Medical microprocessor systems

The practical classes and laboratory work in the discipline "Medical microprocessor systems", performed using software in the programming environment of microprocessors Texas Instruments (Code Composer Studio) and using of digital microprocessors of the Texas Instruments DSK6400 family, and models of electrical equipment in the environment of graphical programming LabVIEW 2010.Лабораторний практикум з програмування та побудови медичних мікропроцесорних систем, який викладено у навчальному посібнику допомагає накопичувати й ефективно використовувати отриману інформацію з теоретичного курсу на всіх стадіях навчального процесу, що є важливим для підготовки магістрів та необхідною ланкою у науковому пізнанні практичних основ біомедичної електроніки.The laboratory workshop on the programming and construction of medical microprocessor systems, which is outlined in the tutorial, helps to accumulate and effectively use the information obtained from a theoretical course at all stages of the educational process, which is important for the preparation of masters and a necessary link in the scientific knowledge of the practical basics of biomedicine.Лабораторный практикум по программированию и построению медицинских микропроцессорных систем, который изложен в учебном пособии помогает накапливать и эффективно использовать полученную информацию из теоретического курса на всех стадиях учебного процесса, что важно для подготовки магистров и является необходимым звеном в научном познании практических основ биомедицинской электроники

Concurrent Backscatter Streaming from Batteryless and Wireless Sensor Tags with Multiple Subcarrier Multiple Access

This paper proposes a novel multiple access method that enables concurrent sensor data streaming from multiple batteryless, wireless sensor tags. The access method is a pseudo-FDMA scheme based on the subcarrier backscatter communication principle, which is widely employed in passive RFID and radar systems. Concurrency is realized by assigning a dedicated subcarrier to each sensor tag and letting all sensor tags backscatter simultaneously. Because of the nature of the subcarrier, which is produced by constant rate switching of antenna impedance without any channel filter in the sensor tag, the tag-to-reader link always exhibits harmonics. Thus, it is important to reject harmonics when concurrent data streaming is required. This paper proposes a harmonics rejecting receiver to allow simultaneous multiple subcarrier usage. This paper particularly focuses on analog sensor data streaming which minimizes the functional requirements on the sensor tag and frequency bandwidth. The harmonics rejection receiver is realized by carefully handling group delay and phase delay of the subcarrier envelope and the carrier signal to accurately produce replica of the harmonics by introducing Hilbert and inverse Hilbert transformations. A numerical simulator with Simulink and a hardware implementation with USRP and LabVIEW have been developed. Simulations and experiments reveal that even if the CIR before harmonics rejection is 0dB, the proposed receiver recovers the original sensor data with over 0.98 cross-correlation

Investigation of Lower-limb Tissue Perfusion during Loading

An extant tissue indentor used for amputee residual limb tissue indentation studies was modified to include laser Doppler flowmetry (LDF) to enable measurement of tissue perfusion during indentation. This device allows quantitative assessment of the mechanical and physiological response of soft tissues to load, as demonstrated by indentation studies of the lower-limb tissues of young healthy subjects. Potential measures of interest include the relative change in tissue perfusion with load and the time delays associated with the perfusion response during tissue loading and unloading. Such measures may prove useful in future studies of residual limb tissues, improving our understanding of tissue viability risk factors for individuals with lower-limb amputation

Seismic and vibration signal analysis and monitoring using LabView

Every year there are around 20 earthquakes of magnitude 7 or above . This kind of seismic events are potentially destructive and can cause several structural damage, economic and human loss. In order to perform an efficient risk management and prevention work geophysics must be equipped with suitable software and hardware tools. Seismic studies comprise not only risk management but earth structure studies that are useful in gas and oil prospections. Vibration monitoring has also turned in a very useful scientific approach to deal with structural safety and maintenance. Among these devices, MEMS accelerometer combines great performance with low costs, characteristics that have made it one of the most popular devices when it comes to this task. Seismic analysis software has been developed using LabVIEW. The software decodes SAC data files and retrieves important seismic parameters like arrival wave times, location and magnitude. The precision and performance reached is acceptable for the scope of this project and it could be used as a domestic seismic analyser but not for its use in a professional seismic station. The seismic data for the system evaluation was retrieved from IRIS database. A vibration DAQ and monitoring module has been designed and implemented. It successfully measures and monitors acceleration versus time and the signal’s spectra. Zooming options were included in order to make easier the background noise and ambient vibration study. An instant and maximum earthquake intensity gauge was programmed to give an idea of the experienced event potential danger. The user can selectively save acceleration time responses in LVM format. An analogue output was implemented. It is capable of reading acceleration versus time responses saved in LVM and SAC files and output them using a DAQ card analogue output function. This voltage can be seen in an oscilloscope or input to other devices. In order to acquire and save the analogue waveforms created with the previous function an analogue input was included as an initial objective in the Scheme of Work. However, it was dropped in the final implementation because it was considered that its function was too similar to the vibration DAQ module and it did not have enough practical application

