Simple and accurate empirical absolute volume calibration of a multi-sensor fringe projection system

This paper suggests a novel absolute empirical calibration method for a multi-sensor fringe projection system. The optical setup of the projector-camera sensor can be arbitrary. The term absolute calibration here means that the centre of the three dimensional coordinates in the resultant calibrated volume coincides with a preset centre to the three-dimensional real-world coordinate system. The use of a zero-phase fringe marking spot is proposed to increase depth calibration accuracy, where the spot centre is determined with sub-pixel accuracy. Also, a new method is proposed for transversal calibration. Depth and transversal calibration methods have been tested using both single sensor and three-sensor fringe projection systems. The standard deviation of the error produced by this system is 0.25 mm. The calibrated volume produced by this method is 400 mm×400 mm×140 m

Platform-based design, test and fast verification flow for mixed-signal systems on chip

This research is providing methodologies to enhance the design phase from architectural space exploration and system study to verification of the whole mixed-signal system. At the beginning of the work, some innovative digital IPs have been designed to develop efficient signal conditioning for sensor systems on-chip that has been included in commercial products. After this phase, the main focus has been addressed to the creation of a re-usable and versatile test of the device after the tape-out which is close to become one of the major cost factor for ICs companies, strongly linking it to model’s test-benches to avoid re-design phases and multi-environment scenarios, producing a very effective approach to a single, fast and reliable multi-level verification environment. All these works generated different publications in scientific literature. The compound scenario concerning the development of sensor systems is presented in Chapter 1, together with an overview of the related market with a particular focus on the latest MEMS and MOEMS technology devices, and their applications in various segments. Chapter 2 introduces the state of the art for sensor interfaces: the generic sensor interface concept (based on sharing the same electronics among similar applications achieving cost saving at the expense of area and performance loss) versus the Platform Based Design methodology, which overcomes the drawbacks of the classic solution by keeping the generality at the highest design layers and customizing the platform for a target sensor achieving optimized performances. An evolution of Platform Based Design achieved by implementation into silicon of the ISIF (Intelligent Sensor InterFace) platform is therefore presented. ISIF is a highly configurable mixed-signal chip which allows designers to perform an effective design space exploration and to evaluate directly on silicon the system performances avoiding the critical and time consuming analysis required by standard platform based approach. In chapter 3 we describe the design of a smart sensor interface for conditioning next generation MOEMS. The adoption of a new, high performance and high integrated technology allow us to integrate not only a versatile platform but also a powerful ARM processor and various IPs providing the possibility to use the platform not only as a conditioning platform but also as a processing unit for the application. In this chapter a description of the various blocks is given, with a particular emphasis on the IP developed in order to grant the highest grade of flexibility with the minimum area occupation. The architectural space evaluation and the application prototyping with ISIF has enabled an effective, rapid and low risk development of a new high performance platform achieving a flexible sensor system for MEMS and MOEMS monitoring and conditioning. The platform has been design to cover very challenging test-benches, like a laser-based projector device. In this way the platform will not only be able to effectively handle the sensor but also all the system that can be built around it, reducing the needed for further electronics and resulting in an efficient test bench for the algorithm developed to drive the system. The high costs in ASIC development are mainly related to re-design phases because of missing complete top-level tests. Analog and digital parts design flows are separately verified. Starting from these considerations, in the last chapter a complete test environment for complex mixed-signal chips is presented. A semi-automatic VHDL-AMS flow to provide totally matching top-level is described and then, an evolution for fast self-checking test development for both model and real chip verification is proposed. By the introduction of a Python interface, the designer can easily perform interactive tests to cover all the features verification (e.g. calibration and trimming) into the design phase and check them all with the same environment on the real chip after the tape-out. This strategy has been tested on a consumer 3D-gyro for consumer application, in collaboration with SensorDynamics AG

Design of an obstacle avoidance system for automated guided vehicles

Most Industrial Automated Guided Vehicles CAGV s) follow fixed guide paths embedded in the floor or bonded to the floor surface. Whilst reliable in their basic operation, these AGV systems fail if unexpected obstacles are placed in the vehicle path. This can be a problem particularly in semi-automated factories where men and AGVs share the same environment. The perfonnance of line-guided AGVs may therefore be enhanced with a capability to avoid unexpected obstructions in the guide path. The research described in this thesis addresses some fundamental problems associated with obstacle avoidance for utomated vehicles. A new obstacle avoidance system has been designed which operates by detecting obstacles as they disturb a light pattern projected onto the floor ahead of the AGV. A CCD camera mounted under the front of the vehicle senses obstacles as they emerge into the projection area and reflect the light pattern. Projected light patterns have been used as an aid to static image analysis in the fields f Computer Aided Design and Engineering. This research extends these ideas in a real-time mobile application. A novel light coding system has been designed which simplifies the image analysis task and allows a low-cost embedded microcontroller to carry out the image processing, code recognition and obstacle avoidance planning functions. An AGV simulation package has been developed as a design tool for obstacle avoidance algorithms. This enables potential strategies to be developed in a high level language and tested via a Graphical User Interface. The algorithms designed using the simulation package were successfully translated to assembler language and implemented on the embedded system. An experimental automated vehicle has been designed and built as a test bed for the research and the complete obstacle avoidance system was evaluated in the Flexible Manufacturing laboratory at the University of Huddersfield

Entertainment Device with Detection of Projectile Impact

Aspects of the present disclosure are directed to an entertainment device that includes a display that changes a displayed image based on detection of impacts on the display. For example, the entertainment device can include a large display area that displays a rectangular grid or some irregular pattern of geometric shape. Using impact sensors, the entertainment device can detect impact on the surface of the display area and change the image displayed on the display area in an area surrounding the portion of the display area on which the impact was detected