Automatic Adaptation of SOA Systems Supported by Machine Learning

Part 3: Service OrientationInternational audienceRecent advances in the development of information systems have led to increased complexity and cost in terms of the required maintenance and management. On the other hand, systems built in accordance with modern architectural paradigms, such as Service Oriented Architecture (SOA), posses features enabling extensive adaptation, not present in traditional systems. Automatic adaptation mechanisms can be used to facilitate system management. The goal of this work is to show that automatic adaptation can be effectively implemented in SOA systems using machine learning algorithms. The presented concept relies on a combination of clustering and reinforcement learning algorithms. The paper discusses assumptions which are necessary to apply machine learning algorithms to automatic adaptation of SOA systems, and presents a machine learning-based management framework prototype. Possible benefits and disadvantages of the presented approach are discussed and the approach itself is validated with a representative case study

Exploring Maintainability Assurance Research for Service- and Microservice-Based Systems: Directions and Differences

To ensure sustainable software maintenance and evolution, a diverse set of activities and concepts like metrics, change impact analysis, or antipattern detection can be used. Special maintainability assurance techniques have been proposed for service- and microservice-based systems, but it is difficult to get a comprehensive overview of this publication landscape. We therefore conducted a systematic literature review (SLR) to collect and categorize maintainability assurance approaches for service-oriented architecture (SOA) and microservices. Our search strategy led to the selection of 223 primary studies from 2007 to 2018 which we categorized with a threefold taxonomy: a) architectural (SOA, microservices, both), b) methodical (method or contribution of the study), and c) thematic (maintainability assurance subfield). We discuss the distribution among these categories and present different research directions as well as exemplary studies per thematic category. The primary finding of our SLR is that, while very few approaches have been suggested for microservices so far (24 of 223, ?11%), we identified several thematic categories where existing SOA techniques could be adapted for the maintainability assurance of microservices

Situational Enterprise Services

The ability to rapidly find potential business partners as well as rapidly set up a collaborative business process is desirable in the face of market turbulence. Collaborative business processes are increasingly dependent on the integration of business information systems. Traditional linking of business processes has a large ad hoc character. Implementing situational enterprise services in an appropriate way will deliver the business more flexibility, adaptability and agility. Service-oriented architectures (SOA) are rapidly becoming the dominant computing paradigm. It is now being embraced by organizations everywhere as the key to business agility. Web 2.0 technologies such as AJAX on the other hand provide good user interactions for successful service discovery, selection, adaptation, invocation and service construction. They also balance automatic integration of services and human interactions, disconnecting content from presentation in the delivery of the service. Another Web technology, such as semantic Web, makes automatic service discovery, mediation and composition possible. Integrating SOA, Web 2.0 Technologies and Semantic Web into a service-oriented virtual enterprise connects business processes in a much more horizontal fashion. To be able run these services consistently across the enterprise, an enterprise infrastructure that provides enterprise architecture and security foundation is necessary. The world is constantly changing. So does the business environment. An agile enterprise needs to be able to quickly and cost-effectively change how it does business and who it does business with. Knowing, adapting to diffident situations is an important aspect of today’s business environment. The changes in an operating environment can happen implicitly and explicitly. The changes can be caused by different factors in the application domain. Changes can also happen for the purpose of organizing information in a better way. Changes can be further made according to the users' needs such as incorporating additional functionalities. Handling and managing diffident situations of service-oriented enterprises are important aspects of business environment. In the chapter, we will investigate how to apply new Web technologies to develop, deploy and executing enterprise services

Context Awareness for Self-adaptive and Highly Available Production Systems

Part 8: Robotics and ManufacturingInternational audienceA new approach for the realization of self-adaptive and highly available production systems based on a context aware approach, allowing self-adaptation of flexible manufacturing processes in production systems and effective knowledge sharing to support maintenance, is presented. The usage of dynamically changing context as basis for adaptation of flexible manufacturing lines/processes and effective knowledge sharing is proposed. The presented solution includes services for context extraction, adaptation and self-learning allowing high adaptation of production systems depending on the identified context. A generic architecture following Service Oriented Principles is presented allowing for integration of the proposed solution into various production systems. A successful initial application of the developed solution in real world manufacturing environment is presented

