Cybernetic automata: An approach for the realization of economical cognition for multi-robot systems

The multi-agent robotics paradigm has attracted much attention due to the variety of pertinent applications that are well-served by the use of a multiplicity of agents (including space robotics, search and rescue, and mobile sensor networks). The use of this paradigm for most applications, however, demands economical, lightweight agent designs for reasons of longer operational life, lower economic cost, faster and easily-verified designs, etc. An important contributing factor to an agent’s cost is its control architecture. Due to the emergence of novel implementation technologies carrying the promise of economical implementation, we consider the development of a technology-independent specification for computational machinery. To that end, the use of cybernetics toolsets (control and dynamical systems theory) is appropriate, enabling a principled specifi- cation of robotic control architectures in mathematical terms that could be mapped directly to diverse implementation substrates. This dissertation, hence, addresses the problem of developing a technologyindependent specification for lightweight control architectures to enable robotic agents to serve in a multi-agent scheme. We present the principled design of static and dynamical regulators that elicit useful behaviors, and integrate these within an overall architecture for both single and multi-agent control. Since the use of control theory can be limited in unstructured environments, a major focus of the work is on the engineering of emergent behavior. The proposed scheme is highly decentralized, requiring only local sensing and no inter-agent communication. Beyond several simulation-based studies, we provide experimental results for a two-agent system, based on a custom implementation employing field-programmable gate arrays

A new Measure for Optimization of Field Sensor Network with Application to LiDAR

This thesis proposes a solution to the problem of modeling and optimizing the field sensor network in terms of the coverage performance. The term field sensor is referred to a class of sensors which can detect the regions in 2D/3D spaces through non-contact measurements. The most widely used field sensors include cameras, LiDAR, ultrasonic sensor, and RADAR, etc. The key challenge in the applications of field sensor networks, such as area coverage, is to develop an effective performance measure, which has to involve both sensor and environment parameters. The nature of space distribution in the case of the field sensor incurs a great deal of difficulties for such development and, hence, poses it as a very interesting research problem. Therefore, to tackle this problem, several attempts have been made in the literature. However, they have failed to address a comprehensive and applicable approach to distinctive types of field sensors (in 3D), as only coverage of a particular sensor is usually addressed at the time. In addition, no coverage model has been proposed yet for some types of field sensors such as LiDAR sensors. In this dissertation, a coverage model is obtained for the field sensors based on the transformation of sensor and task parameters into the sensor geometric model. By providing a mathematical description of the sensor’s sensing region, a performance measure is introduced which characterizes the closeness between a single sensor and target configurations. In this regard, the first contribution is developing an Infinity norm based measure which describes the target distance to the closure of the sensing region expressed by an area-based approach. The second contribution can be geometrically interpreted as mapping the sensor’s sensing region to an n-ball using a homeomorphism map and developing a performance measure. The third contribution is introducing the measurement principle and establishing the coverage model for the class of solid-state (flash) LiDAR sensors. The fourth contribution is point density analysis and developing the coverage model for the class of mechanical (prism rotating mechanism) LiDAR sensors. Finally, the effectiveness of the proposed coverage model is illustrated by simulations, experiments, and comparisons is carried out throughout the dissertation. This coverage model is a powerful tool as it applies to the variety of field sensors

Software Defined Networks based Smart Grid Communication: A Comprehensive Survey

The current power grid is no longer a feasible solution due to ever-increasing user demand of electricity, old infrastructure, and reliability issues and thus require transformation to a better grid a.k.a., smart grid (SG). The key features that distinguish SG from the conventional electrical power grid are its capability to perform two-way communication, demand side management, and real time pricing. Despite all these advantages that SG will bring, there are certain issues which are specific to SG communication system. For instance, network management of current SG systems is complex, time consuming, and done manually. Moreover, SG communication (SGC) system is built on different vendor specific devices and protocols. Therefore, the current SG systems are not protocol independent, thus leading to interoperability issue. Software defined network (SDN) has been proposed to monitor and manage the communication networks globally. This article serves as a comprehensive survey on SDN-based SGC. In this article, we first discuss taxonomy of advantages of SDNbased SGC.We then discuss SDN-based SGC architectures, along with case studies. Our article provides an in-depth discussion on routing schemes for SDN-based SGC. We also provide detailed survey of security and privacy schemes applied to SDN-based SGC. We furthermore present challenges, open issues, and future research directions related to SDN-based SGC.Comment: Accepte

