Stabilization and control of teleoperation systems with time delays

A control scheme for teleoperation systems with time delay is developed based on the concept of passivity. This control method requires neither detailed knowledge of the manipulator systems nor the mathematical models of the environments, and it is applicable for any time delays. The main contribution of this method is that it is less conservative than the traditional passivity based method. In this method, the passivity controller only operates when the system loses passivity, while in a traditional passivity formulation, the controller works at all times during operation and thus adversely affect the performance of the system.;Using the proposed control scheme, a sub-system is defined that is composed of the communication channel, slave robot and the manipulated environment. This sub system is treated as a one-port network component, and passivity theory is applied to this component to assure stability. The energy flowing into the one-port network, in the form of the control command and the force feedback, is monitored. A passivity regulator is activated to maintain the passivity of the network by modifying the feedback force to the master, and thus adjust the energy exchange between the master and the communication channel.;When this method is applied, only the information at the interface between the master manipulator and the communication channel is collected and observed, there is no need for accurate or detailed knowledge of the structure or timing of the communication channel. The method can make the system lossless regardless of the feedback force, the coordinating force controlling the slave joint motions or the contact force. The approach can stabilize the system regardless of the time delay, discontinuities with environmental contact, or discretization of the physical plant. It will pose no problem when the environmental contact force is directly fed back. The results of this work show that it is advantageous to use the measured environmental force as the feedback, providing superior performance for free motion and more realistic haptic feedback for the operator from the remote environment.;Simulation and experimental results are presented to verify the proposed control scheme

Passivity-Based adaptive bilateral teleoperation control for uncertain manipulators without jerk measurements

In this work, we consider the bilateral teleoperation problem of cooperative robotic systems in a Single-Master Multi-Slave (SM/MS) configuration, which is able to perform load transportation tasks in the presence of parametric uncertainty in the robot kinematic and dynamic models. The teleoperation architecture is based on the two-layer approach placed in a hierarchical structure, whose top and bottom layers are responsible for ensuring the transparency and stability properties respectively. The load transportation problem is tackled by using the formation control approach wherein the desired translational velocity and interaction force are provided to the master robot by the user, while the object is manipulated with a bounded constant force by the slave robots. Firstly, we develop an adaptive kinematic-based control scheme based on a composite adaptation law to solve the cooperative control problem for robots with uncertain kinematics. Secondly, the dynamic adaptive control for cooperative robots is implemented by means of a cascade control strategy, which does not require the measurement of the time derivative of force (which requires jerk measurements). The combination of the Lyapunov stability theory and the passivity formalism are used to establish the stability and convergence property of the closed-loop control system. Simulations and experimental results illustrate the performance and feasibility of the proposed control scheme.No presente trabalho, considera-se o problema de teleoperação bilateral de um sistema robótico cooperativo do tipo single-master e multiple-slaves (SM/MS) capaz de realizar tarefas de transporte de carga na presença de incertezas paramétricas no modelo cinemático e dinâmico dos robôs. A arquitetura de teleoperação está baseada na abordagem de duas camadas em estrutura hierárquica, onde as camadas superior e inferior são responsáveis por assegurar as propriedades de transparência e estabilidade respectivamente. O problema de transporte de carga é formulado usando a abordagem de controle de formação onde a velocidade de translação desejada e a força de interação são fornecidas ao robô mestre pelo operador, enquanto o objeto é manipulado pelos robôs escravos com uma força constante limitada. Primeiramente, desenvolve-se um esquema de controle adaptativo cinemático baseado em uma lei de adaptação composta para solucionar o problema de controle cooperativo de robôs com cinemática incerta. Em seguida, o controle adaptativo dinâmico de robôs cooperativos é implementado por meio de uma estratégia de controle em cascata, que não requer a medição da derivada da força (o qual requer a derivada da aceleração ou jerk). A teoria de estabilidade de Lyapunov e o formalismo de passividade são usados para estabelecer as propriedades de estabilidade e a convergência do sistema de controle em malha-fechada. Resultados de simulações numéricas ilustram o desempenho e viabilidade da estratégia de controle proposta

Wave Prediction and Delay Modeling for Teleoperation via Internet

This paper propose a novel approach for modeling the end-to-end time delay dynamics of the internet using system identification, and use it for controlling real-time internet-based telerobotic operations. When a single model is used, it needs to adapt to the operating conditions before an appropriate control mechanism can be applied. Slow adaptation may result in large transient errors. As an alternative, we propose to use an adaptive multiple model framework, and determine the best model for the current operating conditions to activate the corresponding controller. We employ multivariable wave prediction method to achieve this objective