Low‐latency Java communication devices on RDMA‐enabled networks

This is the peer reviewed version of the following article: Expósito, R. R., Taboada, G. L., Ramos, S., Touriño, J., & Doallo, R. (2015). Low‐latency Java communication devices on RDMA‐enabled networks. Concurrency and Computation: Practice and Experience, 27(17), 4852-4879., which has been published in final form at https://doi.org/10.1002/cpe.3473. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions.[Abstract] Providing high‐performance inter‐node communication is a key capability for running high performance computing applications efficiently on parallel architectures. In fact, current systems deployments are aggregating a significant number of cores interconnected via advanced networking hardware with Remote Direct Memory Access (RDMA) mechanisms, that enable zero‐copy and kernel‐bypass features. The use of Java for parallel programming is becoming more promising thanks to some useful characteristics of this language, particularly its built‐in multithreading support, portability, easy‐to‐learn properties, and high productivity, along with the continuous increase in the performance of the Java virtual machine. However, current parallel Java applications generally suffer from inefficient communication middleware, mainly based on protocols with high communication overhead that do not take full advantage of RDMA‐enabled networks. This paper presents efficient low‐level Java communication devices that overcome these constraints by fully exploiting the underlying RDMA hardware, providing low‐latency and high‐bandwidth communications for parallel Java applications. The performance evaluation conducted on representative RDMA networks and parallel systems has shown significant point‐to‐point performance increases compared with previous Java communication middleware, allowing to obtain up to 40% improvement in application‐level performance on 4096 cores of a Cray XE6 supercomputer.Ministerio de Economía y Competitividad; TIN2013-42148-PXunta de Galicia; GRC2013/055Ministerio de Educación y Ciencia; AP2010-434

F-MPJ: scalable Java message-passing communications on parallel systems

This is a post-peer-review, pre-copyedit version of an article published in The Journal of Supercomputing. The final authenticated version is available online at: https://doi.org/10.1007/s11227-009-0270-0[Abstract] This paper presents F-MPJ (Fast MPJ), a scalable and efficient Message-Passing in Java (MPJ) communication middleware for parallel computing. The increasing interest in Java as the programming language of the multi-core era demands scalable performance on hybrid architectures (with both shared and distributed memory spaces). However, current Java communication middleware lacks efficient communication support. F-MPJ boosts this situation by: (1) providing efficient non-blocking communication, which allows communication overlapping and thus scalable performance; (2) taking advantage of shared memory systems and high-performance networks through the use of our high-performance Java sockets implementation (named JFS, Java Fast Sockets); (3) avoiding the use of communication buffers; and (4) optimizing MPJ collective primitives. Thus, F-MPJ significantly improves the scalability of current MPJ implementations. A performance evaluation on an InfiniBand multi-core cluster has shown that F-MPJ communication primitives outperform representative MPJ libraries up to 60 times. Furthermore, the use of F-MPJ in communication-intensive MPJ codes has increased their performance up to seven times.Ministerio de Educación y Ciencia; TIN2004-07797-C02Ministerio de Educación y Ciencia; TIN2007-67537-C03-2Xunta de Galicia; PGIDIT06PXIB105228P

