reliable high data-rate wireless links, which are in great demand to accommodate nowadays and immediate future wireless applications. In addition, recent reports have showed inefficient usage and under-utilization of the available bandwidth. Cognitive radio (CR) has recently emerged as a promising solution to enhance the spectrum utilization, where it offers the ability for unlicensed users to access the licensed spectrum opportunistically. By allowing opportunistic spectrum access which is the main concept for the interweave network model, the overall spectrum utilization can be improved. This requires cognitive radio networks (CRNs) to consider the spectrum sensing and monitoring as an essential enabling process for the interweave network model. Machine-to-machine (M2M) communication, which is the basic enabler for the Internet-of-Things (IoT), has emerged to be a key element in future networks. Machines are expected to communicate with each other exchanging information and data without human intervention. The ultimate objective of M2M communications is to construct comprehensive connections among all machines distributed over an extensive coverage area. Due to the radical change in the number of users, the network has to carefully utilize the available resources in order to maintain reasonable quality-of-service (QoS). Generally, one of the most important resources in wireless communications is the frequency spectrum. To utilize the frequency spectrum in IoT environment, it can be argued that cognitive radio concept is a possible solution from the cost and performance perspectives. Thus, supporting numerous number of machines is possible by employing dual-mode base stations which can apply cognitive radio concept in addition to the legacy licensed frequency assignment. In this thesis, a detailed review of the state of the art related to the application of spectrum sensing in CR communications is considered. We present the latest advances related to the implementation of the legacy spectrum sensing approaches. We also address the implementation challenges for cognitive radios in the direction of spectrum sensing and monitoring. We propose a novel algorithm to solve the reduced throughput issue due to the scheduled spectrum sensing and monitoring. Further, two new architectures are considered to significantly reduce the power consumption required by the CR to enable wideband sensing. Both systems rely on the 1-bit quantization at the receiver side. The system performance is analytically investigated and simulated. Also, complexity and power consumption are investigated and studied. Furthermore, we address the challenges that are expected from the next generation M2M network as an integral part of the future IoT. This mainly includes the design of low-power low-cost machine with reduced bandwidth. The trade-off between cost, feasibility, and performance are also discussed. Because of the relaxation of the frequency and spatial diversities, in addition, to enabling the extended coverage mode, initial synchronization and cell search have new challenges for cellular-enabled M2M systems. We study conventional solutions with their pros and cons including timing acquisition, cell detection, and frequency offset estimation algorithms. We provide a technique to enhance the performance in the presence of the harsh detection environment for LTE-based machines. Furthermore, we present a frequency tracking algorithm for cellular M2M systems that utilizes the new repetitive feature of the broadcast channel symbols in next generation Long Term Evolution (LTE) systems. In the direction of narrowband IoT support, we propose a cell search and initial synchronization algorithm that utilizes the new set of narrowband synchronization signals. The proposed algorithms have been simulated at very low signal to noise ratios and in different fading environments

