5,453 research outputs found
Conception, development and evaluation of polymer-based screen-printed textile electrodes for biopotential monitoring
Wearable technologies represent the new frontier of vital signs monitoring in different
applications, from fitness to health. With the progressive miniaturization of the electronic
components, enabling the implementation of portable and hand-held acquisition and recording
devices, the research focus has shifted toward the development of effective and unobtrusive
textile electrodes. This work deals with the study, development and characterization of
organic-polymer-based electrodes for biopotentials.
After an overview of the main materials and fabrication technologies presented so far in
the scientific literature, the possibility to use these electrodes as an alternative to the Ag/AgCl
disposable gelled electrodes usually adopted in clinical practice was tested. For this purpose,
several textile electrode realization techniques were studied and optimized, in order to create
electrodes with adequate features to detect two fundamental physiological signals: the electrocardiogram
(ECG) and the electromyogram (EMG). The electrodes were obtained by depositing
on the fabric the organic bio-compatible polymer poly(3,4-ethylenedioxythiophene)
doped with poly(4-styrenesulfonate) (PEDOT:PSS) with three deposition procedures: dipcoating,
ink-jet printing and screen printing. The physical\u2013chemical properties of the polymer
solution were varied for each procedure to obtain an optimal and reproducible result. For
what concerns the ECG signal, the research activity focused on screen-printed textile electrodes
and their performance was first assessed by benchtop measurements and then by
human trials. The first tests demonstrated that, by adding solid or liquid electrolytes the
electrodes, the largest part of the characteristics required by the ANSI/AAMI EC12:2000
standard for gelled ECG electrodes can be achieved. Tests performed in different conditions
showed that the skin contact impedance and the ECG morphological features are highly
similar to those obtainable with disposable gelled Ag/AgCl electrodes (\u3c1 > 0.99). A trial
with ten subjects revealed also the capability of the proposed electrodes to accurately capture
with clinical instruments an ECG morphology with performance comparable to off-the-shelf
disposable electrodes. Furthermore, the proposed textile electrodes preserve their electrical
properties and functionality even after several mild washing cycles, while they suffered
physical stretching.
Similar tests were performed on screen-printed textile electrodes fabricated in two different
sizes to test them as EMG sensors, with and without electrolytes. After a series of
controlled acquisitions performed by electro-stimulating the muscles in order to analyze the
waveform morphologu of the M-wave, the statistical analysis showed a high similarity in
terms of rms of the noise and electrode-skin impedance between conventional and textile
electrodes with the addition of solid hydrogel and saline solution. Furthermore, the M-wave
recorded on the tibialis anterior muscle during the stimulation of the peroneal nerve was
comparatively analyzed between conventional and textile electrodes. The comparison provided
an R2 value higher than 97% in all measurement conditions. These results opened their
use in smart garments for real application scenarios and for this purpose were developed a
couple of smart shirts able to detect the EGC and the EMG signal. The results indicated that
this approach could be adopted in the future for the development of smart garments able to
comfortably detect physiological signals
Recommended from our members
Gestural patterns: a new method of printed textile design using motion capture technology
The aim of this research is to develop a new method, Hybrid Printing System (HPS) to explore digital craft methods to create surface patterns for printed textile design. This novel method of creating âhandcraftedâ prints is a result of the integration of two technologies such as motion-capture (MOCAP) and digital textile printing (DTP). The research towards such an innovation required a current, historical, contextual and experimental study of use of motion capture in Art &Design. The research contextualises the hand and its relationship to digital crafting methods in printed textile design, the digital medium and the process of audience participation in printed textile design to create a new conceptual framework balanced in practice and theory. The practical research then develops three new methods of motion capture such as, motion tracing, motion sensing and motion tracking to generate gestural motifs and gestural patterns. This thesis and the accompanying set of experimental work demonstrates that HPS culminates in developing new aesthetics through a new mode of creation in a new medium, which will impact the user, the designer and the product as a part of the cyclical process. HPS is an advancement of printed textile design, centred in active participation of its audience at the generative stage of design. This results in a shifting role of a designer and subverts the current model of printed textile design practice. HPS is a democratic design process where the participants design for themselves, have their own voice, which induces a sense of community, togetherness and harmony in the creative process
