Multi - level classification and formulation of an integration framework for estimation/ communication/ computation (EC2) co-design

This report is an overview of the research activities regarding the WP06 (C4E co-design) of the FeedNetBack European project for the first six months of the year 2010 at INRIA. The research team consists of Post Doctoral Fellow Alireza Farhadi and Director Carlos Canudas de Wit. In preparing this report we had: a) A meeting with our industrial partner Ifremer. b) A three days visit at the University of Padova (UNIPD), Italy. c) A short discussion with our industrial partner Videotech. d) Long discussions with Sandro Zampieri and Luca Schenato from UNIPD. We also received some results from our colleagues working in ETH (Swiss).The objective of the FeedNetBack project is to propose a co-design framework, which allows the integration of control-estimation, communication, computation, complexity, and energy in networked control systems. This co-design framework is developed for the following case studies: a) A fleet of Autonomous Underwater Vehicles (AUVs) b) Intelligent camera networks for motion capture c) Surveillance systems using a network of smart cameras. The three case studies have been selected to demonstrate the wide spectrum of possible applications of the FeedNetBack project: From systems with relatively few, highly mobile nodes, communicating over a network subject to communication imperfections; to systems with a very high number of immobile nodes, with high available bandwidth but also high computation requirements (smart camera network for surveillance applications and motion capture). To create such a co-design framework we first need to fully understand the constraints imposed by control, communication, computation, complexity, and energy on the above case studies. This is the first objective of this report. The second objective is to formulate an estimation/ communication/ computation co-design framework which is applicable to the above case studies. To achieve these goals, in Section 1, we study fleet of AUVs; and following our discussions with Ifremer, we identify the interactions between control, communication, computation, etc. in this case study. In Section 2, we study smart networks of cameras for motion capture; and following our discussions with Sandro Zampieri and Luca Schenato, we identify the interactions between different components (control, communication, etc.). In Section 3, we study smart networks of cameras for surveillance applications; and following our discussions with Videotech, Sandro Zampieri and Luca Schenato, we identify the interactions between different components. Then, in Section 4, based on this studies, we formulate an integration framework for estimation/ communication/ computation co-design which is applicable to fleet of AUVs and smart camera network for surveillance applications

Computational models of object motion detectors accelerated using FPGA technology

The detection of moving objects is a trivial task when performed by vertebrate retinas, yet a complex computer vision task. This PhD research programme has made three key contributions, namely: 1) a multi-hierarchical spiking neural network (MHSNN) architecture for detecting horizontal and vertical movements, 2) a Hybrid Sensitive Motion Detector (HSMD) algorithm for detecting object motion and 3) the Neuromorphic Hybrid Sensitive Motion Detector (NeuroHSMD) , a real-time neuromorphic implementation of the HSMD algorithm. The MHSNN is a customised 4 layers Spiking Neural Network (SNN) architecture designed to reflect the basic connectivity, similar to canonical behaviours found in the majority of vertebrate retinas (including human retinas). The architecture, was trained using images from a custom dataset generated in laboratory settings. Simulation results revealed that each cell model is sensitive to vertical and horizontal movements, with a detection error of 6.75% contrasted against the teaching signals (expected output signals) used to train the MHSNN. The experimental evaluation of the methodology shows that the MH SNN was not scalable because of the overall number of neurons and synapses which lead to the development of the HSMD. The HSMD algorithm enhanced an existing Dynamic Background subtraction (DBS) algorithm using a customised 3-layer SNN. The customised 3-layer SNN was used to stabilise the foreground information of moving objects in the scene, which improves the object motion detection. The algorithm was compared against existing background subtraction approaches, available on the Open Computer Vision (OpenCV) library, specifically on the 2012 Change Detection (CDnet2012) and the 2014 Change Detection (CDnet2014) benchmark datasets. The accuracy results show that the HSMD was ranked overall first and performed better than all the other benchmarked algorithms on four of the categories, across all eight test metrics. Furthermore, the HSMD is the first to use an SNN to enhance the existing dynamic background subtraction algorithm without a substantial degradation of the frame rate, being capable of processing images 720 × 480 at 13.82 Frames Per Second (fps) (CDnet2014) and 720 × 480 at 13.92 fps (CDnet2012) on a High Performance computer (96 cores and 756 GB of RAM). Although the HSMD analysis shows good Percentage of Correct Classifications (PCC) on the CDnet2012 and CDnet2014, it was identified that the 3-layer customised SNN was the bottleneck, in terms of speed, and could be improved using dedicated hardware. The NeuroHSMD is thus an adaptation of the HSMD algorithm whereby the SNN component has been fully implemented on dedicated hardware [Terasic DE10-pro Field-Programmable Gate Array (FPGA) board]. Open Computer Language (OpenCL) was used to simplify the FPGA design flow and allow the code portability to other devices such as FPGA and Graphical Processing Unit (GPU). The NeuroHSMD was also tested against the CDnet2012 and CDnet2014 datasets with an acceleration of 82% over the HSMD algorithm, being capable of processing 720 × 480 images at 28.06 fps (CDnet2012) and 28.71 fps (CDnet2014)

