Rapid, Precise, and High-Sensitivity Acquisition of Paleomagnetic and Rock-Magnetic Data: Development of a Low-Noise Automatic Sample Changing System for Superconducting Rock Magnetometers

Among Earth sciences, paleomagnetism is particularly linked to the statistics of large sample sets as a matter of historical development and logistical necessity. Because the geomagnetic field varies over timescales relevant to sedimentary deposition and igneous intrusion, while the fidelity of recorded magnetization is modulated by original properties of rock units and by alteration histories, "ideal" paleomagnetic results measure remanent magnetizations of hundreds of samples at dozens of progressive demagnetization levels, accompanied by tests of magnetic composition on representative sister specimens. We present an inexpensive, open source system for automating paleomagnetic and rock magnetic measurements. Using vacuum pick-and-place technology and a quartz-glass sample holder, the system can in one hour measure remanent magnetizations, as weak as a few pAm2, of ~30 specimens in two vertical orientations with measurement errors comparable to those of the best manual systems. The system reduces the number of manual manipulations required per specimen ~8 fold

The design and implementation of vision-based behavioural modules for a robotic assembly system

The work drsrrihrd in this thesis ia about, how to program robots to work re liably in the presence of uncertainty. Some architectural principle!: are proposed which address the problem of decomposing robotic assembly tasks into modular units such that a robot program can be implemented efficiently, tested easily, and can be maintained or modified without undue complexity. This architecture also provides a framework to integrate sensors into a robotic, assembly system.These modular units arc called behavioural modules. They perforin their tasks reliably. The problem of uncertainty is dealt with by encapsulating sensing and variation reducing strategies inside these modules. Experiments are performed with a working robotic assembly system using vision based behavioural modules. Analy sis of this system validates the principles presented in this thesis

Basic set of behaviours for programming assembly robots

We know from the well established Church-Turing thesis that any computer program­ming language needs just a limited set of commands in order to perform any computable process. However, programming in these terms is so very inconvenient that a larger set of machine codes need to be introduced and on top of these higher programming languages are erected.In Assembly Robotics we could theoretically formulate any assembly task, in terms of moves. Nevertheless, it is as tedious and error prone to program assemblies at this low level as it would be to program a computer by using just Turing Machine commands.An interesting survey carried out in the beginning of the nineties showed that the most common assembly operations in manufacturing industry cluster in just seven classes. Since the research conducted in this thesis is developed within the behaviour-based assembly paradigm which views every assembly task as the external manifestation of the execution of a behavioural module, we wonder whether there exists a limited and ergonomical set of elementary modules with which to program at least 80% of the most common operations.IIn order to investigate such a problem, we set a project in which, taking into account the statistics of the aforementioned survey, we analyze the experimental behavioural decomposition of three significant assembly tasks (two similar benchmarks, the STRASS assembly, and a family of torches). From these three we establish a basic set of such modules.The three test assemblies with which we ran the experiments can not possibly exhaust ah the manufacturing assembly tasks occurring in industry, nor can the results gathered or the speculations made represent a theoretical proof of the existence of the basic set. They simply show that it is possible to formulate different assembly tasks in terms of a small set of about 10 modules, which may be regarded as an embryo of a basic set of elementary modules.Comparing this set with Kondoleon’s tasks and with Balch’s general-purpose robot routines, we observed that ours was general enough to represent 80% of the most com­mon manufacturing assembly tasks and ergonomical enough to be easily used by human operators or automatic planners. A final discussion shows that it would be possible to base an assembly programming language on this kind of set of basic behavioural modules

Advances in flexible manipulation through the application of AI-based techniques

282 p.Objektuak hartu eta uztea oinarrizko bi eragiketa dira ia edozein aplikazio robotikotan. Gaur egun, "pick and place" aplikazioetarako erabiltzen diren robot industrialek zeregin sinpleak eta errepikakorrak egiteko duten eraginkortasuna dute ezaugarri. Hala ere, sistema horiek oso zurrunak dira, erabat kontrolatutako inguruneetan lan egiten dute, eta oso kostu handia dakarte beste zeregin batzuk egiteko birprogramatzeak. Gaur egun, industria-ingurune desberdinetako zereginak daude (adibidez, logistika-ingurune batean eskaerak prestatzea), zeinak objektuak malgutasunez manipulatzea eskatzen duten, eta oraindik ezin izan dira automatizatu beren izaera dela-eta. Automatizazioa zailtzen duten botila-lepo nagusiak manipulatu beharreko objektuen aniztasuna, roboten trebetasun falta eta kontrolatu gabeko ingurune dinamikoen ziurgabetasuna dira.Adimen artifizialak (AA) gero eta paper garrantzitsuagoa betetzen du robotikaren barruan, robotei zeregin konplexuak betetzeko beharrezko adimena ematen baitie. Gainera, AAk benetako esperientzia erabiliz portaera konplexuak ikasteko aukera ematen du, programazioaren kostua nabarmen murriztuz. Objektuak manipulatzeko egungo sistema robotikoen mugak ikusita, lan honen helburu nagusia manipulazio-sistemen malgutasuna handitzea da AAn oinarritutako algoritmoak erabiliz, birprogramatu beharrik gabe ingurune dinamikoetara egokitzeko beharrezko gaitasunak emanez

A Workstation for microassembly

In this paper, an open-architecture, reconfigurable microassembly workstation for efficient and reliable assembly of micromachined parts is presented. The workstation is designed to be used as a research tool for investigation of the problems in microassembly. The development of such a workstation includes the design of: (i) a manipulation system consisting of motion stages providing necessary travel range and precision for the realization of assembly tasks, (ii) a vision system to visualize the microworld and the determination of the position and orientation of micro components to be assembled, (iii) a robust control system and necessary mounts for the end effectors in such a way that according to the task to be realized, the manipulation tools can be easily changed and the system will be ready for the predefined task. In addition tele-operated and semi-automated assembly concepts are implemented. The design is verified by implementing the range of the tasks in micro-parts manipulation. The versatility of the workstation is demonstrated and high accuracy of positioning is sho

How to organise return handling; an exploratory study with nine retailer warehouses

Already for a long time retailers take back products. In this paper we explore the factors contributing to the decision of combining vs. separating inbound and outbound flows during the return handling process. We do so through a comparative analysis of the operations in nine retailer warehouses, which can be divided in three groups: food retailers, department stores and mail order companies. We identify both aggravating factors and facilitating actions for return handling. Furthermore, we bring about recommendations for practice. At the end we put forward propositions that are useful in feeding studies on return handling efficiency. In particular, we conjecture over the impact that return volume and product diversity have on the decision for combining vs. separating the reverse and forward flows.Case studies;Retailing;Inbound and outbound flows;Product returns;Return handling

Achieving low cost and high quality aero structure assembly through integrated digital metrology systems

Measurement assisted assembly (MAA) has the potential to facilitate a step change in assembly efficiency for large structures such as airframes through the reduction of rework, manually intensive processes and expensive monolithic assembly tooling. It is shown how MAA can enable rapid part-to-part assembly, increased use of flexible automation, traceable quality assurance and control, reduced structure weight and improved aerodynamic tolerances. These advances will require the development of automated networks of measurement instruments; model based thermal compensation, the automatic integration of 'live' measurement data into variation simulation and algorithms to generate cutting paths for predictive shimming and drilling processes. This paper sets out an architecture for digital systems which will enable this integrated approach to variation management. © 2013 The Authors