A Survey on Investigating the Need for Intelligent Power-Aware Load Balanced Routing Protocols for Handling Critical Links in MANETs

In mobile ad hoc networks connectivity is always an issue of concern. Due to dynamism in the behavior of mobile nodes, efficiency shall be achieved only with the assumption of good network infrastructure. Presence of critical links results in deterioration which should be detected in advance to retain the prevailing communication setup. This paper discusses a short survey on the specialized algorithms and protocols related to energy efficient load balancing for critical link detection in the recent literature. This paper also suggests a machine learning based hybrid power-aware approach for handling critical nodes via load balancing

A mobile agent and message ferry mechanism based routing for delay tolerant network

Delay Tolerant Network (DTN) is a class of networks characterized by long delays, frequent disconnections and partitioning of communication paths between network nodes. Due to the frequent disconnection and network partitioning, the overall performance of the network will be deteriorated sharply. The problem is how to make the network fairly connected to optimize data routing and enhance the performance of a network. The aim of this study is to improve the performance of DTN by minimizing end-to-end delivery time and increasing message delivery ratio. Therefore, this research tackles the problem of intermittent connectivity and network partitioning by introducing Agents and Ferry Mechanism based Routing (AFMR). The AFMR comprises of two stages by applying two schemes: mobile agents and ferry mechanism. The agents' scheme is proposed to deal with intermittent connectivity and network partitioning by collecting the basic information about network connection such as signal strength, nodes position in the network and distance to the destination nodes to minimize end-to-end delivery time. The second stage is to increase the message delivery ratio by moving the nodes towards the path with available network connectivity based on agents' feedback. The AFMR is evaluated through simulations and the results are compared with those of Epidemic, PRoPHET and Message Ferry (MF). The findings demonstrate that AFMR is superior to all three, with respect to the average end-to-end delivery time, message delivery ratio, network load and message drop ratio, which are regarded as extremely important metrics for the evaluation of DTN routing protocols. The AFMR achieves improved network performance in terms of end-to-end delivery time (56.3%); enhanced message delivery ratio (60.0%); mitigation of message drop (63.5%) and reduced network load (26.1 %). The contributions of this thesis are to enhance the performance of DTN by significantly overcoming the intermittent connectivity and network partitioning problems in the network

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of-the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: quality-of-service and video communication, routing protocol and cross-layer design. A few interesting problems about security and delay-tolerant networks are also discussed. This book is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks

Supporting Internet Access and Quality of Service in Distributed Wireless Ad Hoc Networks

In this era of wireless hysteria, with continuous technological advances in wireless communication and new wireless technologies becoming standardized at a fast rate, we can expect an increased interest for wireless networks, such as ad hoc and mesh networks. These networks operate in a distributed manner, independent of any centralized device. In order to realize the practical benefits of ad hoc networks, two challenges (among others) need to be considered: distributed QoS guarantees and multi-hop Internet access. In this thesis we present conceivable solutions to both of these problems. An autonomous, stand-alone ad hoc network is useful in many cases, such as search and rescue operations and meetings where participants wish to quickly share information. However, an ad hoc network connected to the Internet is even more desirable. This is because Internet plays an important role in the daily life of many people by offering a broad range of services. In this thesis we present AODV+, which is our solution to achieve this network interconnection between a wireless ad hoc network and the wired Internet. Providing QoS in distributed wireless networks is another challenging, but yet important, task mainly because there is no central device controlling the medium access. In this thesis we propose EDCA with Resource Reservation (EDCA/RR), which is a fully distributed MAC scheme that provides QoS guarantees by allowing applications with strict QoS requirements to reserve transmission time for contention-free medium access. Our scheme is compatible with existing standards and provides both parameterized and prioritized QoS. In addition, we present the Distributed Deterministic Channel Access (DDCA) scheme, which is a multi-hop extension of EDCA/RR and can be used in wireless mesh networks. Finally, we have complemented our simulation studies with real-world ad hoc and mesh network experiments. With the experience from these experiments, we obtained a clear insight into the limitations of wireless channels. We could conclude that a wise design of the network architecture that limits the number of consecutive wireless hops may result in a wireless mesh network that is able to satisfy users’ needs. Moreover, by using QoS mechanisms like EDCA/RR or DDCA we are able to provide different priorities to traffic flows and reserve resources for the most time-critical applications

