9,227 research outputs found
Recommended from our members
Automatic synthesis of analog layout : a survey
A review of recent research in the automatic synthesis of physical geometry for analog integrated circuits is presented. On introduction, an explanation of the difficulties involved in analog layout as opposed to digital layout is covered. Review of the literature then follows. Emphasis is placed on the exposition of general methods for addressing problems specific to analog layout, with the details of specific systems only being given when they surve to illustrate these methods well. The conclusion discusses problems remaining and offers a prediction as to how technology will evolve to solve them. It is argued that although progress has been and will continue to be made in the automation of analog IC layout, due to fundamental differences in the nature of analog IC design as opposed to digital design, it should not be expected that the level of automation of the former will reach that of the latter any time soon
On the suitability and development of layout templates for analog layout reuse and layout-aware synthesis
Accelerating the synthesis of increasingly complex analog integrated circuits is key to bridge the widening gap between what we can integrate and what we can design while meeting ever-tightening time-to-market constraints. It is a well-known fact in the semiconductor industry that such goal can only be attained by means of adequate CAD methodologies, techniques, and accompanying tools. This is particularly important in analog physical synthesis (a.k.a. layout generation), where large sensitivities of the circuit performances to the many subtle details of layout implementation (device matching, loading and coupling effects, reliability, and area features are of utmost importance to analog designers), render complete automation a truly challenging task. To approach the problem, two directions have been traditionally considered, knowledge-based and optimization-based, both with their own pros and cons. Besides, recently reported solutions oriented to speed up the overall design flow by means of reuse-based practices or by cutting off time-consuming, error-prone spins between electrical and layout synthesis (a technique known as layout-aware synthesis), rely on a outstandingly rapid yet efficient layout generation method. This paper analyses the suitability of procedural layout generation based on templates (a knowledge-based approach) by examining the requirements that both layout reuse and layout-aware solutions impose, and how layout templates face them. The ability to capture the know-how of experienced layout designers and the turnaround times for layout instancing are considered main comparative aspects in relation to other layout generation approaches. A discussion on the benefit-cost trade-off of using layout templates is also included. In addition to this analysis, the paper delves deeper into systematic techniques to develop fully reusable layout templates for analog circuits, either for a change of the circuit sizing (i.e., layout retargeting) or a change of the fabrication process (i.e., layout migration). Several examples implemented with the Cadence's Virtuoso tool suite are provided as demonstration of the paper's contributions.Ministerio de Educación y Ciencia TEC2004-0175
Printed Circuit Board (PCB) design process and fabrication
This module describes main characteristics of Printed Circuit Boards (PCBs). A brief history of PCBs is introduced in the first chapter. Then, the design processes and the fabrication of PCBs are addressed and finally a study case is presented in the last chapter of the module.Peer ReviewedPostprint (published version
Tensor Computation: A New Framework for High-Dimensional Problems in EDA
Many critical EDA problems suffer from the curse of dimensionality, i.e. the
very fast-scaling computational burden produced by large number of parameters
and/or unknown variables. This phenomenon may be caused by multiple spatial or
temporal factors (e.g. 3-D field solvers discretizations and multi-rate circuit
simulation), nonlinearity of devices and circuits, large number of design or
optimization parameters (e.g. full-chip routing/placement and circuit sizing),
or extensive process variations (e.g. variability/reliability analysis and
design for manufacturability). The computational challenges generated by such
high dimensional problems are generally hard to handle efficiently with
traditional EDA core algorithms that are based on matrix and vector
computation. This paper presents "tensor computation" as an alternative general
framework for the development of efficient EDA algorithms and tools. A tensor
is a high-dimensional generalization of a matrix and a vector, and is a natural
choice for both storing and solving efficiently high-dimensional EDA problems.
