1,556 research outputs found
Recommended from our members
Two novel nonlinear companding schemes with iterative receiver to reduce PAPR in multi-carrier modulation systems
Companding transform is an efficient and simple method to reduce the Peak-to-Average Power Ratio (PAPR) for Multi-Carrier Modulation (MCM) systems. But if the MCM signal is only simply operated by inverse companding transform at the receiver, the resultant spectrum may exhibit severe in-band and out-of-band radiation of the distortion components, and considerable peak regrowth by excessive channel noises etc. In order to prevent these problems from occurring, in this paper, two novel nonlinear companding schemes with a iterative receiver are proposed to reduce the PAPR. By transforming the amplitude or power of the original MCM signals into uniform distributed signals, the novel schemes can effectively reduce PAPR for different modulation formats and sub-carrier sizes. Despite moderate complexity increasing at the receiver, but it is especially suitable to be combined with iterative channel estimation. Computer simulation results show that the proposed schemes can offer good system performances without any bandwidth expansion
Feasibility of In-band Full-Duplex Radio Transceivers with Imperfect RF Components: Analysis and Enhanced Cancellation Algorithms
In this paper we provide an overview regarding the feasibility of in-band
full-duplex transceivers under imperfect RF components. We utilize results and
findings from the recent research on full-duplex communications, while
introducing also transmitter-induced thermal noise into the analysis. This
means that the model of the RF impairments used in this paper is the most
comprehensive thus far. By assuming realistic parameter values for the
different transceiver components, it is shown that IQ imaging and
transmitter-induced nonlinearities are the most significant sources of
distortion in in-band full-duplex transceivers, in addition to linear
self-interference. Motivated by this, we propose a novel augmented nonlinear
digital self-interference canceller that is able to model and hence suppress
all the essential transmitter imperfections jointly. This is also verified and
demonstrated by extensive waveform simulations.Comment: 7 pages, presented in the CROWNCOM 2014 conferenc
Simultaneous Transmission and Reception: Algorithm, Design and System Level Performance
Full Duplex or Simultaneous transmission and reception (STR) in the same
frequency at the same time can potentially double the physical layer capacity.
However, high power transmit signal will appear at receive chain as echoes with
powers much higher than the desired received signal. Therefore, in order to
achieve the potential gain, it is imperative to cancel these echoes. As these
high power echoes can saturate low noise amplifier (LNA) and also digital
domain echo cancellation requires unrealistically high resolution
analog-to-digital converter (ADC), the echoes should be cancelled or suppressed
sufficiently before LNA. In this paper we present a closed-loop echo
cancellation technique which can be implemented purely in analogue domain. The
advantages of our method are multiple-fold: it is robust to phase noise, does
not require additional set of antennas, can be applied to wideband signals and
the performance is irrelevant to radio frequency (RF) impairments in transmit
chain. Next, we study a few protocols for STR systems in carrier sense multiple
access (CSMA) network and investigate MAC level throughput with realistic
assumptions in both single cell and multiple cells. We show that STR can reduce
hidden node problem in CSMA network and produce gains of up to 279% in maximum
throughput in such networks. Finally, we investigate the application of STR in
cellular systems and study two new unique interferences introduced to the
system due to STR, namely BS-BS interference and UE-UE interference. We show
that these two new interferences will hugely degrade system performance if not
treated appropriately. We propose novel methods to reduce both interferences
and investigate the performances in system level.Comment: 20 pages. This manuscript will appear in the IEEE Transactions on
Wireless Communication
Full-Duplex Relaying in MIMO-OFDM Frequency-Selective Channels with Optimal Adaptive Filtering
In-band full-duplex transmission allows a relay station to theoretically
double its spectral efficiency by simultaneously receiving and transmitting in
the same frequency band, when compared to the traditional half-duplex or
out-of-band full-duplex counterpart. Consequently, the induced
self-interference suffered by the relay may reach considerable power levels,
which decreases the signal-to-interference-plus-noise ratio (SINR) in a
decode-and-forward (DF) relay, leading to a degradation of the relay
performance. This paper presents a technique to cope with the problem of
self-interference in broadband multiple-input multiple-output (MIMO) relays.
The proposed method uses a time-domain cancellation in a DF relay, where a
replica of the interfering signal is created with the help of a recursive least
squares (RLS) algorithm that estimates the interference frequency-selective
channel. Its convergence mean time is shown to be negligible by simulation
results, when compared to the length of a typical orthogonal-frequency division
multiplexing (OFDM) sequences. Moreover, the bit-error-rate (BER) and the SINR
in a OFDM transmission are evaluated, confirming that the proposed method
extends significantly the range of self-interference power to which the relay
is resilient to, when compared with other mitigation schemes
Photonics-assisted analog wideband self-interference cancellation for in-band full-duplex MIMO systems with adaptive digital amplitude and delay pre-matching
A photonics-assisted analog wideband RF self-interference (SI) cancellation
and frequency downconversion approach for in-band full-duplex (IBFD)
multiple-input multiple-output (MIMO) systems with adaptive digital amplitude
and delay pre-matching is proposed based on a dual-parallel Mach-Zehnder
modulator (DP-MZM). In each MIMO receiving antenna, the received signal,
including different SI signals from different transmitting antennas and the
signal of interest, is applied to one arm of the upper dual-drive Mach-ehnder
modulator (DD-MZM) of the DP-MZM, the reference signal is applied to the other
arm of the upper DD-MZM, and the local oscillator signal is applied to the
lower DD-MZM. The SI signals are canceled in the optical domain in the upper
DD-MZM and the frequency downconversion is achieved after photodetection. To
cancel the SI signals, the reference signal is constructed in the digital
domain, while the amplitude and delay of the constructed reference are adjusted
digitally by upsampling with high accuracy. Experiments are performed when two
different SI signals are employed. The genetic algorithm and least-squares
algorithm are combined with segmented searching respectively for the SI signal
reconstruction and amplitude and delay pre-matching. A cancellation depth of
around 20 dB is achieved for the 1-Gbaud 16 quadrature-amplitude modulation
orthogonal frequency-division multiplexing signal.Comment: 25 pages, 17 figure
- …