On the use of smartphones as novel photogrammetric water gauging instruments: Developing tools for crowdsourcing water levels

The term global climate change is omnipresent since the beginning of the last decade. Changes in the global climate are associated with an increase in heavy rainfalls that can cause nearly unpredictable flash floods. Consequently, spatio-temporally high-resolution monitoring of rivers becomes increasingly important. Water gauging stations continuously and precisely measure water levels. However, they are rather expensive in purchase and maintenance and are preferably installed at water bodies relevant for water management. Small-scale catchments remain often ungauged. In order to increase the data density of hydrometric monitoring networks and thus to improve the prediction quality of flood events, new, flexible and cost-effective water level measurement technologies are required. They should be oriented towards the accuracy requirements of conventional measurement systems and facilitate the observation of water levels at virtually any time, even at the smallest rivers. A possible solution is the development of a photogrammetric smartphone application (app) for crowdsourcing water levels, which merely requires voluntary users to take pictures of a river section to determine the water level. Today’s smartphones integrate high-resolution cameras, a variety of sensors, powerful processors, and mass storage. However, they are designed for the mass market and use low-cost hardware that cannot comply with the quality of geodetic measurement technology. In order to investigate the potential for mobile measurement applications, research was conducted on the smartphone as a photogrammetric measurement instrument as part of the doctoral project. The studies deal with the geometric stability of smartphone cameras regarding device-internal temperature changes and with the accuracy potential of rotation parameters measured with smartphone sensors. The results show a high, temperature-related variability of the interior orientation parameters, which is why the calibration of the camera should be carried out during the immediate measurement. The results of the sensor investigations show considerable inaccuracies when measuring rotation parameters, especially the compass angle (errors up to 90° were observed). The same applies to position parameters measured by global navigation satellite system (GNSS) receivers built into smartphones. According to the literature, positional accuracies of about 5 m are possible in best conditions. Otherwise, errors of several 10 m are to be expected. As a result, direct georeferencing of image measurements using current smartphone technology should be discouraged. In consideration of the results, the water gauging app Open Water Levels (OWL) was developed, whose methodological development and implementation constituted the core of the thesis project. OWL enables the flexible measurement of water levels via crowdsourcing without requiring additional equipment or being limited to specific river sections. Data acquisition and processing take place directly in the field, so that the water level information is immediately available. In practice, the user captures a short time-lapse sequence of a river bank with OWL, which is used to calculate a spatio-temporal texture that enables the detection of the water line. In order to translate the image measurement into 3D object space, a synthetic, photo-realistic image of the situation is created from existing 3D data of the river section to be investigated. Necessary approximations of the image orientation parameters are measured by smartphone sensors and GNSS. The assignment of camera image and synthetic image allows for the determination of the interior and exterior orientation parameters by means of space resection and finally the transfer of the image-measured 2D water line into the 3D object space to derive the prevalent water level in the reference system of the 3D data. In comparison with conventionally measured water levels, OWL reveals an accuracy potential of 2 cm on average, provided that synthetic image and camera image exhibit consistent image contents and that the water line can be reliably detected. In the present dissertation, related geometric and radiometric problems are comprehensively discussed. Furthermore, possible solutions, based on advancing developments in smartphone technology and image processing as well as the increasing availability of 3D reference data, are presented in the synthesis of the work. The app Open Water Levels, which is currently available as a beta version and has been tested on selected devices, provides a basis, which, with continuous further development, aims to achieve a final release for crowdsourcing water levels towards the establishment of new and the expansion of existing monitoring networks.Der Begriff des globalen Klimawandels ist seit Beginn des letzten Jahrzehnts