This paper gives a basic tutorial on tensors, demonstrates some recent examples
of EDA applications (e.g., nonlinear circuit modeling and high-dimensional
uncertainty quantification), and suggests further open EDA problems where the
use of tensor computation could be of advantage.Comment: 14 figures. Accepted by IEEE Trans. CAD of Integrated Circuits and
System
Novel CMOS RFIC Layout Generation with Concurrent Device Placement and Fixed-Length Microstrip Routing
With advancing process technologies and booming IoT markets, millimeter-wave
CMOS RFICs have been widely developed in re- cent years. Since the performance
of CMOS RFICs is very sensi- tive to the precision of the layout, precise
placement of devices and precisely matched microstrip lengths to given values
have been a labor-intensive and time-consuming task, and thus become a major
bottleneck for time to market. This paper introduces a progressive
integer-linear-programming-based method to gener- ate high-quality RFIC layouts
satisfying very stringent routing requirements of microstrip lines, including
spacing/non-crossing rules, precise length, and bend number minimization,
within a given layout area. The resulting RFIC layouts excel in both per-
formance and area with much fewer bends compared with the simulation-tuning
based manual layout, while the layout gener- ation time is significantly
reduced from weeks to half an hour.Comment: ACM/IEEE Design Automation Conference (DAC), 201
Compressed Sensing Based Direct Conversion Receiver With Interference Reducing Sampling
This paper describes a direct conversion receiver applying compressed sensing
with the objective to relax the analog filtering requirements seen in the
traditional architecture. The analog filter is cumbersome in an \gls{IC} design
and relaxing its requirements is an advantage in terms of die area, performance
and robustness of the receiver. The objective is met by a selection of sampling
pattern matched to the prior knowledge of the frequency placement of the
desired and interfering signals. A simple numerical example demonstrates the
principle. The work is part of an ongoing research effort and the different
project phases are explained.Comment: 3 pages, 5 figures, submitted to IEEE International Conference On
Sensing Communication and Networking 2014 (poster
Programmable rate modem utilizing digital signal processing techniques
The engineering development study to follow was written to address the need for a Programmable Rate Digital Satellite Modem capable of supporting both burst and continuous transmission modes with either binary phase shift keying (BPSK) or quadrature phase shift keying (QPSK) modulation. The preferred implementation technique is an all digital one which utilizes as much digital signal processing (DSP) as possible. Here design tradeoffs in each portion of the modulator and demodulator subsystem are outlined, and viable circuit approaches which are easily repeatable, have low implementation losses and have low production costs are identified. The research involved for this study was divided into nine technical papers, each addressing a significant region of concern in a variable rate modem design. Trivial portions and basic support logic designs surrounding the nine major modem blocks were omitted. In brief, the nine topic areas were: (1) Transmit Data Filtering; (2) Transmit Clock Generation; (3) Carrier Synthesizer; (4) Receive AGC; (5) Receive Data Filtering; (6) RF Oscillator Phase Noise; (7) Receive Carrier Selectivity; (8) Carrier Recovery; and (9) Timing Recovery
A VHDL-AMS Simulation Environment for an UWB Impulse Radio Transceiver
Ultra-Wide-Band (UWB) communication based on the impulse radio paradigm is becoming increasingly popular. According to the IEEE 802.15 WPAN Low Rate Alternative PHY Task Group 4a, UWB will play a major role in localization applications, due to the high time resolution of UWB signals which allow accurate indirect measurements of distance between transceivers. Key for the successful implementation of UWB transceivers is the level of integration that will be reached, for which a simulation environment that helps take appropriate design decisions is crucial. Owing to this motivation, in this paper we propose a multiresolution UWB simulation environment based on the VHDL-AMS hardware description language, along with a proper methodology which helps tackle the complexity of designing a mixed-signal UWB System-on-Chip. We applied the methodology and used the simulation environment for the specification and design of an UWB transceiver based on the energy detection principle. As a by-product, simulation results show the effectiveness of UWB in the so-called ranging application, that is the accurate evaluation of the distance between a couple of transceivers using the two-way-ranging metho
- …