Autonomous Satellite Command and Control through the World Wide Web: Phase 3

NASA's New Millenium Program (NMP) has identified a variety of revolutionary technologies that will support orders of magnitude improvements in the capabilities of spacecraft missions. This program's Autonomy team has focused on science and engineering automation technologies. In doing so, it has established a clear development roadmap specifying the experiments and demonstrations required to mature these technologies. The primary developmental thrusts of this roadmap are in the areas of remote agents, PI/operator interface, planning/scheduling fault management, and smart execution architectures. Phases 1 and 2 of the ASSET Project (previously known as the WebSat project) have focused on establishing World Wide Web-based commanding and telemetry services as an advanced means of interfacing a spacecraft system with the PI and operators. Current automated capabilities include Web-based command submission, limited contact scheduling, command list generation and transfer to the ground station, spacecraft support for demonstrations experiments, data transfer from the ground station back to the ASSET system, data archiving, and Web-based telemetry distribution. Phase 2 was finished in December 1996. During January-December 1997 work was commenced on Phase 3 of the ASSET Project. Phase 3 is the subject of this report. This phase permitted SSDL and its project partners to expand the ASSET system in a variety of ways. These added capabilities included the advancement of ground station capabilities, the adaptation of spacecraft on-board software, and the expansion of capabilities of the ASSET management algorithms. Specific goals of Phase 3 were: (1) Extend Web-based goal-level commanding for both the payload PI and the spacecraft engineer; (2) Support prioritized handling of multiple PIs as well as associated payload experimenters; (3) Expand the number and types of experiments supported by the ASSET system and its associated spacecraft; (4) Implement more advanced resource management, modeling and fault management capabilities that integrate the space and ground segments of the space system hardware; (5) Implement a beacon monitoring test; (6) Implement an experimental blackboard controller for space system management; (7) Further define typical ground station developments required for Internet-based remote control and for full system automation of the PI-to-spacecraft link. Each of those goals is examined in the next section. Significant sections of this report were also published as a conference paper

Improved utilization for “smart parking systems” based on paging technique

Considering the rapid urbanization and the road congestion, the development of smart parking solutions becomes more crucial, especially in terms of economic interests. Thanks to IoT-connectivity and the cloud-integrated platforms, drivers can easily find a vacant parking lot with smart parking services. This paper intervenes in the profit of parking management systems. The paper proposes a new technique “paging technique” which increases the utilization factor of parking slots. The proposed method takes advantage of the idle time that exists between two successful parking services in the same slot. Besides, it investigates the possibility of using the idle times from different parking slots to provide a continuous parking time for an additional car. The paging technique is optimally implemented using mixed-integer linear programming that maximizes the utilization factor for the parking slots with minimum car transitions. Moreover, a data model for the parking management system has been constructed while considering the three major customers, namely, regular, prepaid, and walk-in customers. The difference between fixed and dynamic pricing for parking has been investigated. The technique has been validated using GAMS optimization software and hardware using DSP with Coin-or branch and cut solver (CBC) under real-life conditions. The statistical results prove that the revenue for the proposed parking system has increased significantly. Finally, a comparative analysis is performed, benchmarking our proposed method against recent competing algorithms in real world applications to demonstrate its superiority

Intelligent and Efficient Transport Systems

The aim of this book is to present a number of digital and technology solutions to real-world problems across transportation sectors and infrastructures. Nine chapters have been well prepared and organized with the core topics as follows: -A guideline to evaluate the energy efficiency of a vehicle -A guideline to design and evaluate an electric propulsion system -Potential opportunities for intelligent transportation systems and smart cities -The importance of system control and energy-power management in transportation systems and infrastructures -Bespoke modeling tools and real-time simulation platforms for transportation system development This book will be useful to a wide range of audiences: university staff and students, engineers, and business people working in relevant fields

Power and Energy Student Summit 2019: 9 – 11 July 2019 Otto von Guericke University Magdeburg ; Conference Program

The book includes a short description of the conference program of the "Power and Energy Student Summit 2019". The conference, which is orgaized for students in the area of electric power systems, covers topics such as renewable energy, high voltage technology, grid control and network planning, power quality, HVDC and FACTS as well as protection technology. Besides the overview of the conference venue, activites and the time schedule, the book includes all papers presented at the conference

Small satellites and CubeSats: survey of structures, architectures, and protocols

The space environment is still challenging but is becoming more and more attractive for an increasing number of entities. In the second half of the 20th century, a huge amount of funds was required to build satellites and gain access to space. Nowadays, it is no longer so. The advancement of technologies allows producing very small hardware components able to survive the strict conditions of the outer space. Consequently, small satellites can be designed for a wide set of missions keeping low design times, production costs, and deployment costs. One widely used type of small satellite is the CubeSat, whose different aspects are surveyed in the following: mission goals, hardware subsystems and components, possible network topologies, channel models, and suitable communication protocols. We also show some future challenges related to the employment of CubeSat networks

Multi-Criteria Performance Evaluation and Control in Power and Energy Systems

The role of intuition and human preferences are often overlooked in autonomous control of power and energy systems. However, the growing operational diversity of many systems such as microgrids, electric/hybrid-electric vehicles and maritime vessels has created a need for more flexible control and optimization methods. In order to develop such flexible control methods, the role of human decision makers and their desired performance metrics must be studied in power and energy systems. This dissertation investigates the concept of multi-criteria decision making as a gateway to integrate human decision makers and their opinions into complex mathematical control laws. There are two major steps this research takes to algorithmically integrate human preferences into control environments: MetaMetric (MM) performance benchmark: considering the interrelations of mathematical and psychological convergence, and the potential conflict of opinion between the control designer and end-user, a novel holistic performance benchmark, denoted as MM, is developed to evaluate control performance in real-time. MM uses sensor measurements and implicit human opinions to construct a unique criterion that benchmarks the system\u27s performance characteristics. MM decision support system (DSS): the concept of MM is incorporated into multi-objective evolutionary optimization algorithms as their DSS. The DSS\u27s role is to guide and sort the optimization decisions such that they reflect the best outcome desired by the human decision-maker and mathematical considerations. A diverse set of case studies including a ship power system, a terrestrial power system, and a vehicular traction system are used to validate the approaches proposed in this work. Additionally, the MM DSS is designed in a modular way such that it is not specific to any underlying evolutionary optimization algorithm