Light-Weight Remote Communication for High-Performance Cloud Networks

Während der letzten 10 Jahre gewann das Cloud Computing immer weiter an Bedeutung. Um kosten zu sparen installieren immer mehr Anwender ihre Anwendungen in der Cloud, statt eigene Hardware zu kaufen und zu betreiben. Als Reaktion entstanden große Rechenzentren, die ihren Kunden Rechnerkapazität zum Betreiben eigener Anwendungen zu günstigen Preisen anbieten. Diese Rechenzentren verwenden momentan gewöhnliche Rechnerhardware, die zwar leistungsstark ist, aber hohe Anschaffungs- und Stromkosten verursacht. Aus diesem Grund werden momentan neue Hardwarearchitekturen mit schwächeren aber energieeffizienteren CPUs entwickelt. Wir glauben, dass in zukünftiger Cloudhardware außerdem Netzwerkhardware mit Zusatzfunktionen wie user-level I/O oder remote DMA zum Einsatz kommt, um die CPUs zu entlasten. Aktuelle Cloud-Plattformen setzen meist bekannte Betriebssysteme wie Linux oder Microsoft Windows ein, um Kompatibilität mit existierender Software zu gewährleisten. Diese Betriebssysteme beinhalten oft keine Unterstützung für die speziellen Funktionen zukünftiger Netzwerkhardware. Stattdessen verwenden sie traditionell software-basierte Netzwerkstacks, die auf TCP/IP und dem Berkeley-Socket-Interface basieren. Besonders das Socket-Interface ist mit Funktionen wie remote DMA weitgehend inkompatibel, da seine Semantik auf Datenströmen basiert, während remote DMA-Anfragen sich eher wie in sich abgeschlossene Nachrichten verhalten. In der vorliegenden Arbeit beschreiben wir LibRIPC, eine leichtgewichtige Kommunikationsbibliothek für Cloud-Anwendungen. LibRIPC verbessert die Leistung zukünftiger Netzwerkhardware signifikant, ohne dabei die von Anwendungen benötigte Flexibilität zu vernachlässigen. Anstatt Sockets bietet LibRIPC eine nachrichtenbasierte Schnittstelle an, zwei Funktionen zum senden von Daten implementiert: Eine Funktion für kurze Nachrichten, die auf niedrige Latenz optimiert ist, sowie eine Funktion für lange Nachrichten, die durch die Nutzung von remote DMA-Funktionalität hohe Datendurchsätze erreicht. Übertragene Daten werden weder beim Senden noch beim Empfangen kopiert, um die Übertragungslatenz zu minimieren. LibRIPC nutzt den vollen Funktionsumfang der Hardware aus, versteckt die Hardwarefunktionen aber gleichzeitig vor der Anwendung, um die Hardwareunabhängigkeit der Anwendung zu gewährleisten. Um Flexibilität zu erreichen verwendet die Bibliothek ein eigenes Adressschema, dass sowohl von der verwendeten Hardware als auch von physischen Maschinen unabhängig ist. Hardwareabhängige Adressen werden dynamisch zur Laufzeit aufgelöst, was starten, stoppen und migrieren von Prozessen zu beliebigen Zeitpunkten erlaubt. Um unsere Lösung zu Bewerten implementierten wir einen Prototypen auf Basis von InfiniBand. Dieser Prototyp nutzt die Vorteile von InfiniBand, um effiziente Datenübertragungen zu ermöglichen, und vermeidet gleichzeitig die Nachteile von InfiniBand, indem er die Ergebnisse langwieriger Operationen speichert und wiederverwendet. Wir führten Experimente auf Basis dieses Prototypen und des Webservers Jetty durch. Zu diesem Zweck integrierten wir Jetty in das Hadoop map/reduce framework, um realistische Lastbedingungen zu erzeugen. Während dabei die effiziente Integration von LibRIPC und Jetty vergleichsweise einfach war, erwies sich die Integration von LibRIPC und Hadoop als deutlich schwieriger: Um unnötiges Kopieren von Daten zu vermeiden, währen weitgehende Änderungen an der Codebasis von Hadoop erforderlich. Dennoch legen unsere Ergebnisse nahe, dass LibRIPC Datendurchsatz, Latenz und Overhead gegenüber Socketbasierter Kommunikation deutlich verbessert

RAS enhancements for RDMA communications

textEthernet as the communication medium in the enterprise data center has outlived all competing mediums and resisted the test of time with regards to speed and costs. The future is also poised for growth with 40 and 100Gps speeds just over horizon. The current state of the technology is being enhanced and extended with lossless features to allow for fabric convergence of Storage and Inter Process Communication (IPC) Networks. It is under this medium that an increase in the adoption of Remote Direct Memory Access (RDMA) over Ethernet using offloaded TCP/IP (iWARP) and Infiniband over Ethernet (RoCE) communication stacks to RDMA capable NIC adapter s (RNIC) is observed. RDMA enables direct application to application communication over the network resulting in numerous and significant benefits such as reduced CPU utilization, lower latency communications, increased energy efficiency, and reduced overall system requirements. However, with said benefits also comes increased software complexity in how RDMA interface users communicate. The RDMA communication semantics, which originate from the HPC domain, are heavily biased towards Low-Latency and High-Bandwidth communications rather than Reliability, Availability, and Serviceability (RAS). As adoption increases, and enterprise data centers begins to leverage RDMA over Ethernet, enhancements to the OS stack software architecture and design of the components involved is required to address these deficiencies. Operating system interfaces, device drivers, adapter hardware design, and embedded firmware features must be viewed from a high-availability and maintainability point of view. RAS enhancements for RDMA communications proposes the software architectural tradeoffs for enhancing the iWARP and RoCE RDMA implementations for communications in the enterprise data center, with new and traditional RAS features for existing communications stacks and devices. The architecture leverages software enhancements in traceability, availability, maintainability, serviceability, fault-isolation and resource management; such that in the advent of errors, the probability that the forensics data points to identify root cause are immediately and automatically available is increased.Electrical and Computer Engineerin

