15,525 research outputs found
Implementing Rapid Prototyping Using CNC Machining (CNC-RP) Through a CAD/CAM Interface
This paper presents the methodology and implementation of a rapid machining system using a
CAD/CAM interface. Rapid Prototyping using CNC Machining (CNC-RP) is a method that has
been developed which enables automatic generation of process plans for a machined component.
The challenge with CNC-RP is not the technical problems of material removal, but with all of
the required setup, fixture and toolpath planning, which has previously required a skilled
machinist. Through the use of advanced geometric algorithms, we have implemented an
interface with a CAD/CAM system that allows true automatic NC code generation directly from
a CAD model with no human interaction; a capability necessary for a practical rapid prototyping
system.Mechanical Engineerin
From 3D Models to 3D Prints: an Overview of the Processing Pipeline
Due to the wide diffusion of 3D printing technologies, geometric algorithms
for Additive Manufacturing are being invented at an impressive speed. Each
single step, in particular along the Process Planning pipeline, can now count
on dozens of methods that prepare the 3D model for fabrication, while analysing
and optimizing geometry and machine instructions for various objectives. This
report provides a classification of this huge state of the art, and elicits the
relation between each single algorithm and a list of desirable objectives
during Process Planning. The objectives themselves are listed and discussed,
along with possible needs for tradeoffs. Additive Manufacturing technologies
are broadly categorized to explicitly relate classes of devices and supported
features. Finally, this report offers an analysis of the state of the art while
discussing open and challenging problems from both an academic and an
industrial perspective.Comment: European Union (EU); Horizon 2020; H2020-FoF-2015; RIA - Research and
Innovation action; Grant agreement N. 68044
Optimization of roughing operations in cnc machining for rapid manufacturing processes
This paper presents a method for optimizing roughing operations in CNC machining particularly for parts production through a subtractive rapid manufacturing process. The roughing operation in machining is primarily used to remove the bulk of the material and to approximately shape the workpiece towards the finish form. The manufacturing process described utilizes a 3-axis CNC machine with an indexable 4th axis device that is used to hold and rotate the workpiece. The method used is derived from the multiple approaches in roughing operations that differ in the number and the angle of the orientations. Most of the machining parameters are generalized throughout the process to allow some automation in generating the machining program. Overall, the performance of each of the approaches is evaluated based on the lowest machining time to produce the part
Approaches for an energy and resource efficient manufacturing in the aircraft industry
Over the recent years, several studies have pointed out the impact of manufacturing on the environment. Especially machining offers great potential for the conservation of energy, resources and the reuse of raw materials. This article gives an overview on the approaches that are currently under investigation at the Institute of Production Engineering and Machine Tools with the aim of improving these aspects. The approaches cover regrinding methods for worn tools, recycling of titanium chips and process planning for hybrid process chains. In the first part of the article, a novel process chain for the automatic regrinding of cemented carbide tools is presented. It is shown that production costs can be reduced significantly, as well as the required energy for production of carbide tools. In the second part of the article, approaches for the recycling of titanium chips from machining processes are described. The last part focuses on the resource and energy efficiency of process chains that contain additive and subtractive processes
Latest Developments in Industrial Hybrid Machine Tools that Combine Additive and Subtractive Operations
Hybrid machine tools combining additive and subtractive processes have arisen as a solution to increasing manufacture requirements, boosting the potentials of both technologies, while compensating and minimizing their limitations. Nevertheless, the idea of hybrid machines is relatively new and there is a notable lack of knowledge about the implications arisen from their in-practice use. Therefore, the main goal of the present paper is to fill the existing gap, giving an insight into the current advancements and pending tasks of hybrid machines both from an academic and industrial perspective. To that end, the technical-economical potentials and challenges emerging from their use are identified and critically discussed. In addition, the current situation and future perspectives of hybrid machines from the point of view of process planning, monitoring, and inspection are analyzed. On the one hand, it is found that hybrid machines enable a more efficient use of the resources available, as well as the production of previously unattainable complex parts. On the other hand, it is concluded that there are still some technological challenges derived from the interaction of additive and subtractive processes to be overcome (e.g., process planning, decision planning, use of cutting fluids, and need for a post-processing) before a full implantation of hybrid machines is fulfilledSpecial thanks are addressed to the Industry and Competitiveness Spanish Ministry for the support on the DPI2016-79889-R INTEGRADDI project and to the PARADDISE project H2020-IND-CE-2016-17/H2020-FOF-2016 of the European Union's Horizon 2020 research and innovation program
Additive manufacturing for neurosurgery: Digital light processing of individualized patient-specific cerebral aneurysms
This study aims at demonstrating the feasibility of reproducing individualized patient-specific three-dimensional models of cerebral aneurysms by using the direct light processing (DLP) 3D printing technique in a low-time and inexpensive way. Such models were used to help neurosurgeons understand the anatomy of the aneurysms together with the surrounding vessels and their relationships, providing, therefore, a tangible supporting tool with which to train and plan surgical operations. The starting 3D models were obtained by processing the computed tomography angiographies and the digital subtraction angiographies of three patients. Then, a 3D DLP printer was used to print the models, and, if acceptable, on the basis of the neurosurgeon's opinion, they were used for the planning of the neurosurgery operation and patient information. All the models were printed within three hours, providing a comprehensive representation of the cerebral aneurysms and the surrounding structures and improving the understanding of their anatomy and simplifying the planning of the surgical operation
A Product Life Cycle Ontology for Additive Manufacturing
The manufacturing industry is evolving rapidly, becoming more complex, more interconnected, and more geographically distributed. Competitive pressure and diversity of consumer demand are driving manufacturing companies to rely more and more on improved knowledge management practices. As a result, multiple software systems are being created to support the integration of data across the product life cycle. Unfortunately, these systems manifest a low degree of interoperability, and this creates problems, for instance when different enterprises or different branches of an enterprise interact. Common ontologies (consensus-based controlled vocabularies) have proved themselves in various domains as a valuable tool for solving such problems. In this paper, we present a consensus-based Additive Manufacturing Ontology (AMO) and illustrate its application in promoting re-usability in the field of dentistry product manufacturing
Industrialization of hybrid and additive manufacturing - Implementation to Finnish industry (HYBRAM)
Virtual assembly rapid prototyping of near net shapes
Virtual reality (VR) provides another dimension to many engineering applications. Its immersive and interactive nature allows an intuitive approach to study both cognitive activities and performance evaluation. Market competitiveness means having products meet form, fit and function quickly. Rapid Prototyping and Manufacturing (RP&M) technologies are increasingly being applied to produce functional prototypes and the direct manufacturing of small components. Despite its flexibility, these systems have common drawbacks such as slow build rates, a limited number of build axes (typically one) and the need for post processing. This paper presents a Virtual Assembly Rapid Prototyping (VARP) project which involves evaluating cognitive activities in assembly tasks based on the adoption of immersive virtual reality along with a novel non-layered rapid prototyping for near net shape (NNS) manufacturing of components. It is envisaged that this integrated project will facilitate a better understanding of design for manufacture and assembly by utilising equivalent scale digital and physical prototyping in one rapid prototyping system. The state of the art of the VARP project is also presented in this paper
- …