Primena tehnika kombinovanja kod bežičnih telekomunikacionih sistema u prisustvu smetnje

Research results shown in this thesis consider selection combining space diversity systems. Weibull fading model is used to describe a desired signal and interference in a wireless telecommunication channel. In an interference-limited environment, like a cellular communication system, the level of cochannel interference is sufficiently high compared to noise so that it can be neglected. In that case, a selection combining receiver can employ different combining algorithms, that can be used to forward the chosen signal to the output of the receiver. After the theoretical basis, which is given at the beginning of the thesis, a detailed analysis of space diversity systems that use different selection algorithms is presented. The system performance is analyzed using one of the proposed criteria: maximal signal-tointerference ratio, maximal desired signal, maximal total signal, and minimal interference. For a system employing each of these algorithms, a detailed analysis of statistical characteristics of first and second order is given using the expressions derived in this thesis. The first focus is on deriving the expressions for probability density function of instantaneous signal-to-interference ratio at the output of selection combining receiver employing each of the previously mentioned algorithms. Based on the derived expressions, numerical results are presented for statistical characteristics of the first order, namely outage probability, average bit error probability, average signal-to-interference ratio and channel capacity. Additionally, for the statistical characteristics of the second order, which are level crossing rate and average fade duration, expressions for joint probability density function of instantaneous signal-tointerference ratio and its time derivative are derived. A new mathematical approach for obtaining analytical expression for probability density function of instantaneous signal-to-interference ratio at the output of selection combining receiver with two branches that uses maximal signal-to-noise ratio algorithm is presented. Considering that mobile terminals are relatively small, the distance between receiving antennas is not large enough to be neglected. Therefore, the correlation between the branches is included in the analysis of statistical characteristics of the first order. Due to easier mathematical manipulation, statistical characteristics of second order do not consider correlation between receiving branches. Numerical results obtained using the expressions derived in this thesis for different decision algorithms are presented graphically. The illustrations show the influence of fading severity, correlation between the desired signals, as well as the interfering ones and balanced and unbalanced inputs for each of mentioned algorithms on outage probability, average bit error probability, average signal-to-interference ratio and channel capacity. The results for second order statistics for dual branch selection diversity system operating in Weibull fading environment were compared for a system that employs two selection algorithms, algorithm based on maximal signal-to-interference ratio, as most frequently used one, and algorithm based on minimal interference, the algorithm that was not exploited in literature. The main contribution of this thesis lies in obtained results for statistical characteristics and performance of the system that uses four proposed algorithms at receiver side. The presented analysis of selection diversity system for given channel conditions can be applied to achieve optimized solutions of wireless system design

Interference Mitigation in Wireless Communications

The primary objective of this thesis is to design advanced interference resilient schemes for asynchronous slow frequency hopping wireless personal area networks (FH-WPAN) and time division multiple access (TDMA) cellular systems in interference dominant environments. We also propose an interference-resilient power allocation method for multiple-input-multiple-output (MIMO) systems. For asynchronous FH-WPANs in the presence of frequent packet collisions, we propose a single antenna interference canceling dual decision feedback (IC-DDF) receiver based on joint maximum likelihood (ML) detection and recursive least squares (RLS) channel estimation. For the system level performance evaluation, we propose a novel geometric method that combines bit error rate (BER) and the spatial distribution of the traffic load of CCI for the computation of packet error rate (PER). We also derived the probabilities of packet collision in multiple asynchronous FH-WPANs with uniform and nonuniform traffic patterns. For the design of TDMA receivers resilient to CCI in frequency selective channels, we propose a soft output joint detection interference rejection combining delayed decision feedback sequence estimation (JD IRC-DDFSE) scheme. In the proposed scheme, IRC suppresses the CCI, while DDFSE equalizes ISI with reduced complexity. Also, the soft outputs are generated from IRC-DDFSE decision metric to improve the performance of iterative or non-iterative type soft-input outer code decoders. For the design of interference resilient power allocation scheme in MIMO systems, we investigate an adaptive power allocation method using subset antenna transmission (SAT) techniques. Motivated by the observation of capacity imbalance among the multiple parallel sub-channels, the SAT method achieves high spectral efficiency by allocating power on a selected transmit antenna subset. For 4 x 4 V-BLAST MIMO systems, the proposed scheme with SAT showed analogous results. Adaptive modulation schemes combined with the proposed method increase the capacity gains. From a feasibility viewpoint, the proposed method is a practical solution to CCI-limited MIMO systems since it does not require the channel state information (CSI) of CCI.Ph.D.Committee Chair: Professor Gordon L. StBe

