5 research outputs found

    Computational methods for the analysis of functional 4D-CT chest images.

    Get PDF
    Medical imaging is an important emerging technology that has been intensively used in the last few decades for disease diagnosis and monitoring as well as for the assessment of treatment effectiveness. Medical images provide a very large amount of valuable information that is too huge to be exploited by radiologists and physicians. Therefore, the design of computer-aided diagnostic (CAD) system, which can be used as an assistive tool for the medical community, is of a great importance. This dissertation deals with the development of a complete CAD system for lung cancer patients, which remains the leading cause of cancer-related death in the USA. In 2014, there were approximately 224,210 new cases of lung cancer and 159,260 related deaths. The process begins with the detection of lung cancer which is detected through the diagnosis of lung nodules (a manifestation of lung cancer). These nodules are approximately spherical regions of primarily high density tissue that are visible in computed tomography (CT) images of the lung. The treatment of these lung cancer nodules is complex, nearly 70% of lung cancer patients require radiation therapy as part of their treatment. Radiation-induced lung injury is a limiting toxicity that may decrease cure rates and increase morbidity and mortality treatment. By finding ways to accurately detect, at early stage, and hence prevent lung injury, it will have significant positive consequences for lung cancer patients. The ultimate goal of this dissertation is to develop a clinically usable CAD system that can improve the sensitivity and specificity of early detection of radiation-induced lung injury based on the hypotheses that radiated lung tissues may get affected and suffer decrease of their functionality as a side effect of radiation therapy treatment. These hypotheses have been validated by demonstrating that automatic segmentation of the lung regions and registration of consecutive respiratory phases to estimate their elasticity, ventilation, and texture features to provide discriminatory descriptors that can be used for early detection of radiation-induced lung injury. The proposed methodologies will lead to novel indexes for distinguishing normal/healthy and injured lung tissues in clinical decision-making. To achieve this goal, a CAD system for accurate detection of radiation-induced lung injury that requires three basic components has been developed. These components are the lung fields segmentation, lung registration, and features extraction and tissue classification. This dissertation starts with an exploration of the available medical imaging modalities to present the importance of medical imaging in today’s clinical applications. Secondly, the methodologies, challenges, and limitations of recent CAD systems for lung cancer detection are covered. This is followed by introducing an accurate segmentation methodology of the lung parenchyma with the focus of pathological lungs to extract the volume of interest (VOI) to be analyzed for potential existence of lung injuries stemmed from the radiation therapy. After the segmentation of the VOI, a lung registration framework is introduced to perform a crucial and important step that ensures the co-alignment of the intra-patient scans. This step eliminates the effects of orientation differences, motion, breathing, heart beats, and differences in scanning parameters to be able to accurately extract the functionality features for the lung fields. The developed registration framework also helps in the evaluation and gated control of the radiotherapy through the motion estimation analysis before and after the therapy dose. Finally, the radiation-induced lung injury is introduced, which combines the previous two medical image processing and analysis steps with the features estimation and classification step. This framework estimates and combines both texture and functional features. The texture features are modeled using the novel 7th-order Markov Gibbs random field (MGRF) model that has the ability to accurately models the texture of healthy and injured lung tissues through simultaneously accounting for both vertical and horizontal relative dependencies between voxel-wise signals. While the functionality features calculations are based on the calculated deformation fields, obtained from the 4D-CT lung registration, that maps lung voxels between successive CT scans in the respiratory cycle. These functionality features describe the ventilation, the air flow rate, of the lung tissues using the Jacobian of the deformation field and the tissues’ elasticity using the strain components calculated from the gradient of the deformation field. Finally, these features are combined in the classification model to detect the injured parts of the lung at an early stage and enables an earlier intervention

    Left Ventricular Viability Maps : Fusion of Multimodal Images of Coronary Morphology and Functional Information

