Intelligent Thermal Condition Monitoring Of Electrical Equipment Using Infrared Thermography

Infrared thermographic inspection system is widely being utilized for defect detection in electrical equipment. Conventional inspection based on the temperature data interpretation and evaluation the condition of the equipment is subjective and depends on the human experts. Implementation of an automatic diagnostic system based on artificial neural network reduces operating time, human efforts and also increases the reliability of system. In this thesis, an automatic features extraction system from thermal image of defects and the intelligent classification of thermal condition based on neural network are proposed. The proposed system extracts first order histogram based features and grey level co-occurrence matrix features from the segmented regions and evaluates the effectiveness of these features for defect characterization. Three feature selection techniques namely principal component analysis, the discriminant analysis and individual feature performance analysis are employed to find out the useful and important statistical features. In this study, multilayered perceptron network is proposed for classifying thermal condition into two classes namely normal and defective. The multilayered perceptron neural networks are trained using various training algorithms. Additionally, the present research introduces a computer aided defect diagnosis system where the defected region is found by manual thresholding and intensity features are extracted from each segmented region. The results prove that the statistical features are capable to classify thermal condition and the neural networks achieve the accuracy around 73~78

Thermal Imaging for Enhancing Inspection Reliability: Detection and Characterization

Reliable performance of an equipment or structure depends on pre-service quality and in- service degradation of the equipment or structure under operating conditions. The role of non-destructive testing (NDT) is to ensure integrity, and in turn, reliability of equipment or structure. Besides, NDT can also monitor in-service degradation and to avoid premature failure of the equipments/structures and prevent accidents as well as save human life. Up to now, NDT has been used in various fields of applications such as the inspection o

Evaluating the Thermal Condition of Electrical Equipment Via IRT Image Analysis

The integrity of electrical power equipment is of paramount importance when itsupplies electricity throughout a facility. However, the reliability of the equipments will degraded after sometime, and appropriate maintenance has to be taken accordingly to avoid future faults. Infrared thermography (IRT) image analysis is a commonly used technique for diagnosing the reliability of electrical equipments. Conventionally, the analysis of infrared image is done manually and takes very long time for further analysis. This paper proposes an automatic thermal fault detection and classification system for evaluating thecondition of electrical equipment by analyzing its infrared image. First, the image is segmented to find the target region of interest (ROI). The detected regions which have the same region properties are grouped together in order to remove the unwanted regions. Finally, statistical features from each detected region are extracted and classified using the support vector machine (SVM) algorithm. The thermal condition of electrical equipments is evaluated based on qualitative measurement technique. The experimental result shows that the proposed system can detect and classify the thermal condition of electrical equipments

Application of infrared thermography to failure detection in industrial induction motors: case stories

(c) 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works[EN] Infrared thermography has been extensively applied over decades to areas such as maintenance of electrical installations. Its use in electrical machinery has been mainly circumscribed to the detection of faults in static machines, such as power transformers. However, with regard to the predictive maintenance of rotating electrical machines, its use has been much more limited. In spite of this fact, the potential of this tool, together with the progressive decrease in the price of infrared cameras, make this technique a very interesting option to, at least, complement, the diagnosis provided by other well-known techniques, such as current or vibration data analysis. In this context, infrared thermography has recently shown potential for the detection of motor failures including misalignments, cooling problems, bearing damages or connection defects. This work presents several industrial cases that help to illustrate the effectiveness of this technique for the detection of a wide range of faults in field induction motors. The data obtained with this technique made it possible to detect the presence of faults of diverse nature (electrical, mechanical, thermal and environmental); these data were very useful to either diagnose or to complement the diagnosis provided by other tools.This work was supported in part by the Spanish Ministerio de Economia y Competitividad and the FEDER Program in the framework of the Proyectos I+D del Subprograma de Generacion de Conocimiento, Programa Estatal de Fomento de la Investigacion Cientifica y Tecnica de Excelencia under Grant DPI2014-52842-P.Lopez-Perez, D.; Antonino-Daviu, J. (2017). Application of infrared thermography to failure detection in industrial induction motors: case stories. IEEE Transactions on Industry Applications. 53(3):1901-1908. https://doi.org/10.1109/TIA.2017.2655008S1901190853