allgegenwärtig. Die Veränderung des Weltklimas ist mit einer Zunahme von Starkregenereignissen verbunden, die nahezu unvorhersehbare Sturzfluten verursachen können. Folglich gewinnt die raumzeitlich hochaufgelöste Überwachung von Fließgewässern zunehmend an Bedeutung. Pegelmessstationen erfassen kontinuierlich und präzise Wasserstände, sind jedoch in Anschaffung und Wartung sehr teuer und werden vorzugsweise an wasserwirtschaftlich-relevanten Gewässern installiert. Kleinere Gewässer bleiben häufig unbeobachtet. Um die Datendichte hydrometrischer Messnetze zu erhöhen und somit die Vorhersagequalität von Hochwasserereignissen zu verbessern, sind neue, kostengünstige und flexibel einsetzbare Wasserstandsmesstechnologien erforderlich. Diese sollten sich an den Genauigkeitsanforderungen konventioneller Messsysteme orientieren und die Beobachtung von Wasserständen zu praktisch jedem Zeitpunkt, selbst an den kleinsten Flüssen, ermöglichen. Ein Lösungsvorschlag ist die Entwicklung einer photogrammetrischen Smartphone-Anwendung (App) zum Crowdsourcing von Wasserständen mit welcher freiwillige Nutzer lediglich Bilder eines Flussabschnitts aufnehmen müssen, um daraus den Wasserstand zu bestimmen. Heutige Smartphones integrieren hochauflösende Kameras, eine Vielzahl von Sensoren, leistungsfähige Prozessoren und Massenspeicher. Sie sind jedoch für den Massenmarkt konzipiert und verwenden kostengünstige Hardware, die nicht der Qualität geodätischer Messtechnik entsprechen kann. Um das Einsatzpotential in mobilen Messanwendungen zu eruieren, sind Untersuchungen zum Smartphone als photogrammetrisches Messinstrument im Rahmen des Promotionsprojekts durchgeführt worden. Die Studien befassen sich mit der geometrischen Stabilität von Smartphone-Kameras bezüglich geräteinterner Temperaturänderungen und mit dem Genauigkeitspotential von mit Smartphone-Sensoren gemessenen Rotationsparametern. Die Ergebnisse zeigen eine starke, temperaturbedingte Variabilität der inneren Orientierungsparameter, weshalb die Kalibrierung der Kamera zum unmittelbaren Messzeitpunkt erfolgen sollte. Die Ergebnisse der Sensoruntersuchungen zeigen große Ungenauigkeiten bei der Messung der Rotationsparameter, insbesondere des Kompasswinkels (Fehler von bis zu 90° festgestellt). Selbiges gilt auch für Positionsparameter, gemessen durch in Smartphones eingebaute Empfänger für Signale globaler Navigationssatellitensysteme (GNSS). Wie aus der Literatur zu entnehmen ist, lassen sich unter besten Bedingungen Lagegenauigkeiten von etwa 5 m erreichen. Abseits davon sind Fehler von mehreren 10 m zu erwarten. Infolgedessen ist von einer direkten Georeferenzierung von Bildmessungen mittels aktueller Smartphone-Technologie abzusehen. Unter Berücksichtigung der gewonnenen Erkenntnisse wurde die Pegel-App Open Water Levels (OWL) entwickelt, deren methodische Entwicklung und Implementierung den Kern der Arbeit bildete. OWL ermöglicht die flexible Messung von Wasserständen via Crowdsourcing, ohne dabei zusätzliche Ausrüstung zu verlangen oder auf spezifische Flussabschnitte beschränkt zu sein. Datenaufnahme und Verarbeitung erfolgen direkt im Feld, so dass die Pegelinformationen sofort verfügbar sind. Praktisch nimmt der Anwender mit OWL eine kurze Zeitraffersequenz eines Flussufers auf, die zur Berechnung einer Raum-Zeit-Textur dient und die Erkennung der Wasserlinie ermöglicht. Zur Übersetzung der Bildmessung in den 3D-Objektraum wird aus vorhandenen 3D-Daten des zu untersuchenden Flussabschnittes ein synthetisches, photorealistisches Abbild der Aufnahmesituation erstellt. Erforderliche Näherungen der Bildorientierungsparameter werden von Smartphone-Sensoren und GNSS gemessen. Die Zuordnung von Kamerabild und synthetischem Bild erlaubt die Bestimmung der inneren und äußeren Orientierungsparameter mittels räumlichen Rückwärtsschnitt. Nach Rekonstruktion der Aufnahmesituation lässt sich die im Bild gemessene 2D-Wasserlinie in den 3D-Objektraum projizieren und der vorherrschende Wasserstand im Referenzsystem der 3D-Daten ableiten. Im Soll-Ist-Vergleich mit konventionell gemessenen Pegeldaten zeigt OWL ein erreichbares Genauigkeitspotential von durchschnittlich 2 cm, insofern synthetisches und reales Kamerabild einen möglichst konsistenten Bildinhalt aufweisen und die Wasserlinie zuverlässig detektiert werden kann. In der vorliegenden Dissertation werden damit verbundene geometrische und radiometrische Probleme ausführlich diskutiert sowie Lösungsansätze, auf der Basis fortschreitender Entwicklungen von Smartphone-Technologie und Bildverarbeitung sowie der zunehmenden Verfügbarkeit von 3D-Referenzdaten, in der Synthese der Arbeit vorgestellt. Mit der gegenwärtig als Betaversion vorliegenden und auf ausgewählten Geräten getesteten App Open Water Levels wurde eine Basis geschaffen, die mit kontinuierlicher Weiterentwicklung eine finale Freigabe für das Crowdsourcing von Wasserständen und damit den Aufbau neuer und die Erweiterung bestehender Monitoring-Netzwerke anstrebt