Qualité de service dans des environnements réseaux mobiles, contraints et hétérogènes

Les télécommunications sans fil ont connu ces dernières années un immense succès à tel point que le spectre des fréquences est désormais surchargé et nécessite la disponibilité de nouvelles ressources. Pour répondre à ce besoin, des techniques de réutilisation dynamique du spectre ont alors vu le jour sous la dénomination de radio cognitive. Elles consistent à partager de manière opportuniste et efficace certaines fréquences ayant été initialement allouées à d'autres systèmes. Cette thèse se place dans le contexte de réseaux sans fil tactiques hétérogènes comportant des segments de radios cognitives. La difficulté provient alors de la garantie de qualité de service de bout en bout : respect du débit négocié, du délai et de la gigue. Nous nous sommes tout d'abord intéressés au contrôle d'admission dans ce type de réseaux en proposant une méthode de calcul de bande passante résiduelle de bout en bout s'appuyant sur un algorithme de complexité polynomiale et pouvant être implanté de manière distribuée. Nous nous sommes ensuite concentrés sur le routage en proposant une nouvelle métrique tenant compte des particularités de ce type de réseaux. Enfin, nous nous focalisons sur la thématique du routage à contraintes multiples en étudiant et implantant en environnement réel des algorithmes d'approximation proposés dans la littérature. ABSTRACT : The unprecedented success of wireless telecommunication systems has resulted in the wireless spectrum becoming a scarce resource. Cognitive Radio systems have been proposed as the enabling technology allowing unlicensed equipments to opportunistically access the licensed spectrum when not in use by the licensed users. The focus of this thesis is on heterogeneous tactical networks deploying cognitive radios in parts or in their entirety. Such networks can be organized in multiple sub-networks, each characterized by a specific topology, medium access scheme and spectrum access policy. As a result, providing end-to-end Quality of Service guarantees in terms of bandwidth, delay and jitter, emerges as a key challenge. We first address the admission control in multi-hop cognitive radio networks and propose a polynomial time algorithm that can be implemented in a distributed fashion for estimating the end-to-end bandwidth. Then, we focus on routing and propose a new metric that takes into account the specifics of such networks. Finally, as quality of service requirements can be expressed using multiple metrics, we turn our attention to multi-constrained routing and implement on a real testbed low complexity approximation algorithms

Scalable and interference aware wi-fi mesh networks using cots devices

A crescente tendencia no acesso móvel tem sido potenciada pela tecnologia IEEE 802.11. Contudo, estas redes têm alcance rádio limitado. Para a extensão da sua cobertura é possível recorrer a redes emalhadas sem fios baseadas na tecnologia IEEE 802.11, com vantagem do ponto de vista do custo e da flexibilidade de instalação, face a soluções cabladas. Redes emalhadas sem fios constituídas por nós com apenas uma interface têm escalabilidade reduzida. A principal razão dessa limitação deve-se ao uso do mecanismo de acesso ao meio partilhado Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) em topologias multi-hop. Especificamente, o CSMA/CA não evita o problema do nó escondido levando ao aumento do número de colisões e correspondente degradação de desempenho com impacto direto no throughput e na latência. Com a redução da tecnologia rádio torna-se viável a utilização de múltiplos rádios por nó, sem com isso aumentar significativamente o custo da solução final de comunicações. A utilização de mais do que um rádio por nó de comuniações permite superar os problemas de desempenho inerentes ás redes formadas por nós com apenas um rádio. O objetivo desta tese, passa por desenvolver uma nova solução para redes emalhadas multi-cana, duar-radio, utilizando para isso novos mecanismos que complementam os mecanismos definidos no IEEE 802.11 para o estabelecimento de um Basic Service Set (BSS). A solução é baseada na solução WiFIX, um protocolo de routing para redes emalhadas de interface única e reutiliza os mecanismos já implementados nas redes IEEE 802.11 para difundir métricas que permitam à rede escalar de forma eficaz minimizando o impacto na performance. A rede multi-hop é formada por nós equipados com duas interfaces, organizados numa topologia hierárquica sobre múltiplas relações Access Point (AP) – Station (STA). Os resultados experimentais obtidos mostram a eficácia e o bom desempenho da solução proposta face à solução WiFIX original.The increasing trend on mobile access has been mainly potentied for IEEE 802.11 technology. However these networks suffer from reduced radio range. The extension of coverage can be potentiated by mesh deployments since they provide an ease, robust, flexible and cost effective solution for this problem. These networks are built upon nodes scattered in a mesh topology that form the backbone of an extended basic service set. Single radio Wireless Mesh Networks (WMN) however suffer from reduced scalability. The main reason to such limitation is the use of Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) in the multi-hop topology. Specifically, CSMA/CA fails to prevent the hidden and exposed node occurrence, which respectively, lead to an increase on the number of collisions and flow retentions. The direct impact on throughput and latency reduces the overall network performance to values that no longer match user increasing demands. As radio technology becomes cheaper, it became possible to equip nodes with multiple interfaces and operate them in multiple channels in order the reduce interference from links operating on a common channel. Therefore the goal of this thesis is to develop a new WMN Multi-Radio Multi-Channel (MRMC) solution addressing new mechanisms not yet covered in state of art. The proposed solution, is based on WiFIX, a Single Radio (SR) WMN routing protocol and reuses the mechanisms already implemented in IEEE 802.11 networks to broadcast metrics that enable the network to auto-configure efficiently and to scale with minimum overhead. The multi-hop backbone is formed by nodes equipped with two interfaces disposed in a hierarchical topology, under multiple Access Point (AP) - Station (STA) relations. The results obtained from an experimental testbed clearly show the effectiveness of the solution compared with the original WiFIX and its capability to scale resulting from the overhead control and co-channel interference reduction

