Area/latency optimized early output asynchronous full adders and relative-timed ripple carry adders

This article presents two area/latency optimized gate level asynchronous full adder designs which correspond to early output logic. The proposed full adders are constructed using the delay-insensitive dual-rail code and adhere to the four-phase return-to-zero handshaking. For an asynchronous ripple carry adder (RCA) constructed using the proposed early output full adders, the relative-timing assumption becomes necessary and the inherent advantages of the relative-timed RCA are: (1) computation with valid inputs, i.e., forward latency is data-dependent, and (2) computation with spacer inputs involves a bare minimum constant reverse latency of just one full adder delay, thus resulting in the optimal cycle time. With respect to different 32-bit RCA implementations, and in comparison with the optimized strong-indication, weak-indication, and early output full adder designs, one of the proposed early output full adders achieves respective reductions in latency by 67.8, 12.3 and 6.1 %, while the other proposed early output full adder achieves corresponding reductions in area by 32.6, 24.6 and 6.9 %, with practically no power penalty. Further, the proposed early output full adders based asynchronous RCAs enable minimum reductions in cycle time by 83.4, 15, and 8.8 % when considering carry-propagation over the entire RCA width of 32-bits, and maximum reductions in cycle time by 97.5, 27.4, and 22.4 % for the consideration of a typical carry chain length of 4 full adder stages, when compared to the least of the cycle time estimates of various strong-indication, weak-indication, and early output asynchronous RCAs of similar size. All the asynchronous full adders and RCAs were realized using standard cells in a semi-custom design fashion based on a 32/28 nm CMOS process technology

Multi-resource approach to asynchronous SoC : design and tool support

As silicon cost reduces, the demands for higher performance and lower power consumption are ever increasing. The ability to dynamically control the number of resources employed can help balance and optimise a system in terms of its throughput, power consumption, and resilience to errors. The management of multiple resources requires building more advanced resource allocation logic than traditional 1-of-N arbiters posing the need for the efficient design flow supporting both the design and verification of such systems. Networks-on-Chip provide a good application example of distributed arbitration, in which the processor cores needing to transmit data are the clients; and the point-to-point links are the resources managed by routers. Building fast and smart arbiters can greatly benefit such systems in providing efficient and reliable communication service. In this thesis, a multi-resource arbiter was developed based on the Signal Transition Graph (STG) development flow. The arbiter distributes multiple active interchangeable resources that initiate requests when they are ready to be used. It supports concurrent resource utilization, which benefits creating asynchronous Multiple-Input-Multiple- Output (MIMO) queues. In order to deal with designs of higher complexity, an arbiter-oriented design flow is proposed. The flow is based on digital circuit components that are represented internally as STGs. This allows designing circuits without directly working with STGs but allowing their use for synthesis and formal verification. The interfaces for modelling, simulation, and visual model representation of the flow were implemented based on the existing modelling framework. As a result, the verification phase of the flow has helped to find hazards in existing Priority arbiter implementations. Finally, based on the logic-gate flow, the structure of a low-latency general purpose arbiter was developed. This design supports a wide variety of arbitration problems including the multi-resource management, which can benefit building NoCs employing complex and adaptive routing techniques.EThOS - Electronic Theses Online ServiceEPSRC grant GR/E044662/1 (STEP)GBUnited Kingdo