Communication-theoretic Approach for Skin Cancer Detection using Dynamic Thermal Imaging

Skin cancer is the most common cancer in the United States with over 3.5M annual cases. Statistics from the Americans Cancer Society indicate that 20% of the American population will develop this disease during their lifetime. Presently, visual inspection by a dermatologist has good sensitivity (\u3e90%) but poor specificity (\u3c10%), especially for melanoma conditions, which is the most dangerous type of skin cancer with a five-year survival rate between 16-62%. Over the past few decades, several studies have evaluated the use of infrared imaging to diagnose skin cancer. Here we use dynamic thermal imaging (DTI) to demonstrate a rapid, accurate and non-invasive imaging and processing technique to diagnose melanoma and non-melanoma skin cancer lesions. In DTI, the suspicious lesion is cooled down and the thermal recovery of the skin is monitored with an infrared camera. The proposed algorithm exploits the intrinsic order present in the time evolution of the thermal recoveries of the skin of human subjects to diagnose the malignancy and it achieves outstanding performance for discriminating between benign and malignant skin lesions. In this dissertation we propose a stochastic parametric representation of the thermal recovery curve, which is extracted from a heat equation. The statistics of the random parameters associated with the proposed stochastic model are estimated from measured thermal recovery curves of subjects with known condition. The stochastic model is, in turn, utilized to derive an analytical autocorrelation function (ACF) of the stochastic recovery curves. The analytical ACF is utilized in the context of continuous-time detection theory in order to define an optimal statistical decision rule such that the sensitivity of the algorithm is guaranteed to be at a maximum for every prescribed false-alarm probability. The proposed algorithm was tested in a pilot study including 140 human subjects and we have demonstrated sensitivity in excess of 99% for a prescribed false-alarm probability of 1% (specificity in excess of 99%) for detection of skin cancer. To the best of our knowledge, this is the highest reported accuracy for any non-invasive skin cancer diagnosis method. The proposed algorithm is studied in details for different patient permutations demonstrating robustness in maximizing the probability of detecting those subjects with malignant condition. Moreover, the proposed method is further generalized to include thermal recovery curves of the tissue that surrounds the suspicious lesion as a local reference. Such a local reference permits the compensation of any possible anomalous behavior in the lesion thermal recovery, which, in turn, improves both the theoretical and empirical performance of the method. As a final contribution, we develop a novel edge-detection algorithm--specifically targeted for multispectral (MS) and hyperspectral (HS) imagery--which performs l edge detection based solely on spectral (color) information. More precisely, this algorithm fuses the process of detecting edges through ratios of pixels with critical information resulting from spectral classification of the very image whose edges are to be identified. This algorithm is tested in multicolor (spectral) imagery achieving superior results as compared with other alternatives. The edge-detection algorithm is subsequently utilized in the skin-cancer detection context to define the lesion boundary from a visible color image by exploiting the color contrast between the pigmented tissue and the surrounding skin. With this automated lesion selection, we develop a method to extract spatial features equivalent to those utilized by the dermatologists in diagnosing malignant conditions. These spatial features are fused with the temporal features, obtained from the thermal-recovery method, to yield a spatio-temporal method for skin-cancer detection. While providing a rigorous mathematical foundation for the viability of the dynamic thermal recovery approach for skin-cancer detection, the research completed in this dissertation also provides the first reliable, accurate and non-invasive diagnosis method for preliminary skin-cancer detection. This dissertation, therefore, paves the way for future clinical studies to produce new skin-cancer diagnosis practices that minimize the need for unnecessary biopsies without sacrificing reliability