Graphene textiles towards soft wearable interfaces for electroocular remote control of objects
Study of eye movements (EMs) and measurement of the resulting biopotentials, referred to as electrooculography (EOG), may find increasing use in applications within the domain of activity recognition, context awareness, mobile human-computer interaction (HCI) applications, and personalized medicine provided that the limitations of conventional âwetâ electrodes are addressed. To overcome the limitations of conventional electrodes, this work, reports for the first time the use and characterization of graphene-based electroconductive textile electrodes for EOG acquisition using a custom-designed embedded eye tracker. This self-contained wearable device consists of a headband with integrated textile electrodes and a small, pocket-worn, battery-powered hardware with real-time signal processing which can stream data to a remote device over Bluetooth. The feasibility of the developed gel-free, flexible, dry textile electrodes was experimentally authenticated through side-by-side comparison with pre-gelled, wet, silver/silver chloride (Ag/AgCl) electrodes, where the simultaneously and asynchronous recorded signals displayed correlation of up to ~87% and ~91% respectively over durations reaching hundred seconds and repeated on several participants. Additionally, an automatic EM detection algorithm is developed and the performance of the graphene-embedded âall-textileâ EM sensor and its application as a control element toward HCI is experimentally demonstrated. The excellent success rate ranging from 85% up to 100% for eleven different EM patterns demonstrates the applicability of the proposed algorithm in wearable EOG-based sensing and HCI applications with graphene textiles. The system-level integration and the holistic design approach presented herein which starts from fundamental materials level up to the architecture and algorithm stage is highlighted and will be instrumental to advance the state-of-the-art in wearable electronic devices based on sensing and processing of electrooculograms
Textile materials
In this specialised publication, the reader will find research results and real engineering developments in the field of modern technical textiles.
Modern technical textile materials, ranging from ordinary reinforcing fabrics in the construction and production of modern composite materials to specialised textile materials in the composition of electronics, sensors and other intelligent devices, play an important role in many areas of human technical activity. The use of specialized textiles, for example, in medicine makes it possible to achieve important results in diagnostics, prosthetics, surgical practice and the practice of using specialized fabrics at the health recovery stage.
The use of reinforcing fabrics in construction can significantly improve the mechanical properties of concrete and various plaster mixtures, which increases the reliability and durability of various structures and buildings in general.
In mechanical engineering, the use of composite materials reinforced with special textiles can simultaneously reduce weight and improve the mechanical properties of machine parts. Fabric- reinforced composites occupy a significant place in the automotive industry, aerospace engineering, and shipbuilding. Here, the mechanical reliability and thermal resistance of the body material of the product, along with its low weight, are very relevant.
The presented edition will be useful and interesting for engineers and researchers whose activities are related to the design, production and application of various technical textile materials
Index to 1984 NASA Tech Briefs, volume 9, numbers 1-4
Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1984 Tech B Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences
NASA Tech Briefs Index, 1977, volume 2, numbers 1-4
Announcements of new technology derived from the research and development activities of NASA are presented. Abstracts, and indexes for subject, personal author, originating center, and Tech Brief number are presented for 1977
Selected Papers from Experimental Stress Analysis 2020
This Special Issue consists of selected papers from the Experimental Stress Analysis 2020 conference. Experimental Stress Analysis 2020 was organized with the support of the Czech Society for Mechanics, Expert Group of Experimental Mechanics, and was, for this particular year, held online in 19â22 October 2020. The objectives of the conference included identification of current situation, sharing professional experience and knowledge, discussing new theoretical and practical findings, and the establishment and strengthening of relationships between universities, companies, and scientists from the field of experimental mechanics in mechanical and civil engineering. The topics of the conference were focused on experimental research on materials and structures subjected to mechanical, thermalâmechanical, and dynamic loading, including damage, fatigue, and fracture analyses. The selected papers deal with top-level contemporary phenomena, such as modern durable materials, numerical modeling and simulations, and innovative non-destructive materialsâ testing
- âŠ