반향 환경에 강인한 음향 데이터 전송을 위한 오디오 정보 은닉 기법 연구

학위논문 (박사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2014. 2. 김남수.In this dissertation, audio data hiding methods suitable for acoustic data transmission are studied. Acoustic data transmission implies a technique which communicates data in short-range aerial space between a loudspeaker and a microphone. Audio data hiding method implies a technique that embeds message signals into audio such as music or speech. The audio signal with embedded message is played back by the loudspeaker at a transmitter and the signal is recorded by the microphone at a receiver without any additional communication devices. The data hiding methods for acoustic data transmission require a high level of robustness and data rate than those for other applications. For one of the conventional methods, the acoustic orthogonal frequency division multiplexing (AOFDM) technique was developed as a reliable communication with reasonable bit rate. The conventional methods including AOFDM, however, are considered deficient in transmission performance or audio quality. To overcome this limitation, the modulated complex lapped transform (MCLT) is introduced in the second chapter of the dissertation. The system using MCLT does not produce blocking artifacts which may degrade the quality of the resulting data-embedded audio signal. Moreover, the interference among adjacent coefficients due to the overlap property is analyzed to take advantage of it for data embedding and extraction. In the third chapter of the dissertation, a novel audio data hiding method for the acoustic data transmission using MCLT is proposed. In the proposed system, audio signal is transformed by the MCLT and the phases of the coefficients are modified to embed message based on the fact that human auditory perception is more sensitive to the variation in magnitude spectra. In the proposed method, the perceived quality of the data-embedded audio signal can be kept almost similar to that of the original audio while transmitting data at several hundreds of bits per second (bps). The experimental results have shown that the audio quality and transmission performance of proposed system are better than those of the AOFDM based system. Moreover, several techniques have been found to further improve the performance of the proposed acoustic data transmission system which are listed as follows: incorporating a masking threshold (MM), clustering based decoding (CLS), and a spectral magnitude adjustment (SMA). In the fourth chapter of the dissertation, an audio data hiding technique more suitable for acoustic data transmission in reverberant environments is proposed. In this approach, sophisticated techniques widely deployed in wireless communication is incorporated which can be summarized as follows: First, a proper range of MCLT length to cope with reverberant environments is analyzed based on the wireless communication theory. Second, a channel estimation technique based on the Wiener estimator to compensate the effect of channel is applied in conjunction with a suitable data packet structure. From the experimental result, the MCLT length longer than the reverberation time is found to be robust against the reverberant environments at the cost of the quality of the data-embedded audio. The experimental results have also shown that the proposed method is robust against various forms of attacks such as signal processing, overwriting, and malicious removal methods. However, it would be the most severe problem to find a proper window length which satisfies both the inaudible distortion and robust data transmission in the reverberant environments. For the phase modification of the audio signal, it would be highly likely to incur a significant quality degradation if the length of time-frequency transform is very long due to the pre-echo phenomena. In the fifth chapter, therefore, segmental SNR adjustment (SSA) technique is proposed to further modify the spectral components for attenuating the pre-echo. In the proposed SSA technique, segmenatal SNR is calculated from short-length MCLT analysis and its minimum value is limited to a desired value. The experimental results have shown that the SSA algorithm with a long MCLT length can attenuate the pre-echo effectively such that it can transmit data more reliably while preserving good audio quality. In addition, a good trade-off between the audio quality and transmission performance can be achieved by adjusting only a single parameter in the SSA algorithm. If the number of microphones is more than one, the diversity technique which takes advantage of transmitting duplicates through statistically independent channel could be useful to enhance the transmission reliability. In the sixth chapter, the acoustic data transmission technique is extended to take advantage of the multi-microphone scheme based on combining. In the combining-based multichannel method, the synchronization and channel estimation are respectively performed at each received signal and then the received signals are linearly combined so that the SNR is increased. The most noticeable property for combining-based technique is to provide compatibility with the acoustic data transmission system using a single microphone. From the series of the experiments, the proposed multichannel method have been found to be useful to enhance the transmission performance despite of the statistical dependency between the channels.Abstract i List of Figures ix List of Tables xv Chapter 1 Introduction 1 1.1 Audio Data Hiding and Acoustic Data Transmission 1 1.2 Previous Methods 4 1.2.1 Audio Watermarking Based Methods 4 1.2.2 Wireless Communication Based Methods 6 1.3 Performance Evaluation 9 1.3.1 Audio Quality 9 1.3.2 Data Transmission Performance 10 1.4 Outline of the Dissertation 10 Chapter 2 Modulated Complex Lapped Transform 13 2.1 Introduction 13 2.2 MCLT 14 2.3 Fast Computation Algorithm 18 2.4 Derivation of Interference Terms in MCLT 19 2.5 Summary 24 Chapter 3 Acoustic Data Transmission Based on MCLT 25 3.1 Introduction 25 3.2 Data Embedding 27 3.2.1 Message Frame 27 3.2.2 Synchronization Frame 29 3.2.3 Data Packet Structure 32 3.3 Data Extraction 32 3.4 Techniques for Performance Enhancement 33 3.4.1 Magnitude Modification Based on Frequency Masking 33 3.4.2 Clustering-based Decoding 35 3.4.3 Spectral Magnitude Adjustment Algorithm 37 3.5 Experimental Results 39 3.5.1 Comparison with Acoustic OFDM 39 3.5.2 Performance Improvements by Magnitude Modification and Clustering based Decoding 47 3.5.3 Performance Improvements by Spectral Magnitude Adjustment 50 3.6 Summary 52 Chapter 4 Robust Acoustic Data Transmission against Reverberant Environments 55 4.1 Introduction 55 4.2 Data Embedding 56 4.2.1 Data Embedding 57 4.2.2 MCLT Length 58 4.2.3 Data Packet Structure 60 4.3 Data Extraction 61 4.3.1 Synchronization 61 4.3.2 Channel Estimation and Compensation 62 4.3.3 Data Decoding 65 4.4 Experimental Results 66 4.4.1 Robustness to Reverberation 69 4.4.2 Audio Quality 71 4.4.3 Robustness to Doppler Effect 71 4.4.4 Robustness to Attacks 71 4.5 Summary 75 Chapter 5 Segmental SNR Adjustment for Audio Quality Enhancement 77 5.1 Introduction 77 5.2 Segmental SNR Adjustment Algorithm 79 5.3 Experimental Results 83 5.3.1 System Configurations 83 5.3.2 Audio Quality Test 84 5.3.3 Robustness to Attacks 86 5.3.4 Transmission Performance of Recorded Signals in Indoor Environment 87 5.3.5 Error correction using convolutional coding 89 5.4 Summary 91 Chapter 6 Multichannel Acoustic Data Transmission 93 6.1 Introduction 93 6.2 Multichannel Techniques for Robust Data Transmission 94 6.2.1 Diversity Techniques for Multichannel System 94 6.2.2 Combining-based Multichannel Acoustic Data Transmission 98 6.3 Experimental Results 100 6.3.1 Room Environments 101 6.3.2 Transmission Performance of Simulated Environments 102 6.3.3 Transmission Performance of Recorded Signals in Reverberant Environment 105 6.4 Summary 106 Chapter 7 Conclusions 109 Bibliography 113 국문초록 121Docto