Evaluating the Thermal Condition of Electrical Equipment via IRT Image Analysis

The integrity of electrical power equipment is of paramount importance when itsupplies electricity throughout a facility. However, the reliability of the equipments will degraded after sometime, and appropriate maintenance has to be taken accordingly to avoid future faults. Infrared thermography (IRT) image analysis is a commonly used technique for diagnosing the reliability of electrical equipments. Conventionally, the analysis of infrared image is done manually and takes very long time for further analysis. This paper proposes an automatic thermal fault detection and classification system for evaluating thecondition of electrical equipment by analyzing its infrared image. First, the image is segmented to find the target region of interest (ROI). The detected regions which have the same region properties are grouped together in order to remove the unwanted regions. Finally, statistical features from each detected region are extracted and classified using the support vector machine (SVM) algorithm. The thermal condition of electrical equipments is evaluated based on qualitative measurement technique. The experimental result shows that the proposed system can detect and classify the thermal condition of electrical equipments

Infrared Thermography for the Assessment of Lumbar Sympathetic Blocks in Patients with Complex Regional Pain Syndrome

[ES] El síndrome de dolor regional complejo (SDRC) es un trastorno de dolor crónico debilitante que suele afectar a una extremidad, y se caracteriza por su compleja e incomprendida fisiopatología subyacente, lo que supone un reto para su diagnóstico y tratamiento. Para evitar el deterioro de la calidad de vida de los pacientes, la consecución de un diagnóstico y tratamiento tempranos marca un punto de inflexión. Entre los diferentes tratamientos, los bloqueos simpáticos lumbares (BSLs) tienen como objetivo aliviar el dolor y reducir algunos signos simpáticos de la afección. Este procedimiento intervencionista se lleva a cabo inyectando anestesia local alrededor de los ganglios simpáticos y, hasta ahora, se realiza frecuentemente bajo el control de diferentes técnicas de imagen, como los ultrasonidos o la fluoroscopia. Dado que la termografía infrarroja (TIR) ha demostrado ser una herramienta eficaz para evaluar la temperatura de la piel, y teniendo en cuenta el efecto vasodilatador que presentan los anestésicos locales inyectados, se ha considerado el uso de la IRT para la evaluación de los BSLs. El objetivo de esta tesis es, estudiar la capacidad de la TIR como una técnica complementaria para la evaluación de la eficacia en la ejecución de los BSLs. Para cumplir este objetivo, se han realizado tres estudios implementando la TIR en pacientes diagnosticados de SDRC de miembros inferiores sometidos a BSLs. El primer estudio se centra en la viabilidad de la TIR como herramienta complementaria para la evaluación de la eficacia ejecución de los BSLs. Cuando se realizan los BSLs, la colocación correcta de la aguja es crítica para llevar realizar el procedimiento técnicamente correcto y, en consecuencia, para lograr los resultados clínicos deseados. Para verificar la posición de la aguja, tradicionalmente se han utilizado técnicas de imagen, sin embargo, los BSLs bajo control fluoroscópico no siempre aseguran su exacta ejecución. Por este motivo, se han aprovechado las alteraciones térmicas inducidas por los anestésicos locales y se han evaluado mediante la TIR. Así, cuando en las imágenes infrarrojas se observaron cambios térmicos en la planta del pie afectado tras la inyección de lidocaína, se consideró que el BSL era exitoso. El segundo estudio trata del análisis cuantitativo de los datos térmicos recogidos en el entorno clínico a partir de diferentes parámetros basados en las temperaturas extraídas de ambos pies. Según los resultados, para predecir adecuadamente los BSLs exitosos, se deberían analizar las temperaturas de las plantas de los pies durante los primeros cuatro minutos tras la inyección del anestésico local. Así, la aplicación de la TIR en el entorno clínico podría ser de gran ayuda para evaluar la eficacia de ejecución de los BSLs mediante la evaluación de las temperaturas de los pies en tiempo real. Por último, el tercer estudio aborda el análisis cuantitativo mediante la implementación de