NASA Tech Briefs, September 2012

Topics covered include: Beat-to-Beat Blood Pressure Monitor; Measurement Techniques for Clock Jitter; Lightweight, Miniature Inertial Measurement System; Optical Density Analysis of X-Rays Utilizing Calibration Tooling to Estimate Thickness of Parts; Fuel Cell/Electrochemical Cell Voltage Monitor; Anomaly Detection Techniques with Real Test Data from a Spinning Turbine Engine-Like Rotor; Measuring Air Leaks into the Vacuum Space of Large Liquid Hydrogen Tanks; Antenna Calibration and Measurement Equipment; Glass Solder Approach for Robust, Low-Loss, Fiber-to-Waveguide Coupling; Lightweight Metal Matrix Composite Segmented for Manufacturing High-Precision Mirrors; Plasma Treatment to Remove Carbon from Indium UV Filters; Telerobotics Workstation (TRWS) for Deep Space Habitats; Single-Pole Double-Throw MMIC Switches for a Microwave Radiometer; On Shaft Data Acquisition System (OSDAS); ASIC Readout Circuit Architecture for Large Geiger Photodiode Arrays; Flexible Architecture for FPGAs in Embedded Systems; Polyurea-Based Aerogel Monoliths and Composites; Resin-Impregnated Carbon Ablator: A New Ablative Material for Hyperbolic Entry Speeds; Self-Cleaning Particulate Prefilter Media; Modular, Rapid Propellant Loading System/Cryogenic Testbed; Compact, Low-Force, Low-Noise Linear Actuator; Loop Heat Pipe with Thermal Control Valve as a Variable Thermal Link; Process for Measuring Over-Center Distances; Hands-Free Transcranial Color Doppler Probe; Improving Balance Function Using Low Levels of Electrical Stimulation of the Balance Organs; Developing Physiologic Models for Emergency Medical Procedures Under Microgravity; PMA-Linked Fluorescence for Rapid Detection of Viable Bacterial Endospores; Portable Intravenous Fluid Production Device for Ground Use; Adaptation of a Filter Assembly to Assess Microbial Bioburden of Pressurant Within a Propulsion System; Multiplexed Force and Deflection Sensing Shell Membranes for Robotic Manipulators; Whispering Gallery Mode Optomechanical Resonator; Vision-Aided Autonomous Landing and Ingress of Micro Aerial Vehicles; Self-Sealing Wet Chemistry Cell for Field Analysis; General MACOS Interface for Modeling and Analysis for Controlled Optical Systems; Mars Technology Rover with Arm-Mounted Percussive Coring Tool, Microimager, and Sample-Handling Encapsulation Containerization Subsystem; Fault-Tolerant, Real-Time, Multi-Core Computer System; Water Detection Based on Object Reflections; SATPLOT for Analysis of SECCHI Heliospheric Imager Data; Plug-in Plan Tool v3.0.3.1; Frequency Correction for MIRO Chirp Transformation Spectroscopy Spectrum; Nonlinear Estimation Approach to Real-Time Georegistration from Aerial Images; Optimal Force Control of Vibro-Impact Systems for Autonomous Drilling Applications; Low-Cost Telemetry System for Small/Micro Satellites; Operator Interface and Control Software for the Reconfigurable Surface System Tri-ATHLETE; and Algorithms for Determining Physical Responses of Structures Under Load