    Get PDF
    RÉSUMÉ Les maladies coronariennes demeurent encore la première cause de décès aux Etats-Unis étant donné que le taux de mortalité lié à ces maladies enregistré en 2005 est d’une personne sur cinq. Les sténoses (obstructions des artères coronaires) se manifestent par un rétrécissement du diamètre des coronaires, produisant une ischémie soit une réduction du flot sanguin vers le myocarde (le muscle cardiaque). Dans les cas les plus graves, les cellules qui composent le myocarde meurent définitivement et perdent leur fonction contractile. En présence de cette maladie les cliniciens ont recours à l’imagerie médicale pour étudier l’état du myocarde afin de déterminer si les cellules qui le composent sont mortes ou non ainsi que pour diagnostiquer les sténoses dans les coronaires. Actuellement, le clinicien utilise l’imagerie nucléaire pour étudier la perfusion du myocarde afin de déterminer son état. Une projection de cette information sur un modèle segmenté du myocarde, soit le modèle à 17-segments, établie le lien entre les zones atteintes et les coronaires qui sont les plus responsables de leur irrigation. Ce n’est que par la suite, lors d’une angiographie, que le clinicien pourra identifier les sténoses et possiblement intervenir par revascularisation. Une autre méthode de visualisation de la structure coronarienne et de la présence de sténoses est la méthode Green Lane. Le clinicien reproduit la structure des coronaires sur une carte circulaire en se basant sur l’angiographie. L’objectif de notre projet de recherche est de créer un modèle spécifique au patient où il serait possible de voir les territoires coronariens sur la surface du myocarde fusionnés avec la viabilité myocardique. Ce modèle s’adapterait au patient et permettrait l’étude d’autres groupes de coronaires, ce qui n’est pas possible avec le modèle à 17-segments qui est fixe et ne présente que les trois groupes principaux de coronaires (coronaire droite, gauche et circonflexe). De plus, ce modèle divise la surface de l’épicarde en segments à partir de données statistiques qui sont limitées par la nature et la représentativité de l’échantillon de la population considérée et ne permet pas de visualiser la distribution de perte de viabilité sur la surface épicardique.---------- ABSTRACT Coronary heart disease (CHD) can be attributed to the build up of plaque in the coronary arteries (atherosclerosis) which leads to ischemia, an insufficient supply of blood to the heart wall, which results in myocardial dysfunction. When ischemia remains untreated an infarction may appear (areas of necrosis in cardiac tissues) and consequently the heart’s contractility is affected, which may lead to death. This disease is the basis of one of every five deaths in the United States during 2005, elevating this disease to the largest cause of death in United States. In standard clinical practice, perfusion and viability studies allow clinicians to examine the extent and the severity of CHD over the myocardium. Then, by consulting a population-based coronary territory model, such as the 17-segment model, the clinician mentally integrates affected areas of myocardium, found in nuclear or magnetic resonance imaging, to coronaries that typically irrigate this region with blood. However, population-based models do not fit every patient. There are individuals whose coronary tree structure deviates from that of the majority of the population. In addition, the 17-segment model limits the number of coronary groups to three: left coronary artery (LAD), right coronary artery (RCA) and left circumflex (LCX). Moreover this map is not continuous; it divides the myocardial surface in segments.Our objective is therefore to create a patient-specific map explicitly combining coronary territories and myocardial viability. This continuous model would adapt to the patient and allow the study of groups of coronary unavailable with standard models. After having identified loss of viability, the clinician would use this model to infer the most likely obstructed coronary artery responsible for myocardial damage. Visualization of the loss of viability along with coronary structure would replace the physician’s task of mentally integrating information from various sources

    Sub-pixel Registration In Computational Imaging And Applications To Enhancement Of Maxillofacial Ct Data

    Get PDF
    In computational imaging, data acquired by sampling the same scene or object at different times or from different orientations result in images in different coordinate systems. Registration is a crucial step in order to be able to compare, integrate and fuse the data obtained from different measurements. Tomography is the method of imaging a single plane or slice of an object. A Computed Tomography (CT) scan, also known as a CAT scan (Computed Axial Tomography scan), is a Helical Tomography, which traditionally produces a 2D image of the structures in a thin section of the body. It uses X-ray, which is ionizing radiation. Although the actual dose is typically low, repeated scans should be limited. In dentistry, implant dentistry in specific, there is a need for 3D visualization of internal anatomy. The internal visualization is mainly based on CT scanning technologies. The most important technological advancement which dramatically enhanced the clinician\u27s ability to diagnose, treat, and plan dental implants has been the CT scan. Advanced 3D modeling and visualization techniques permit highly refined and accurate assessment of the CT scan data. However, in addition to imperfections of the instrument and the imaging process, it is not uncommon to encounter other unwanted artifacts in the form of bright regions, flares and erroneous pixels due to dental bridges, metal braces, etc. Currently, removing and cleaning up the data from acquisition backscattering imperfections and unwanted artifacts is performed manually, which is as good as the experience level of the technician. On the other hand the process is error prone, since the editing process needs to be performed image by image. We address some of these issues by proposing novel registration methods and using stonecast models of patient\u27s dental imprint as reference ground truth data. Stone-cast models were originally used by dentists to make complete or partial dentures. The CT scan of such stone-cast models can be used to automatically guide the cleaning of patients\u27 CT scans from defects or unwanted artifacts, and also as an automatic segmentation system for the outliers of the CT scan data without use of stone-cast models. Segmented data is subsequently used to clean the data from artifacts using a new proposed 3D inpainting approach
    corecore