herramientas de machine learning (ML) para evaluar su capacidad de clasificar automáticamente los BSLs. En este estudio se han utilizado una serie de características térmicas extraídas de las imágenes infrarrojas para evaluar cuatro algoritmos de ML para tres momentos diferentes después del instante de referencia (inyección de lidocaína). Los resultados indican que los cuatro modelos evaluados presentan buenos rendimientos para clasificar automáticamente los BSLs entre exitosos y fallidos. Por lo tanto, la combinación de parámetros térmicos junto con de clasificación ML muestra ser eficaz para la clasificación automática de los procedimientos de BSLs. En conclusión, el uso de la TIR como técnica complementaria en la práctica clínica diaria para la evaluación de los BSLs ha demostrado ser totalmente eficaz. Dado que es un método objetivo y relativamente sencillo de implementar, puede permitir que los médicos especialistas en dolor identifiquen los bloqueos realizados fallidos y, en consecuencia, puedan revertir esta situación.[CA] La síndrome de dolor regional complex (SDRC) és un trastorn de dolor crònic debilitant que sol afectar una extremitat, i es caracteritza per la seua complexa i incompresa fisiopatologia subjacent, la qual cosa suposa un repte per al seu diagnòstic i tractament. Per a evitar la deterioració de la qualitat de vida dels pacients, la consecució d'un diagnòstic i tractament primerencs marca un punt d'inflexió. Entre els diferents tractaments , els bloquejos simpàtics lumbars (BSLs) tenen com a objectiu alleujar el dolor i reduir alguns signes simpàtics de l'afecció. Aquest procediment intervencionista es duu a terme injectant anestèsia local al voltant dels ganglis simpàtics i, fins ara, es realitza freqüentment sota el control de diferents tècniques d'imatge, com els ultrasons o la fluoroscopia. Atés que la termografia infraroja (TIR) ha demostrat ser una eina eficaç per a avaluar la temperatura de la pell, i tenint en compte l'efecte vasodilatador que presenten els anestèsics locals injectats, s'ha considerat l'ús de la TIR per a l'avaluació dels BSLs. L'objectiu d'aquesta tesi és, estudiar la capacitat de la TIR com una tècnica complementària per a l'avaluació de l'eficàcia en l'execució dels BSLs. Per a complir aquest objectiu, s'han realitzat tres estudis implementant la TIR en pacients diagnosticats de SDRC de membres inferiors sotmesos a BSLs. El primer estudi avalua la viabilitat de la TIR com a eina complementària per a l'analisi de l'eficàcia en l'execució dels BSLs. Quan es realitzen els BSLs, la col·locació correcta de l'agulla és crítica per a dur a terme el procediment tècnicament correcte i, en conseqüència, per a aconseguir els resultats clínics desitjats. Per a verificar la posició de l'agulla, tradicionalment s'han utilitzat tècniques d'imatge, no obstant això, els BSLs baix control fluoroscòpic no sempre asseguren la seua exacta execució. Per aquest motiu, s'han aprofitat les alteracions tèrmiques induïdes pels anestèsics locals i s'han avaluat mitjançant la TIR. Així, quan en les imatges infraroges es van observar canvis tèrmics en la planta del peu afectat després de la injecció de lidocaIna, es va considerar que el BSL era exitós. El segon estudi tracta de l'anàlisi quantitativa de les dades tèrmiques recollides en l'entorn clínic a partir de diferents paràmetres basats en les temperatures extretes d'ambdós peus. Segons els resultats, per a predir adequadament l'execució exitosa d'un BSL, s'haurien d'analitzar les temperatures de les plantes dels peus durant els primers quatre minuts després de la injecció de l'anestèsic local. Així, l'implementació de la TIR en l'entorn clínic podria ser de gran ajuda per a avaluar l'eficàcia d'execució dels BSLs mitjançant l'avaluació de les temperatures dels peus en temps real. El tercer estudi aborda l'anàlisi quantitativa mitjançant la implementació d'eines machine learning (ML) per a avaluar la seua capacitat de classificar automàticament els BSLs. En aquest estudi s'han utilitzat una sèrie de característiques tèrmiques extretes de les imatges infraroges per a avaluar quatre algorismes de ML per a tres moments diferents després de l'instant de referència (injecció de lidocaïna). Els resultats indiquen que els quatre models avaluats presenten bons rendiments per a classificar automàticament els BSLs en exitosos i fallits. Per tant, la combinació de paràmetres tèrmics juntament amb models de classificació ML mostra ser eficaç per a la classificació automàtica dels procediments de BSLs. En conclusió, l'ús de la TIR com a tècnica complementària en la pràctica clínica diària per a l'avaluació dels BSLs ha demostrat ser totalment eficaç. Atés que és un mètode objectiu i relativament senzill d'implementar, pot ajudar els metges especialistes en dolor a identificar els bloquejos realitzats fallits i, en conseqüència, puguen revertir aquesta situació.