Advanced techniques for diagnostics and control applied to particle accelerators

201 p.Esta tesis versa en torno a tecnologías y técnicas novedosas orientadas al diagnóstico y control para aceleradores de partículas. Se centra principalmente en el desarrollo de dos aplicaciones para dicho propósito; un monitor de posición de haz (beam position monitor o BPM en inglés) por un lado, y un control de RF denominado sistema de RF de bajo nivel (low-level RF o LLRF en inglés) por el otro. Además, se han desarrollado completos bancos de pruebas, permitiendo de esta manera el testeo de las mencionadas soluciones en el laboratorio. El estudio de técnicas de muestreo y procesamiento digital para su posterior implementación también juega un papel importante en este trabajo.De esta manera, las principales contribuciones de esta tesis son el desarrollo de un BPM y un sistema de control LLRF altamente flexibles y reconfigurables, estando ambos basados en hardware digital. Las soluciones presentadas han sido diseñadas con el objetivo de crear herramientas especialmente adecuadas para labores de investigación en laboratorio. Las aplicaciones obtenidas cumplen este objetivo, mostrando características especialmente valiosas como una rápida etapa de prototipado y alta modularidad.Otra línea de la presente tesis está dirigida al estudio de técnicas avanzadas de muestreo y procesamiento digital de señal, las cuales son posteriormente implementadas en las citadas aplicaciones. Finalmente, la última parte de este trabajo trata sobre la integración de la información producida por estas herramientas de diagnóstico y control en EPICS, un sistema de control ampliamente utilizado en el campo de los aceleradores de partículas

Development of an electronic control unit for the T63 gas turbine

Includes bibliographical references.Fundamental research has been undertaken at the SASOL Advanced Fuels Laboratory to investigate the effects of the chemistry and physical properties of both conventional and synthetic jet fuels on threshold combustion. This research was undertaken using a purpose built low pressure continuous combustion test facility. Researchers at the laboratory now wish to examine these effects on an aviation gas turbine in service for which “off-map” scheduling of fuel to the engine would be required. A two phase project was thus proposed to develop this capability; the work of this thesis embodies Phase I of that project

Operational modal analysis and continuous dynamic monitoring of footbridges

Tese de doutoramento. Engenharia Civil. Universidade do Porto. Faculdade de Engenharia. 201

FLEXIBLE LOW-COST HW/SW ARCHITECTURES FOR TEST, CALIBRATION AND CONDITIONING OF MEMS SENSOR SYSTEMS

During the last years smart sensors based on Micro-Electro-Mechanical systems (MEMS) are widely spreading over various fields as automotive, biomedical, optical and consumer, and nowadays they represent the outstanding state of the art. The reasons of their diffusion is related to the capability to measure physical and chemical information using miniaturized components. The developing of this kind of architectures, due to the heterogeneities of their components, requires a very complex design flow, due to the utilization of both mechanical parts typical of the MEMS sensor and electronic components for the interfacing and the conditioning. In these kind of systems testing activities gain a considerable importance, and they concern various phases of the life-cycle of a MEMS based system. Indeed, since the design phase of the sensor, the validation of the design by the extraction of characteristic parameters is important, because they are necessary to design the sensor interface circuit. Moreover, this kind of architecture requires techniques for the calibration and the evaluation of the whole system in addition to the traditional methods for the testing of the control circuitry. The first part of this research work addresses the testing optimization by the developing of different hardware/software architecture for the different testing stages of the developing flow of a MEMS based system. A flexible and low-cost platform for the characterization and the prototyping of MEMS sensors has been developed in order to provide an environment that allows also to support the design of the sensor interface. To reduce the reengineering time requested during the verification testing a universal client-server architecture has been designed to provide a unique framework to test different kind of devices, using different development environment and programming languages. Because the use of ATE during the engineering phase of the calibration algorithm is expensive in terms of ATE’s occupation time, since it requires the interruption of the production process, a flexible and easily adaptable low-cost hardware/software architecture for the calibration and the evaluation of the performance has been developed in order to allow the developing of the calibration algorithm in a user-friendly environment that permits also to realize a small and medium volume production. The second part of the research work deals with a topic that is becoming ever more important in the field of applications for MEMS sensors, and concerns the capability to combine information extracted from different typologies of sensors (typically accelerometers, gyroscopes and magnetometers) to obtain more complex information. In this context two different algorithm for the sensor fusion has been analyzed and developed: the first one is a fully software algorithm that has been used as a means to estimate how much the errors in MEMS sensor data affect the estimation of the parameter computed using a sensor fusion algorithm; the second one, instead, is a sensor fusion algorithm based on a simplified Kalman filter. Starting from this algorithm, a bit-true model in Mathworks Simulink(TM) has been created as a system study for the implementation of the algorithm on chip

Automatic transmission parameters measurement and radiation pattern simulation for an RF photonic integrated beamformer

We present the implementation and demonstration of a software tool for the performance characterization of integrated N-by-1 photonic beamformers for phased array antennas. The software operates the automatic measurement of the transmission parameters of an equivalent N+1 ports microwave network, corresponding to the complex excitations of the individual antenna elements of the array. The measured excitations are used to simulate the array factor generated by the optical beamformer and to analyze it in terms of maximum directivity, sidelobe levels and wideband behaviour. The software provides a useful tool to test the wideband performance of the network, the effects of excitation inaccuracies, and a straightforward evaluation of the effects of amplitude and phase weighting for beam shaping