Performance analysis of assisted-GNSS receivers

The goal of this thesis is to improve the understanding of the performance of Global Navigation Satellite System (GNSS) receivers that use assistance data provided by cellular networks. A typical example of such a receiver is a mobile phone including a Global Positioning System (GPS) receiver. Using assistance data such as an accurate estimate of the GPS system time is known to improve the availability and the time-tofirst- fix performance of a GNSS receiver. However, the performance depends on the architecture of the cellular network and may vary significantly across networks. This thesis presents three new contributions to the performance analysis of assisted-GNSS receivers in cellular networks. I first introduce a mathematical framework that can be used to calculate a theoretical lower bound of the time-to-first-fix (TTFF) in an assisted-GNSS receiver. Existing methods, for example the flow-graph method, generally focus on calculating the theoretical mean acquisition time of a pseudo-noise signal for one satellite only. I extend these methods to calculate the full probability distribution of the joint acquisition of several satellites, as well as the sequential acquisition of satellites, which is commonly performed in assisted receivers. The method is applied to real measurements made in a multipath fading channel. I next consider time assistance in unsynchronised cellular networks. It is often argued that unsynchronised networks can not provide fine-time aiding since they do not have a common clock, although few experimental results have been reported in the existing literature. I carried out experiments on a GSM network, a second-generation cellular network, in Cambridge, UK, in order to measure the time stability of the synchronisation signals. The results showed a large variability in the time stabilities across different base stations and I evaluated the performance of an ensemble filter that combines the measurements into a single, more accurate, estimate of the universal time. The main contribution is to show that the performance of such a filter is adequate to provide fine-time assistance to a satellite navigation receiver. Finally, I address the positioning performance of an assisted receiver in synchronised cellular networks. Cellular positioning has been often investigated in the literature, but few results on real networks have been presented. Many positioning methods are proprietary and little information about their performance in real networks haven been published publicly. A CDMA2000 cellular network in Calgary, Canada, was used to collect experimental data. The time stability and the synchronisation of the CDMA2000 pilot signals were excellent and were used to evaluate the performance of CDMA2000-based cellular positioning system. I then developed a method to combine the pseudo-range measurements from the GPS signals and the CDMA2000 base stations. I evaluated the performance of positioning in both outdoor and indoor environments, and I analysed the effects and the possible mitigation of non-line-of-sight signals. The main contribution is to show that additional satellite navigation signals can improve the accuracy of cellular positioning beyond what is theoretically expected from the improvement in the geometry.Cambridge Silicon Radi

Adaptive Baseband Pro cessing and Configurable Hardware for Wireless Communication

The world of information is literally at one’s fingertips, allowing access to previously unimaginable amounts of data, thanks to advances in wireless communication. The growing demand for high speed data has necessitated theuse of wider bandwidths, and wireless technologies such as Multiple-InputMultiple-Output (MIMO) have been adopted to increase spectral efficiency.These advanced communication technologies require sophisticated signal processing, often leading to higher power consumption and reduced battery life.Therefore, increasing energy efficiency of baseband hardware for MIMO signal processing has become extremely vital. High Quality of Service (QoS)requirements invariably lead to a larger number of computations and a higherpower dissipation. However, recognizing the dynamic nature of the wirelesscommunication medium in which only some channel scenarios require complexsignal processing, and that not all situations call for high data rates, allowsthe use of an adaptive channel aware signal processing strategy to provide adesired QoS. Information such as interference conditions, coherence bandwidthand Signal to Noise Ratio (SNR) can be used to reduce algorithmic computations in favorable channels. Hardware circuits which run these algorithmsneed flexibility and easy reconfigurability to switch between multiple designsfor different parameters. These parameters can be used to tune the operations of different components in a receiver based on feedback from the digitalbaseband. This dissertation focuses on the optimization of digital basebandcircuitry of receivers which use feedback to trade power and performance. Aco-optimization approach, where designs are optimized starting from the algorithmic stage through the hardware architectural stage to the final circuitimplementation is adopted to realize energy efficient digital baseband hardwarefor mobile 4G devices. These concepts are also extended to the next generation5G systems where the energy efficiency of the base station is improved.This work includes six papers that examine digital circuits in MIMO wireless receivers. Several key blocks in these receiver include analog circuits thathave residual non-linearities, leading to signal intermodulation and distortion.Paper-I introduces a digital technique to detect such non-linearities and calibrate analog circuits to improve signal quality. The concept of a digital nonlinearity tuning system developed in Paper-I is implemented and demonstratedin hardware. The performance of this implementation is tested with an analogchannel select filter, and results are presented in Paper-II. MIMO systems suchas the ones used in 4G, may employ QR Decomposition (QRD) processors tosimplify the implementation of tree search based signal detectors. However,the small form factor of the mobile device increases spatial correlation, whichis detrimental to signal multiplexing. Consequently, a QRD processor capableof handling high spatial correlation is presented in Paper-III. The algorithm and hardware implementation are optimized for carrier aggregation, which increases requirements on signal processing throughput, leading to higher powerdissipation. Paper-IV presents a method to perform channel-aware processingwith a simple interpolation strategy to adaptively reduce QRD computationcount. Channel properties such as coherence bandwidth and SNR are used toreduce multiplications by 40% to 80%. These concepts are extended to usetime domain correlation properties, and a full QRD processor for 4G systemsfabricated in 28 nm FD-SOI technology is presented in Paper-V. The designis implemented with a configurable architecture and measurements show thatcircuit tuning results in a highly energy efficient processor, requiring 0.2 nJ to1.3 nJ for each QRD. Finally, these adaptive channel-aware signal processingconcepts are examined in the scope of the next generation of communicationsystems. Massive MIMO systems increase spectral efficiency by using a largenumber of antennas at the base station. Consequently, the signal processingat the base station has a high computational count. Paper-VI presents a configurable detection scheme which reduces this complexity by using techniquessuch as selective user detection and interpolation based signal processing. Hardware is optimized for resource sharing, resulting in a highly reconfigurable andenergy efficient uplink signal detector