Advanced Image Acquisition, Processing Techniques and Applications

"Advanced Image Acquisition, Processing Techniques and Applications" is the first book of a series that provides image processing principles and practical software implementation on a broad range of applications. The book integrates material from leading researchers on Applied Digital Image Acquisition and Processing. An important feature of the book is its emphasis on software tools and scientific computing in order to enhance results and arrive at problem solution

The Development of a Performance Assessment Methodology for Activity Based Intelligence: A Study of Spatial, Temporal, and Multimodal Considerations

Activity Based Intelligence (ABI) is the derivation of information from a series of in- dividual actions, interactions, and transactions being recorded over a period of time. This usually occurs in Motion imagery and/or Full Motion Video. Due to the growth of unmanned aerial systems technology and the preponderance of mobile video devices, more interest has developed in analyzing people\u27s actions and interactions in these video streams. Currently only visually subjective quality metrics exist for determining the utility of these data in detecting specific activities. One common misconception is that ABI boils down to a simple resolution problem; more pixels and higher frame rates are better. Increasing resolution simply provides more data, not necessary more informa- tion. As part of this research, an experiment was designed and performed to address this assumption. Nine sensors consisting of four modalities were place on top of the Chester F. Carlson Center for Imaging Science in order to record a group of participants executing a scripted set of activities. The multimodal characteristics include data from the visible, long-wave infrared, multispectral, and polarimetric regimes. The activities the participants were scripted to cover a wide range of spatial and temporal interactions (i.e. walking, jogging, and a group sporting event). As with any large data acquisition, only a subset of this data was analyzed for this research. Specifically, a walking object exchange scenario and simulated RPG. In order to analyze this data, several steps of preparation occurred. The data were spatially and temporally registered; the individual modalities were fused; a tracking algorithm was implemented, and an activity detection algorithm was applied. To develop a performance assessment for these activities a series of spatial and temporal degradations were performed. Upon completion of this work, the ground truth ABI dataset will be released to the community for further analysis

Visual analysis and synthesis with physically grounded constraints

The past decade has witnessed remarkable progress in image-based, data-driven vision and graphics. However, existing approaches often treat the images as pure 2D signals and not as a 2D projection of the physical 3D world. As a result, a lot of training examples are required to cover sufficiently diverse appearances and inevitably suffer from limited generalization capability. In this thesis, I propose "inference-by-composition" approaches to overcome these limitations by modeling and interpreting visual signals in terms of physical surface, object, and scene. I show how we can incorporate physically grounded constraints such as scene-specific geometry in a non-parametric optimization framework for (1) revealing the missing parts of an image due to removal of a foreground or background element, (2) recovering high spatial frequency details that are not resolvable in low-resolution observations. I then extend the framework from 2D images to handle spatio-temporal visual data (videos). I demonstrate that we can convincingly fill spatio-temporal holes in a temporally coherent fashion by jointly reconstructing the appearance and motion. Compared to existing approaches, our technique can synthesize physically plausible contents even in challenging videos. For visual analysis, I apply stereo camera constraints for discovering multiple approximately linear structures in extremely noisy videos with an ecological application to bird migration monitoring at night. The resulting algorithms are simple and intuitive while achieving state-of-the-art performance without the need of training on an exhaustive set of visual examples