Airborne Directional Networking: Topology Control Protocol Design

This research identifies and evaluates the impact of several architectural design choices in relation to airborne networking in contested environments related to autonomous topology control. Using simulation, we evaluate topology reconfiguration effectiveness using classical performance metrics for different point-to-point communication architectures. Our attention is focused on the design choices which have the greatest impact on reliability, scalability, and performance. In this work, we discuss the impact of several practical considerations of airborne networking in contested environments related to autonomous topology control modeling. Using simulation, we derive multiple classical performance metrics to evaluate topology reconfiguration effectiveness for different point-to-point communication architecture attributes for the purpose of qualifying protocol design elements

A new connectivity strategy for wireless mesh networks using dynamic spectrum access

The introduction of Dynamic Spectrum Access (DSA) marked an important juncture in the evolution of wireless networks. DSA is a spectrum assignment paradigm where devices are able to make real-time adjustment to their spectrum usage and adapt to changes in their spectral environment to meet performance objectives. DSA allows spectrum to be used more efficiently and may be considered as a viable approach to the ever increasing demand for spectrum in urban areas and the need for coverage extension to unconnected communities. While DSA can be applied to any spectrum band, the initial focus has been in the Ultra-High Frequency (UHF) band traditionally used for television broadcast because the band is lightly occupied and also happens to be ideal spectrum for sparsely populated rural areas. Wireless access in general is said to offer the most hope in extending connectivity to rural and unconnected peri-urban communities. Wireless Mesh Networks (WMN) in particular offer several attractive characteristics such as multi-hopping, ad-hoc networking, capabilities of self-organising and self-healing, hence the focus on WMNs. Motivated by the desire to leverage DSA for mesh networking, this research revisits the aspect of connectivity in WMNs with DSA. The advantages of DSA when combined with mesh networking not only build on the benefits, but also creates additional challenges. The study seeks to address the connectivity challenge across three key dimensions, namely network formation, link metric and multi-link utilisation. To start with, one of the conundrums faced in WMNs with DSA is that the current 802.11s mesh standard provides limited support for DSA, while DSA related standards such as 802.22 provide limited support for mesh networking. This gap in standardisation complicates the integration of DSA in WMNs as several issues are left outside the scope of the applicable standard. This dissertation highlights the inadequacy of the current MAC protocol in ensuring TVWS regulation compliance in multi-hop environments and proposes a logical link MAC sub-layer procedure to fill the gap. A network is considered compliant in this context if each node operates on a channel that it is allowed to use as determined for example, by the spectrum database. Using a combination of prototypical experiments, simulation and numerical analysis, it is shown that the proposed protocol ensures network formation is accomplished in a manner that is compliant with TVWS regulation. Having tackled the compliance problem at the mesh formation level, the next logical step was to explore performance improvement avenues. Considering the importance of routing in WMNs, the study evaluates link characterisation to determine suitable metric for routing purposes. Along this dimension, the research makes two main contributions. Firstly, A-link-metric (Augmented Link Metric) approach for WMN with DSA is proposed. A-link-metric reinforces existing metrics to factor in characteristics of a DSA channel, which is essential to improve the routing protocol's ranking of links for optimal path selection. Secondly, in response to the question of “which one is the suitable metric?”, the Dynamic Path Metric Selection (DPMeS) concept is introduced. The principal idea is to mechanise the routing protocol such that it assesses the network via a distributed probing mechanism and dynamically binds the routing metric. Using DPMeS, a routing metric is selected to match the network type and prevailing conditions, which is vital as each routing