Maintenance Knowledge Management with Fusion of CMMS and CM

Abstract- Maintenance can be considered as an information, knowledge processing and management system. The management of knowledge resources in maintenance is a relatively new issue compared to Computerized Maintenance Management Systems (CMMS) and Condition Monitoring (CM) approaches and systems. Information Communication technologies (ICT) systems including CMMS, CM and enterprise administrative systems amongst others are effective in supplying data and in some cases information. In order to be effective the availability of high-quality knowledge, skills and expertise are needed for effective analysis and decision-making based on the supplied information and data. Information and data are not by themselves enough, knowledge, experience and skills are the key factors when maximizing the usability of the collected data and information. Thus, effective knowledge management (KM) is growing in importance, especially in advanced processes and management of advanced and expensive assets. Therefore efforts to successfully integrate maintenance knowledge management processes with accurate information from CMMSs and CM systems will be vital due to the increasing complexities of the overall systems. Low maintenance effectiveness costs money and resources since normal and stable production cannot be upheld and maintained over time, lowered maintenance effectiveness can have a substantial impact on the organizations ability to obtain stable flows of income and control costs in the overall process. Ineffective maintenance is often dependent on faulty decisions, mistakes due to lack of experience and lack of functional systems for effective information exchange [10]. Thus, access to knowledge, experience and skills resources in combination with functional collaboration structures can be regarded as vital components for a high maintenance effectiveness solution. Maintenance effectiveness depends in part on the quality, timeliness, accuracy and completeness of information related to machine degradation state, based on which decisions are made. Maintenance effectiveness, to a large extent, also depends on the quality of the knowledge of the managers and maintenance operators and the effectiveness of the internal & external collaborative environments. With emergence of intelligent sensors to measure and monitor the health state of the component and gradual implementation of ICT) in organizations, the conceptualization and implementation of E-Maintenance is turning into a reality. Unfortunately, even though knowledge management aspects are important in maintenance, the integration of KM aspects has still to find its place in E-Maintenance and in the overall information flows of larger-scale maintenance solutions. Nowadays, two main systems are implemented in most maintenance departments: Firstly, Computer Maintenance Management Systems (CMMS), the core of traditional maintenance record-keeping practices that often facilitate the usage of textual descriptions of faults and actions performed on an asset. Secondly, condition monitoring systems (CMS). Recently developed (CMS) are capable of directly monitoring asset components parameters; however, attempts to link observed CMMS events to CM sensor measurements have been limited in their approach and scalability. In this article we present one approach for addressing this challenge. We argue that understanding the requirements and constraints in conjunction - from maintenance, knowledge management and ICT perspectives - is necessary. We identify the issues that need be addressed for achieving successful integration of such disparate data types and processes (also integrating knowledge management into the “data types” and processes)

Adapter module for self-learning production systems

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica, Sistemas e ComputadoresThe dissertation presents the work done under the scope of the NP7 Self-Learning project regarding the design and development of the Adapter component as a foundation for the Self-Learning Production Systems (SLPS). This component is responsible to confer additional proprieties to production systems such as lifecycle learning, optimization of process parameters and, above all, adaptation to different production contexts. Therefore, the SLPS will be an evolvable system capable to self-adapt and learn in response to dynamic contextual changes in manufacturing production process in which it operates. The key assumption is that a deeper use of data mining and machine learning techniques to process the huge amount of data generated during the production activities will allow adaptation and enhancement of control and other manufacturing production activities such as energy use optimization and maintenance. In this scenario, the SLPS Adapter acts as a doer and is responsible for dynamically adapting the manufacturing production system parameters according to changing manufacturing production contexts and, most important, according to the history of the manufacturing production process acquired during SLPS run time.To do this, a Learning Module has been also developed and embedded into the SLPS Adapter. The SLPS Learning Module represents the processing unit of the SLPS Adapter and is responsible to deliver Self-learning capabilities relying on data mining and operator’s feedback to up-date the execution of adaptation and context extraction at run time. The designed and implemented SLPS Adapter architecture is assessed and validated into several application scenario provided by three industrial partners to assure industrial relevant self-learning production systems. Experimental results derived by the application of the SLPS prototype into real industrial environment are also presented