Performanse bežičnog telekomunikacionog sistema u prisustvu n-m fedinga

In this thesis characteristics of wireless communication system operating over η-μ fading channel are considered together with diversity reception techniques which reduce the influence of η-μ fading on the system’s outage probability, average bit error rate, channel capacity, level crossing rate and average fade duration. Performance improvement is very significant within radio systems operating into cell network configuration. Cell network configuration realization could be used for increasing capacity of wireless communication system. With the increase of number of cells, i.e. with reducing the surface area of each cell, channel capacity increases. With the increase of number of cells, co-channel interference level increase, which degrades system performance values. In this work the compromise between the system capacity and reception quality is inquired. By applying diversity reception techniques, system performance values, degraded by the influences of slow fading, multipath fading and co-channel interference, are improved, so it is possible to reduce the cell area and to increase system capacity. In the second part of Phd thesis, various distributions for modeling the envelope variations in fading channels have been presented, cases in which these models are used have been pointed out, and advantages and imperfections of corresponding models for corresponding propagation scenarios have been presented. In third chapter, statistical characteristics of the first order of η-μ random variable, α-η-μ random variable and squared η-μ random variable are considered. For each mentioned variables, expressions for probability density function, cumulative distributive function, characteristic function and moments have been derived. Also for each observed case sum of two random variables, product of two random variables, ratio of two random variables, maximal value of two random variables and minimum value of two random variables have been determined. Obtained results are used for determining performances of wirelles reception with applied diversity technique for mitigation fading influence on system performances. Based on obtained expressions, graphs are depicted for probability density functions and cumulative distribution functions for the various values of propagation environment parameters. Probability density function and cumulative distribution function values are also graphically presented for α-η-μ random variable in the function of α and μ parameter change. For the purpose of performance analysis in η-μ fading environment, in the fourth chapter have been considered transformations of three η-μ random variables. Based on presented transformations of η-μ random variables, transmission performances estimation has been conducted, for the η-μ fading channel. Estimation of signal performances for the cases when diversity techniques are applied are carried out based on standard signal performance measures, i.e. outage probability (OP), average bit error probability (ABER), for observed modulation format and channel capacity. Graphically are presented ABER values for various values of system parameters when transmission is carried out with different modulation formats. By comparing obtained values it can be seen received signal performance improvement for the cases when diversity techniques are apliied over the reception case when there is no diversity technique applied. In the fifth chapter statistical characteristics of the second order of η-μ radnom proccess, and random proccesses which represent various variations of η-μ radnom proccess, are considered. Brand new random proccesses, for describing fading in special channel conditions are fromed. For all this cases level crossing rates are determined. In the sixth chapter of this Phd thesis are considered wireless communication systems with reception with applied diversity techniques for mitigating the influence of η-μ fading on system performances. Space diveristy technique has been used. Useful signals are accepted at the antennas, envelopes of these signals are combined and decision is made based on the signal values at the combiner outputs. System performances are determined for the cases of SC and MRC combining. For bouth cases probability density function and cumulative distribution function of the signal at the combiners outouts are derived, as well as the average bit error rate for the various used modualtion formats and level crossing rate. Results for ABER for various modulation formats are graphically presented as well as the improvement of the outage probability at the reception obtained by applying SC with two reception branches. In this part it has also been considered the case when bouth desired and interferring signal are described with η-μ distribution, as well as the case when desired signal has been described with η-μ distribution while interference has been described with κ-μ distribution. In the seventh chapter macrodiversity sistem with SC reception and two MRC microdiversity combiners has been considered. At the inputs at the microdiversity combiners η-μ fading is present, while at the inputs as macrodiversity combiners slow Gamma fading is present. For this model of system it has been calculated probability density function, cumulative distribution function, characteristic function, moments, variance, outage probability and level crossing rate for the signal at the macrodiversity combiner output. Results obtained for level croosing rate at the macrodiversity combiner output are graphically presented