metric thrives or recedes in performance depending on the scenario. DPMeS is aimed at unifying the years worth of prior studies on routing metrics in WMNs. Simulation results indicate that A-link-metric achieves up to 83.4 % and 34.6 % performance improvement in terms of throughput and end-to-end delay respectively compared to the corresponding base metric (i.e. non-augmented variant). With DPMeS, the routing protocol is expected to yield better performance consistently compared to the fixed metric approach whose performance fluctuates amid changes in network setup and conditions. By and large, DSA-enabled WMN nodes will require access to some fixed spectrum to fall back on when opportunistic spectrum is unavailable. In the absence of fully functional integrated-chip cognitive radios to enable DSA, the immediate feasible solution for the interim is single hardware platforms fitted with multiple transceivers. This configuration results in multi-band multi-radio node capability that lends itself to a variety of link options in terms of transmit/receive radio functionality. The dissertation reports on the experimental performance evaluation of radios operating in the 5 GHz and UHF-TVWS bands for hybrid back-haul links. It is found that individual radios perform differently depending on the operating parameter settings, namely channel, channel-width and transmission power subject to prevailing environmental (both spectral and topographical) conditions. When aggregated, if the radios' data-rates are approximately equal, there is a throughput and round-trip time performance improvement of 44.5 - 61.8 % and 7.5 - 41.9 % respectively. For hybrid links comprising radios with significantly unequal data-rates, this study proposes an adaptive round-robin (ARR) based algorithm for efficient multilink utilisation. Numerical analysis indicate that ARR provides 75 % throughput improvement. These results indicate that network optimisation overall requires both time and frequency division duplexing. Based on the experimental test results, this dissertation presents a three-layered routing framework for multi-link utilisation. The top layer represents the nodes' logical interface to the WMN while the bottom layer corresponds to the underlying physical wireless network interface cards (WNIC). The middle layer is an abstract and reductive representation of the possible and available transmission, and reception options between node pairs, which depends on the number and type of WNICs. Drawing on the experimental results and insight gained, the study builds criteria towards a mechanism for auto selection of the optimal link option. Overall, this study is anticipated to serve as a springboard to stimulate the adoption and integration of DSA in WMNs, and further development in multi-link utilisation strategies to increase capacity. Ultimately, it is hoped that this contribution will collectively contribute effort towards attaining the global goal of extending connectivity to the unconnected

A Quantitative Analysis of Performance in a Multi-Protocol Ad Hoc 802.11b-based Wireless Local Network

The popularity of the Internet and the growing demand for ubiquitous connectivity accelerate the need for viable wireless local area network (WLAN) solutions. As a consequence, increasing number of manufacturers have adopted the Institute of Electrical and Electronic Engineers (IEEE) 802.11a/b/g set of WLAN standards and produced inexpensive wireless products to expand capabilities of existing LANs. IEEE 802.11 b wireless products are widely accepted. Mobile ad hoc networks, a variant of the 802.11 standards, exist without the requirement for a wired infrastructure or host to provide routing, connectivity, and maintenance services. Because of the high variability of environments in which ad hoc networks operate, numerous routing protocols are proposed. Research indicates that these protocols are unsuited for efficient operation in multiple environments. In this investigation, the author examined the effect of multiple protocols on throughput and end-to-end delay in simulated ad hoc networks. The author selected the ad hoc on-demand distance vector (AODV) and dynamic source routing (DSR) routing protocols for this research. The outcomes from the simulations conducted indicated increased end-to-end delay and reduced packet throughput as a result of the mixed populations of the AODV and DSR ad hoc routing protocols. The results also indicated that increasing node density and velocity improved packet throughput and reduced end-to-end delay