[EN] Complex regional pain syndrome (CRPS) is a debilitating chronic pain condition that usually affects one limb, and it is characterized by its misunderstood underlying pathophysiology, resulting in both challenging diagnosis and treatment. To avoid the patients' impairment quality of life, the achievement of both an early diagnosis and treatment marks a turning point. Among the different treatment approaches, lumbar sympathetic blocks (LSBs) are addressed to alleviate the pain and reduce some sympathetic signs of the condition. This interventional procedure is performed by injecting local anaesthetic around the sympathetic ganglia and, until now, it has been performed under different imaging techniques, including the ultrasound or the fluoroscopy approaches. Since infrared thermography (IRT) has proven to be a powerful tool to evaluate skin temperatures and taking into account the vasodilatory effects of the local anaesthetics injected in the LSB, the use of IRT has been considered for the LSBs assessment. Therefore, the purpose of this thesis is to evaluate the capability of IRT as a complementary assessment technique for the LSBs procedures performance. To fulfil this aim, three studies have been conducted implementing the IRT in patients diagnosed with lower limbs CRPS undergoing LSBs. The first study focuses on the feasibility of IRT as a complementary assessment tool for LSBs performance, that is, for the confirmation of the proper needle position. When LSBs are performed, the correct needle placement is critical to carry out the procedure technically correct and, consequently, to achieve the desired clinical outcomes. To verify the needle placement position, imaging techniques have traditionally been used, however, LSBs under radioscopic guidance do not always ensure an exact performance. For this reason, the thermal alterations induced by the local anaesthetics, have been exploited and assessed by means of IRT. Thus, the LSB procedure was considered successfully performed when thermal changes within the affected plantar foot were observed in the infrared images after the lidocaine injection. The second study deals with the quantitative analysis of the thermal data collected in the clinical setting through the evaluation of different temperature-based parameters extracted from both feet. According to the results, the proper LSB success prediction could be achieved in the first four minutes after the block through the evaluation of the feet skin temperatures. Therefore, the implementation of IRT in the clinical setting might be of great help in assessing the LSBs performance by evaluating the plantar feet temperatures in real time. Finally, the third study addresses the quantitative analysis by implementing machine learning (ML) tools to assess their capability to automatically classify LSBs. In this study, a set of thermal features retrieved from the infrared images have been used to evaluate four ML algorithms for three different moments after the baseline time (lidocaine injection). The results indicate that all four models evaluated present good performance metrics to automatically classify LSBs into successful and failed. Therefore, combining infrared features with ML classification models shows to be effective for the LSBs procedures automatic classification. In conclusion, the use of IRT as a complementary technique in daily clinical practice for LSBs assessment has been evidenced entirely effective. Since IRT is an objective method and it is not very demanding to perform, it is of great help for pain physicians to identify failed procedures, and consequently, it allow them to reverse this situation.Cañada Soriano, M. (2022). Infrared Thermography for the Assessment of Lumbar Sympathetic Blocks in Patients with Complex Regional Pain Syndrome [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/181699TESI