Accelerating Network Communication and I/O in Scientific High Performance Computing Environments

High performance computing has become one of the major drivers behind technology inventions and science discoveries. Originally driven through the increase of operating frequencies and technology scaling, a recent slowdown in this evolution has led to the development of multi-core architectures, which are supported by accelerator devices such as graphics processing units (GPUs). With the upcoming exascale era, the overall power consumption and the gap between compute capabilities and I/O bandwidth have become major challenges. Nowadays, the system performance is dominated by the time spent in communication and I/O, which highly depends on the capabilities of the network interface. In order to cope with the extreme concurrency and heterogeneity of future systems, the software ecosystem of the interconnect needs to be carefully tuned to excel in reliability, programmability, and usability. This work identifies and addresses three major gaps in today's interconnect software systems. The I/O gap describes the disparity in operating speeds between the computing capabilities and second storage tiers. The communication gap is introduced through the communication overhead needed to synchronize distributed large-scale applications and the mixed workload. The last gap is the so called concurrency gap, which is introduced through the extreme concurrency and the inflicted learning curve posed to scientific application developers to exploit the hardware capabilities. The first contribution is the introduction of the network-attached accelerator approach, which moves accelerators into a "stand-alone" cluster connected through the Extoll interconnect. The novel communication architecture enables the direct accelerators communication without any host interactions and an optimal application-to-compute-resources mapping. The effectiveness of this approach is evaluated for two classes of accelerators: Intel Xeon Phi coprocessors and NVIDIA GPUs. The next contribution comprises the design, implementation, and evaluation of the support of legacy codes and protocols over the Extoll interconnect technology. By providing TCP/IP protocol support over Extoll, it is shown that the performance benefits of the interconnect can be fully leveraged by a broader range of applications, including the seamless support of legacy codes. The third contribution is twofold. First, a comprehensive analysis of the Lustre networking protocol semantics and interfaces is presented. Afterwards, these insights are utilized to map the LNET protocol semantics onto the Extoll networking technology. The result is a fully functional Lustre network driver for Extoll. An initial performance evaluation demonstrates promising bandwidth and message rate results. The last contribution comprises the design, implementation, and evaluation of two easy-to-use load balancing frameworks, which transparently distribute the I/O workload across all available storage system components. The solutions maximize the parallelization and throughput of file I/O. The frameworks are evaluated on the Titan supercomputing systems for three I/O interfaces. For example for large-scale application runs, POSIX I/O and MPI-IO can be improved by up to 50% on a per job basis, while HDF5 shows performance improvements of up to 32%

Performance Analysis Of Pde Based Parallel Algorithms On Different Computer Architectures

Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Bilişim Enstitüsü, 2009Thesis (M.Sc.) -- İstanbul Technical University, Institute of Informatics, 2009Son yıllarda dağıtık algoritmaların farklı platformlarda kullanılabilmesi platform ve uygulama bağımsız performans analizi uygulamaları ihtiyacını arttırmıştır. Farklı donanımları ve haberleşme metodlarını destekleyen uygulamalar kullanıcılara donanım ve yazılımdan bağımsız ortak bir zemin hazırladıkları için kolaylık sağlamaktadır. Kısmi fark denklemleri hesaplamalı bilim ve mühendisliğin bir çok alanında kullanılmaktadır (ısı, dalga yayılımı gibi). Bu denklemlerin sayısal çözümü yinelemeli yöntemler kullanılarak yapılmaktadır. Problemin boyutu ve hata değerine göre çözüme ulaşmak için gereken yineleme sayısı ve buna bağlı olarak süresi değişmektedir. Kısmi fark denklemelerinin tek işlemcili bilgisayarlardaki çözümü uzun sürdüğü ve yüksek boyutlarda hafızaları yetersiz kaldığı için paralelleştirilerek birden fazla bilgisayarın işlemcisi ve hafızası kullanılarak çözülmektedir. Tezimde eliptik kısmi fark denklemlerini Gauss-Seidel ve Successive Over-Relaxation (SOR) metodlarını kullanarak çözen paralel algoritmalar kullanılmıştır. Performans analizi ve eniyilemesi kabaca üç adımdan oluşmaktadır; ölçüm, sonuçların analizi, darboğazların tespit edilip yazılımda iyileştirme yapılması. Ölçüm aşamasında programın koşarken ürettiği performans bilgisi toplanır, toplanan bu veriler görselleştirme araçları ile anlaşılır hale getirilerek yorumlanır. Yorumlama aşamasında tespit edilen dar boğazlar belirlenir ve giderilme yöntemleri araştırılır. Gerekli iyileştirmeler yapılarak program yeniden analiz edilir. Bu aşamaların her birinde farklı uygulamalar kullanılabilir fakat tez çalışmamda uygulamaları tek çatı altında toplayan TAU kullanılmıştır. TAU (Tuning and Analysis Utilities) farklı donanımları ve işletim sistemlerini destekleyerek farklı paralelleştirme metodlarını analiz edebilmektedir. Açık kaynak kodlu olan TAU diğer açık kaynak kodlu uygulamalar ile uyumlu olup birçok seviyede bütünleşme sağlanmıştır. Bu tez çalışmasında, iki farklı platformda aynı uygulamanın performans analizi yapılarak platform farkının getirdiği farklılıklar incelenmektedir. Performans analizinde bir algoritmanın eniyilemesini yapmak için genel bir kural olmadığından her algoritma her platformda incelenerek gerekli değişiklikler yapılmalıdır. Bu bağlamda kullandığım PDE algoritmasının her iki sistemdeki analizi sonucu elde edilen bilgiler yorumlanmıştır.In last two decades, use of parallel algorithms on different architectures increased the need of architecture and application independent performance analysis tools. Tools that support different communication methods and hardware prepare a common ground regardless of equipments provided. Partial differential equations (PDE) are used in several applications (such as propagation of heat, wave) in computational science and engineering. These equations can be solved using iterative numerical methods. Problem size and error tolerance effects iteration count and computation time to solve equation. PDE computations take long time using single processor computers with sequential algorithms, and if data size gets bigger single processors memory may be insufficient. Thus, PDE?s are solved using parallel algorithms on multiple processors. In this thesis, elliptic partial differential equation is solved using Gauss-Seidel and Successive Over-Relaxation (SOR) methods parallel algorithms. Performance analysis and optimization basically has three steps; evaluation, analysis of gathered information, defining and optimizing bottlenecks. In evaluation, performance information is gathered while program runs, then observations are made on gathered information by using visualization tools. Bottlenecks are defined and optimization techniques are researched. Necessary improvements are made to analyze the program again. Different applications in each of these stages can be used but in this thesis TAU is used, which collects these applications under one roof. TAU (Tuning and Analysis Utilities) supports many hardware, operating systems and parallelization methods. TAU is an open source application and collaborates with other open source applications at different levels. In this thesis, differences based on performance analysis of an algorithm in different two architectures are investigated. In performance analysis and optimization there is no golden rule to speed up algorithm. Each algorithm must be analyzed on that specific architecture. In this context, the performance analysis of a PDE algorithm on two architectures has been interpreted.Yüksek LisansM.Sc