Indoor Sound Based Localization: Research Questions and First Results

Part 17: TelecommunicationsInternational audienceThis PhD work has the goal to develop an inexpensive, easily deployable and widely compatible localization system for indoor use, suitable for pre-installed public address sound systems, avoiding costly installations or significant architectural changes in spaces. Using the audible sound range will allow the use of low cost off-the-shelf equipment suitable for keeping a low deployment cost. The state-of-the-art presented in this paper evidences a technological void in low-cost, reliable and precise localization systems and technologies. This necessity was also confirmed by the authors in a previous project (NAVMETRO®) where no suitable technological solution was found to exist to overcome the need to automatically localize people in a public space in a reliable and precise way.Although research work is in its first steps, it already provides a thorough view on the problem while discussing some possible approaches and predicting strategies to overcome the key difficulties. Some experiments were already conducted validating some initial premises and demonstrating how to measure the signal’s time-of-flight necessary to infer on distance calculations

Feature-based classification for audio bootlegs detection

n/

Effects of errorless learning on the acquisition of velopharyngeal movement control

Session 1pSC - Speech Communication: Cross-Linguistic Studies of Speech Sound Learning of the Languages of Hong Kong (Poster Session)The implicit motor learning literature suggests a benefit for learning if errors are minimized during practice. This study investigated whether the same principle holds for learning velopharyngeal movement control. Normal speaking participants learned to produce hypernasal speech in either an errorless learning condition (in which the possibility for errors was limited) or an errorful learning condition (in which the possibility for errors was not limited). Nasality level of the participants’ speech was measured by nasometer and reflected by nasalance scores (in %). Errorless learners practiced producing hypernasal speech with a threshold nasalance score of 10% at the beginning, which gradually increased to a threshold of 50% at the end. The same set of threshold targets were presented to errorful learners but in a reversed order. Errors were defined by the proportion of speech with a nasalance score below the threshold. The results showed that, relative to errorful learners, errorless learners displayed fewer errors (50.7% vs. 17.7%) and a higher mean nasalance score (31.3% vs. 46.7%) during the acquisition phase. Furthermore, errorless learners outperformed errorful learners in both retention and novel transfer tests. Acknowledgment: Supported by The University of Hong Kong Strategic Research Theme for Sciences of Learning © 2012 Acoustical Society of Americapublished_or_final_versio

A study on number theoretic construction and prediction of two dimensional acoustic diffusers for architectural applications

Thesis (Doctoral)--İzmir Institute of Technology, Architecture, İzmir, 2011Includes bibliographical references (leaves: 72-77)Text in English; Abstract: Turkish and Englishxiv, 172 leavesDefined as the scattering of sound independent from angle, optimum diffusion is very important for the perception of musical sound. For this purpose, Schroeder used mathematical number sequences to propose ʼreflection phase grating diffusersʼ, of two main types: Single plane or one-dimensional (1D) diffusers that scatter sound into a hemi-disc, and two dimensional (2D) diffusers that scatter into a hemisphere to disperse strong specular reflections without removing sound energy from the space, which is the main advantage of these devices. Currently, two methods are used to design 2D diffusers:Product Array and Folding Array Methods. Both are based on number theory and used methodologically in the field of acoustics, producing results that offer limited diffusion characteristics and design solutions for a variety of architectural spaces ranging from concert halls to recording studios where Schroeder diffusers are widely used. This dissertation proposes Distinct Sums Property Method originally devised for watermarking digital images, to construct adoptable 2D diffusers through number theoretical construction and prediction. At first, quadratic residue sequence based on prime number 7 is selected according to its autocorrelation properties as the Fourier transform of good autocorrelation properties gives an even scattered energy distribution. Then Distinct Sums Property Method is applied to construct 2D arrays from this sequence from which well depths and widths are calculated. Third, the aimed scattering and diffusion properties of the modeled 2D diffuser are predicted by Boundary Element Method which gives approximate results in accordance with the measurements based on Audio Engineering Society Standards. Fourth, polar responses (i.e. the scattering diagrams for specific angles) in each octave band frequency are obtained. Finally, predicted diffusion coefficients for uniform scattering are calculated and compared to the reference flat surfaceʼs coefficients and previous studieʼs results