Combination of Noninvasive Approaches for General Assessment of Induction Motors

[EN] There exists no single quantity able to diagnose all possible failures taking place in induction motors. Currents and vibrations monitoring are rather common in the industry, but each of these quantities alone can only detect some specific failures. Moreover, even for the specific faults that a quantity is supposed to detect, many problems may rise. As a consequence, a reliable and general diagnosis system cannot rely on a single quantity. On the other hand, it would be desirable to rely on quantities that can be measured in a noninvasive way, which is a crucial requirement in many industrial applications. This paper proposes a twofold method to detect electromechanical failures in induction motors. The method relies on analysis of currents (steady state + transient) combined with analysis of infrared data captured by using appropriate cameras. Each of these noninvasive techniques may provide complementary information that may be very useful to diagnose an enough wide range of failures. In the present paper, the detection of three illustrative faults is analyzed: broken rotor bars, cooling system problems and bearing failures. The results show the potential of the methodology that may be particularly suitable for large, expensive motors, where the prevention of eventual failures justifies the costs of such system, due to the catastrophic implications that these unexpected faults may have.Picazo-Rodenas, MJ.; Antonino-Daviu, J.; Climente Alarcon, V.; Royo, R.; Mota-Villar, A. (2015). Combination of Noninvasive Approaches for General Assessment of Induction Motors. IEEE Transactions on Industry Applications. 51(3):2172-2180. doi:10.1109/TIA.2014.2382880S2172218051

Classification and Decision Making of Medical Infrared Thermal Images

Medical infrared thermal imaging (MITI) is a technique that allows safe and non-invasive recording of skin surface temperature distribution. The images gained provide underlining physiological information on the blood flow, vasoconstriction/vasodilatation, inflammation, transpiration or other processes that can contribute to skin temperature. This medical imaging modality has been available for nearly six decades and has proved to be useful for vascular, neurological and musculoskeletal conditions. Since the recordings are digital, in the form of a matrix of numbers (image), it can be computationally analyzed by a specialist mainly performing processing and analysis operations manually supported by proprietary software solutions. This limits the number of images that can be processed, making difficult for knowledge to evolve, expertise to develop and information to be shared. This chapter aims to disclose the medical imaging method, along with its particularities, principles, applications, advantages and disadvantages. The chapter introduces all available classification and decision making methods that can be employed using digital information, together with a literature review of their operation in the biomedical applications of infrared thermal imaging.info:eu-repo/semantics/publishedVersio

Usage of Infrared-Based Technologies in Forensic Sciences

Infrared (IR) radiation comprises a beam located in the electromagnetic radiation family; it arises from the thermal vibrations of radiation that have longer wavelengths than visible light, but shorter wavelengths than microwave radiation. Its wavelength is between 750 nm and 1 mm. The amount of thermal IR radiation emitted by an object is associated with the temperature of the object, the surface area of the object and the spreading of light. IR-based technologies have been demonstrated as a method of evidence identification in forensic sciences in addition to many daily uses

Application of infrared thermography in computer aided diagnosis

The invention of thermography, in the 1950s, posed a formidable problem to the research community: What is the relationship between disease and heat radiation captured with Infrared (IR) cameras? The research community responded with a continuous effort to find this crucial relationship. This effort was aided by advances in processing techniques, improved sensitivity and spatial resolution of thermal sensors. However, despite this progress fundamental issues with this imaging modality still remain. The main problem is that the link between disease and heat radiation is complex and in many cases even non-linear. Furthermore, the change in heat radiation as well as the change in radiation pattern, which indicate disease, is minute. On a technical level, this poses high requirements on image capturing and processing. On a more abstract level, these problems lead to inter-observer variability and on an even more abstract level they lead to a lack of trust in this imaging modality. In this review, we adopt the position that these problems can only be solved through a strict application of scientific principles and objective performance assessment. Computing machinery is inherently objective; this helps us to apply scientific principles in a transparent way and to assess the performance results. As a consequence, we aim to promote thermography based Computer-Aided Diagnosis (CAD) systems. Another benefit of CAD systems comes from the fact that the diagnostic accuracy is linked to the capability of the computing machinery and, in general, computers become ever more potent. We predict that a pervasive application of computers and networking technology in medicine will help us to overcome the shortcomings of any single imaging modality and this will pave the way for integrated health care systems which maximize the quality of patient care