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression

Performance evaluation of fixed WiMax physical layer under high fading channels

This thesis was submitted for the degree of Master of Philosophy and awarded by Brunel University.A radio channel characteristic modelling is essential in every network planning. This project deals with the performance of WiMax networks in an outdoor environment while using fading channel models. The radio channels characteristics are analyzed by simulations have been done using Matlab programming. Stanford University Interim(SUI) Channels set was proposed to simulate the fixed broadband wireless access channel environments where IEEE 802.16d is to be deployed. It has six channel models that are grouped into three categories according to three typical different outdoor Terrains, in order to give a comprehensive study of fading channels on the overall performance of the system, WiMax system has been tested under SUI channels that modified into account for 30o directional antennas, with 90% cell coverage and with 99.9% reliability in its geographical covered area. Furthermore, in order to combat the fading which occurs in urban areas and improve the capacity and the throughput of the system, multiples antennas at both ends of communication link are used, the transmission gain obtained when using multiple antennas instead of only a single antenna. Space-time coding and maximum ratio combining for more than one transmit and receive antenna is implemented to allow performance investigations in various MIMO scenarios. It has been concluded that uses multiple antennas at the receiver offers a significant improvement of 3 dB of gain in the channel SNR. This thesis also contain implementation of all compulsory features of the WiMax OFDM physical layer specified in IEEE 802.16-2004 using Matlab coding. In order to combat the temporal variations in quality on a multipath fading channel, an adaptive modulation technique is used. This technique employs multiple modulation schemes to instantaneously adapt to the variations in the channel SNR, thus maximizing the system throughput and improving BER performance. WiMax transceiver has been tested with and without encoding and studied the effect of encoding on multipath channel. Testing the system with flexible channel bandwidth has been part of this thesis. Finally it has been explained in this thesis the affect of increasing the size of cyclic prefix on overall performance of WiMax system

Joint transceiver design and power optimization for wireless sensor networks in underground mines