Realization Limits of Impulse-Radio UWB Indoor Localization Systems

In this work, the realization limits of an impulse-based Ultra-Wideband (UWB) localization system for indoor applications have been thoroughly investigated and verified by measurements. The analysis spans from the position calculation algorithms, through hardware realization and modeling, up to the localization experiments conducted in realistic scenarios. The main focus was put on identification and characterization of limiting factors as well as developing methods to overcome them

COMPUTATIONAL ANALYSIS OF CODE-MULTIPLEXED COULTER SENSOR SIGNALS

Nowadays, lab-on-a-chip (LoC) technology has been applied in a variety of applications because of its capability to perform accurate microscale manipulations of cells for point-of-care diagnostics. On the other hand, such a result is not readily available from an LoC device and typically still requires a post-inspection of the chip using traditional laboratory equipment such as a microscope, negating the advantages of the LoC technology. To solve this dilemma, my doctoral research mainly focuses on developing portable and disposable biosensors for interfacing with and digitizing the information from an LoC system. Our sensor platform, integrated with multiple microfluidic impedance sensors, electrically monitors and tracks manipulated cells on an LoC device. The sensor platform compresses information from each sensor into a 1-dimensional electrical waveform, and therefore, further signal processing is required to recover the readout of each sensor and extract information of detected cells. Furthermore, with the capability of the sensor platform, we have introduced integrated microfluidic cytometers to characterize properties of cells such as cell surface expression and mechanical properties.Ph.D

Performance Analysis of the Modernized GNSS Signal Acquisition

Since the development of the GPS, the global navigation satellite systems (GNSS) have been widely diversified: maintenance, modernization and deployment of new systems such as the European Galileo. In addition, the number of GNSS signals applications, based on the use of GNSS signals, is increasing. To meet these new challenges and requirements, GNSS receivers are constantly evolving. A new trend is the development of software receiver which processes the GNSS signal in a software way unlike hardware receiver, equipping our vehicles, smartphones, for example. This thesis is part of a common project between a laboratory and a company, consisting of the development of a software receiver tracking GPS L1 C/A and Galileo E1 OS. The more specific aim of the thesis is to study the acquisition, first signal processing which provides a rough estimation of the incoming signal parameters. This work focuses particularly the low power signals, an acquisition threshold is set at 27 dB-Hz considered as a representative of urban or degraded environments. It is important to note that the success of the acquisition of such signals should be at least 9 times out of 10, without any aid or knowledge of almanac or ephemeris. Initially, a solid theoretical study of the acquisition performance and sources of degradation is conducted. One of them is the bit transitions due to the presence of the navigation message and the secondary code on pilot component of the new signals. It is thus highlighted the need to use a Transition-Insensitive acquisition method. Secondly, an innovative method, the Double-Block Zero-Padding Transition-Insensitive (DBZPTI) is developed to permit efficiently the acquisition of Galileo E1 OS signal. It takes part in the development of the global acquisition strategy, which should provide an estimate of the Doppler frequency and code delay, fine and reliable, for a satisfactory signal tracking