Design of efficient Java communications for high performance computing

[Abstract] There is an increasing interest to adopt Java as the parallel programming language for the multi-core era. Although Java offers important advantages, such as built-in multithreading and networking support, productivity and portability, the lack of efficient communication middleware is an important drawback for its uptake in High Performance Computing (HPC). This PhD Thesis presents the design, implementation and evaluation of several solutions to improve this situation: (1) a high performance Java sockets implementation (JFS, Java Fast Sockets) on high-speed networks (e.g., Myrinet, InfiniBand) and shared memory (e.g., multi-core) machines; (2) a low-level messaging device, iodev, which efficiently overlaps communication and computation; and (3) a more scalable Java message-passing library, Fast MPJ (F-MPJ). Furthermore, new Java parallel benchmarks have been implemented and used for the performance evaluation of the developed middleware. The final and main conclusion is that the use of Java for HPC is feasible and even advisable when looking for productive development, provided that efficient communication middleware is made available, such as the projects presented in this Thesis.[Resumen] La tesis doctoral "Design of Efficient Java Communications for High Performance Computing" parte de la hipótesis inicial de que es posible desarrollar aplicaciones Java en computación de altas prestaciones, un ámbito en el que el rendimiento es crucial, siempre que esté disponible un middleware de comunicación eficiente. Así, se han diseñado, desarrollado y evaluado diferentes bibliotecas de comunicación en Java, desde el nivel de sockets al de paso de mensajes, obteniendo notables incrementos de eficiencia, confirmando que la hipótesis inicial es factible

A Design Space for Distributed Producer-Consumer Data Structures Using RDMA

Remote Direct Memory Access (RDMA) has become a standard networking technology and is prominently used in high-performance applications. While RDMA can provide both excellent performance and novel capabilities, it can be more difficult than traditional kernel-supported networking to use effectively. RDMA adoption can be simplified through the use of abstractions that target broad classes of applications. In this thesis, we propose flow structures as an abstraction targeting distributed applications in which data need to flow directly between producers and consumers. Flow structures are asymmetric distributed producer/consumer data structures in which some servers only produce and others only consume. We present a design space for RDMA implementations of flow structures and illustrate the space using several concrete implementations of a simple flow structure: a FIFO queue. Finally, we present an empirical study that illustrates the design tradeoffs along the dimensions of the design space, and that shows that flow structures abstractions can capture the performance advantages of RDMA while making it much easier to use

Design and Evaluation of Low-Latency Communication Middleware on High Performance Computing Systems