Avec les grands développements des technologies de communication sans fil, les réseaux de capteurs sans fil (WSN) ont attiré beaucoup d’attention dans le monde entier au cours de la dernière décennie. Les réseaux de capteurs sans fil sont maintenant utilisés pour a surveillance sanitaire, la gestion des catastrophes, la défense, les télécommunications, etc. De tels réseaux sont utilisés dans de nombreuses applications industrielles et commerciales comme la surveillance des processus industriels et de l’environnement, etc. Un réseau WSN est une collection de transducteurs spécialisés connus sous le nom de noeuds de capteurs avec une liaison de communication distribuée de manière aléatoire dans tous les emplacements pour surveiller les paramètres. Chaque noeud de capteur est équipé d’un transducteur, d’un processeur de signal, d’une unité d’alimentation et d’un émetteur-récepteur. Les WSN sont maintenant largement utilisés dans l’industrie minière souterraine pour surveiller certains paramètres environnementaux, comme la quantité de gaz, d’eau, la température, l’humidité, le niveau d’oxygène, de poussière, etc. Dans le cas de la surveillance de l’environnement, un WSN peut être remplacé de manière équivalente par un réseau à relais à entrées et sorties multiples (MIMO). Les réseaux de relais multisauts ont attiré un intérêt de recherche important ces derniers temps grâce à leur capacité à augmenter la portée de la couverture. La liaison de communication réseau d’une source vers une destination est mise en oeuvre en utilisant un schéma d’amplification/transmission (AF) ou de décodage/transfert (DF). Le relais AF reçoit des informations du relais précédent et amplifie simplement le signal reçu, puis il le transmet au relais suivant. D’autre part, le relais DF décode d’abord le signal reçu, puis il le transmet au relais suivant au deuxième étage s’il peut parfaitement décoder le signal entrant. En raison de la simplicité analytique, dans cette thèse, nous considérons le schéma de relais AF et les résultats de ce travail peuvent également être développés pour le relais DF. La conception d’un émetteur/récepteur pour le relais MIMO multisauts est très difficile. Car à l’étape de relais L, il y a 2L canaux possibles. Donc, pour un réseau à grande échelle, il n’est pas économique d’envoyer un signal par tous les liens possibles. Au lieu de cela, nous pouvons trouver le meilleur chemin de la source à la destination qui donne le rapport signal sur bruit (SNR) de bout en bout le plus élevé. Nous pouvons minimiser la fonction objectif d’erreur quadratique moyenne (MSE) ou de taux d’erreur binaire (BER) en envoyant le signal utilisant le chemin sélectionné. L’ensemble de relais dans le chemin reste actif et le reste des relais s’éteint, ce qui permet d’économiser de l’énergie afin d’améliorer la durée de vie du réseau. Le meilleur chemin de transmission de signal a été étudié dans la littérature pour un relais MIMO à deux bonds mais est plus complexe pour un ...With the great developments in wireless communication technologies, Wireless Sensor Networks (WSNs) have gained attention worldwide in the past decade and are now being used in health monitoring, disaster management, defense, telecommunications, etc. Such networks are used in many industrial and consumer applications such as industrial process and environment monitoring, among others. A WSN network is a collection of specialized transducers known as sensor nodes with a communication link distributed randomly in any locations to monitor environmental parameters such as water level, and temperature. Each sensor node is equipped with a transducer, a signal processor, a power unit, and a transceiver. WSNs are now being widely used in the underground mining industry to monitor environmental parameters, including the amount of gas, water, temperature, humidity, oxygen level, dust, etc. The WSN for environment monitoring can be equivalently replaced by a multiple-input multiple-output (MIMO) relay network. Multi-hop relay networks have attracted significant research interest in recent years for their capability in increasing the coverage range. The network communication link from a source to a destination is implemented using the amplify-and-forward (AF) or decode-and-forward (DF) schemes. The AF relay receives information from the previous relay and simply amplifies the received signal and then forwards it to the next relay. On the other hand, the DF relay first decodes the received signal and then forwards it to the next relay in the second stage if it can perfectly decode the incoming signal. For analytical simplicity, in this thesis, we consider the AF relaying scheme and the results of this work can also be developed for the DF relay. The transceiver design for multi-hop MIMO relay is very challenging. This is because at the L-th relay stage, there are 2L possible channels. So, for a large scale network, it is not economical to send the signal through all possible links. Instead, we can find the best path from source-to-destination that gives the highest end-to-end signal-to-noise ratio (SNR). We can minimize the mean square error (MSE) or bit error rate (BER) objective function by sending the signal using the selected path. The set of relay in the path remains active and the rest of the relays are turned off which can save power to enhance network life-time. The best path signal transmission has been carried out in the literature for 2-hop MIMO relay and for multiple relaying it becomes very complex. In the first part of this thesis, we propose an optimal best path finding algorithm at perfect channel state information (CSI). We consider a parallel multi-hop multiple-input multiple-output (MIMO) AF relay system where a linear minimum mean-squared error (MMSE) receiver is used at the destination. We simplify the parallel network into equivalent series multi-hop MIMO relay link using best relaying, where the best relay ..

Adaptive parallel interference cancellation receivers with diversity combining for multicarrier DS CDMA systems

Master'sMASTER OF ENGINEERIN