[Resumen]El interés en Java para computación paralela está motivado por sus interesantes características, tales como su soporte multithread, portabilidad, facilidad de aprendizaje,alta productividad y el aumento significativo en su rendimiento omputacional. No obstante, las aplicaciones paralelas en Java carecen generalmente de mecanismos de comunicación eficientes, los cuales utilizan a menudo protocolos basados en sockets incapaces de obtener el máximo provecho de las redes de baja latencia, obstaculizando la adopción de Java en computación de altas prestaciones (High Per- formance Computing, HPC). Esta Tesis Doctoral presenta el diseño, implementación y evaluación de soluciones de comunicación en Java que superan esta limitación. En consecuencia, se desarrollaron múltiples dispositivos de comunicación a bajo nivel para paso de mensajes en Java (Message-Passing in Java, MPJ) que aprovechan al máximo el hardware de red subyacente mediante operaciones de acceso directo a memoria remota que proporcionan comunicaciones de baja latencia. También se incluye una biblioteca de paso de mensajes en Java totalmente funcional, FastMPJ, en la cual se integraron los dispositivos de comunicación. La evaluación experimental ha mostrado que las primitivas de comunicación de FastMPJ son competitivas en comparación con bibliotecas nativas, aumentando significativamente la escalabilidad de aplicaciones MPJ. Por otro lado, esta Tesis analiza el potencial de la computación en la nube (cloud computing) para HPC, donde el modelo de distribución de infraestructura como servicio (Infrastructure as a Service, IaaS) emerge como una alternativa viable a los sistemas HPC tradicionales. La evaluación del rendimiento de recursos cloud específicos para HPC del proveedor líder, Amazon EC2, ha puesto de manifiesto el impacto significativo que la virtualización impone en la red, impidiendo mover las aplicaciones intensivas en comunicaciones a la nube. La clave reside en un soporte de virtualización apropiado, como el acceso directo al hardware de red, junto con las directrices para la optimización del rendimiento sugeridas en esta Tesis.[Resumo]O interese en Java para computación paralela está motivado polas súas interesantes características, tales como o seu apoio multithread, portabilidade, facilidade de aprendizaxe, alta produtividade e o aumento signi cativo no seu rendemento computacional. No entanto, as aplicacións paralelas en Java carecen xeralmente de mecanismos de comunicación e cientes, os cales adoitan usar protocolos baseados en sockets que son incapaces de obter o máximo proveito das redes de baixa latencia, obstaculizando a adopción de Java na computación de altas prestacións (High Performance Computing, HPC). Esta Tese de Doutoramento presenta o deseño, implementaci ón e avaliación de solucións de comunicación en Java que superan esta limitación. En consecuencia, desenvolvéronse múltiples dispositivos de comunicación a baixo nivel para paso de mensaxes en Java (Message-Passing in Java, MPJ) que aproveitan ao máaximo o hardware de rede subxacente mediante operacións de acceso directo a memoria remota que proporcionan comunicacións de baixa latencia. Tamén se inclúe unha biblioteca de paso de mensaxes en Java totalmente funcional, FastMPJ, na cal foron integrados os dispositivos de comunicación. A avaliación experimental amosou que as primitivas de comunicación de FastMPJ son competitivas en comparación con bibliotecas nativas, aumentando signi cativamente a escalabilidade de aplicacións MPJ. Por outra banda, esta Tese analiza o potencial da computación na nube (cloud computing) para HPC, onde o modelo de distribución de infraestrutura como servizo (Infrastructure as a Service, IaaS) xorde como unha alternativa viable aos sistemas HPC tradicionais. A ampla avaliación do rendemento de recursos cloud específi cos para HPC do proveedor líder, Amazon EC2, puxo de manifesto o impacto signi ficativo que a virtualización impón na rede, impedindo mover as aplicacións intensivas en comunicacións á nube. A clave atópase no soporte de virtualización apropiado, como o acceso directo ao hardware de rede, xunto coas directrices para a optimización do rendemento suxeridas nesta Tese.[Abstract]The use of Java for parallel computing is becoming more promising owing to its appealing features, particularly its multithreading support, portability, easy-tolearn properties, high programming productivity and the noticeable improvement in its computational performance. However, parallel Java applications generally su er from inefficient communication middleware, most of which use socket-based protocols that are unable to take full advantage of high-speed networks, hindering the adoption of Java in the High Performance Computing (HPC) area. This PhD Thesis presents the design, development and evaluation of scalable Java communication solutions that overcome these constraints. Hence, we have implemented several lowlevel message-passing devices that fully exploit the underlying network hardware while taking advantage of Remote Direct Memory Access (RDMA) operations to provide low-latency communications. Moreover, we have developed a productionquality Java message-passing middleware, FastMPJ, in which the devices have been integrated seamlessly, thus allowing the productive development of Message-Passing in Java (MPJ) applications. The performance evaluation has shown that FastMPJ communication primitives are competitive with native message-passing libraries, improving signi cantly the scalability of MPJ applications. Furthermore, this Thesis has analyzed the potential of cloud computing towards spreading the outreach of HPC, where Infrastructure as a Service (IaaS) o erings have emerged as a feasible alternative to traditional HPC systems. Several cloud resources from the leading IaaS provider, Amazon EC2, which speci cally target HPC workloads, have been thoroughly assessed. The experimental results have shown the signi cant impact that virtualized environments still have on network performance, which hampers porting communication-intensive codes to the cloud. The key is the availability of the proper virtualization support, such as the direct access to the network hardware, along with the guidelines for performance optimization suggested in this Thesis

Improvement in the distribution of services in multi-agent systems with SCODA

The distribution of services on multi-agent systems allows it to reduce to the agents their computational load. The functionality of the system does not reside in the agents themselves, however it is ubiquitously distributed so that allows you to perform tasks in parallel avoiding an additional computational cost to the elements in the system. The distribution of services that offers SCODA (Distributed and Specialized Agent Communities) allows an intelligent management of these services provided by agents of the system and the parallel execution of threads that allow to respond to requests asynchronously, which implies an improvement in the performance of the system at both the computational level as the level of quality of service in the control of these services. The comparison carried out in the case of study that is presented in this paper demonstrates the existing improvement in the distribution of services on systems based on SCODA