Collaborative Distributed Beamforming for Spectrum-Sharing Systems

The scarcity of bandwidth has always been the main obstacle for providing reliable high date-rate wireless links, which are in great demand to accommodate nowadays and immediate future wireless applications. In addition, recent reports have showed inefficient usage and under-utilization of the available bandwidth. Cognitive radio (CR) has recently emerged as a promising solution to enhance the spectrum utilization, where it offers the ability for unlicensed users to access the licensed spectrum opportunistically. On one hand, by allowing opportunistic spectrum access, the overall spectrum utilization can be improved. On the other hand, transmission from cognitive nodes can cause severe interference to the licensed users of the spectrum. This requires cognitive radio networks (CRNs) to consider two essential design targets, namely, maximizing the spectrum utilization and minimizing the interference caused to the primary users (PUs). Such interference can be reduced through proper resource allocation, power control or other degrees of freedom techniques such as beamforming. In this thesis, we aim to use joint distributed beamforming and cooperative relaying in spectrum-sharing systems in an effort to enhance the spectrum efficiency and improve the performance of the secondary system. We investigate a one-way cooperative spectrum-sharing system in the presence of one PU and multiple PUs. We study two relaying schemes, namely, decode-and-forward (DF) and amplify-and-forward (AF) relaying in conjunction with distributed optimal beamforming. We employ zero forcing beamforming (ZFB) as a sub-optimal scheme, and compare both approaches through simulations. For both schemes, we derive closed-form expressions and asymptotic expressions for the outage probability and bit error rate (BER) over independent and identically distributed Rayleigh fading channels for binary phase shift keying (BPSK) and M-ary quadrature amplitude modulation (M-QAM) schemes. Numerical results show the effectiveness of the combination of the cooperative diversity and distributed beamforming in compensating for the loss in the secondary system's performance due to the primary user's co-channel interference (CCI). To further improve the spectrum efficiency, we employ distributed beamforming in two-way AF cooperative spectrum-sharing systems in the presence of multiple PUs. For this system, we investigate the transmission protocols over two, three and four time-slots. Our results show that the three time-slot protocol outperforms the two time-slot and four time-slot protocols in certain scenarios where it offers a good compromise between bandwidth efficiency and system performance. We extend the two-way relaying system to the DF scheme, where two practical two-way relaying strategies are investigated, namely, DF-XORing (bit-wise level) and DF-superposition (symbol-wise level). For each relaying strategy, we derive general optimal beamforming vectors and sup-optimal ZFB vectors at the relays. Employing ZFB, we present an analytical framework of the secondary system considering the effect of the primary-secondary mutual CCIs. Our results show that, when the received signals at the relays are weighted equally, the DF-XOR always outperforms both DF-superposition and AF relaying. In the last part of the thesis, we consider a limited feedback system model by assuming partial channel state information (CSI) of the interference channel between the secondary relays and primary receiver. In particular, the CSI feedback is limited only to the quantized channel direction information (CDI). To investigate the effect of the quantized CDI on the secondary system's performance, we derive closed-form expressions for the outage probability and the BER considering the mutual secondary-primary CCI. In the simulation results, we compare the system performance of the limited feedback with the perfect CSI. Our results show that the performance improves as the number of feedback bits increases

Hybrid satellite–terrestrial networks toward 6G : key technologies and open issues

Future wireless networks will be required to provide more wireless services at higher data rates and with global coverage. However, existing homogeneous wireless networks, such as cellular and satellite networks, may not be able to meet such requirements individually, especially in remote terrain, including seas and mountains. One possible solution is to use diversified wireless networks that can exploit the inter-connectivity between satellites, aerial base stations (BSs), and terrestrial BSs over inter-connected space, ground, and aerial networks. Hence, enabling wireless communication in one integrated network has attracted both the industry and the research fraternities. In this work, we provide a comprehensive survey of the most recent work on hybrid satellite–terrestrial networks (HSTNs), focusing on system architecture, performance analysis, design optimization, and secure communication schemes for different cooperative and cognitive HSTN network architectures. Different key technologies are compared. Based on this comparison, several open issues for future research are discussed

Cooperative diversity techniques for high-throughput wireless relay networks

Relay communications has attracted a growing interest in wireless communications with application to various enhanced technologies. This thesis considers a number of issues related to data throughput in various wireless relay network models. Particularly, new implementations of network coding (NC) and space-time coding (STC) techniques are investigated to offer various means of achieving high-throughput relay communications. Firstly, this thesis investigates different practical automatic repeat request (ARQ) retransmission protocols based on NC for two-way wireless relay networks to improve throughput efficiency. Two improved NC-based ARQ schemes are designed based on go-back-N and selective-repeat (SR) protocols. Addressing ARQ issues in multisource multidestination relay networks, a new NC-based ARQ protocol is proposed and two packet-combination algorithms are developed for retransmissions at relay and sources to significantly improve the throughput. In relation to the concept of channel quality indicator (CQI) reporting in two-way relay networks, two new efficient CQI reporting schemes are designed based on NC to improve the system throughput by allowing two terminals to simultaneously estimate the CQI of the distant terminal-relay link without incurring additional overhead. The transmission time for CQI feedback at the relays is reduced by half while the increase in complexity and the loss of performance are shown to be negligible. Furthermore, a low-complexity relay selection scheme is suggested to reduce the relay searching complexity. For the acknowledgment (ACK) process, this thesis proposes a new block ACK scheme based on NC to significantly reduce the ACK overheads and therefore produce an enhanced throughput. The proposed scheme is also shown to improve the reliability of block ACK transmission and reduce the number of data retransmissions for a higher system throughput. Additionally, this thesis presents a new cooperative retransmission scheme based on relay cooperation and NC to considerably reduce the number of retransmission packets and im- prove the reliability of retransmissions for a more power efficient and higher throughput system with non-overlapped retransmissions. Moreover, two relay selection schemes are recommended to determine the optimised number of relays for the retransmission. Finally, with respect to cognitive wireless relay networks (CWRNs), this thesis proposes a new cooperative spectrum sensing (CSS) scheme to improve the spectrum sensing performance and design a new CSS scheme based on NC for three-hop CWRNs to improve system throughput. Furthermore, a new distributed space-time-frequency block code (DSTFBC) is designed for a two- hop nonregenerative CWRN over frequency-selective fading channels. The proposed DSTFBC design achieves higher data rate, spatial diversity gain, and decoupling detection of data blocks at all destination nodes with a low-complexity receiver structure

Efficient Message Propagation In Dense Linear Ad-Hoc Networks

In this thesis, the dynamics of the cooperative broadcast in high density 1-dimensional (1D) networks is studied using multiple levels of relays. The benefits of the cooperative broadcast in terms of transmission range and power efficiency are evaluated by approximating the network as a continuum of nodes. Two transmission protocols are studied, the single-shot transmission and the continuous source transmission. In the single-shot transmission, the source node transmits a single message, whereas in the continuous source transmission, it transmits independent messages periodically adding signal interference into the picture. For each case, the analytical expressions for successful broadcasting are presented as a function of source and relay powers, decoding threshold and the noise power. This study shows that the broadcast behavior highly depends on the path-loss exponent $\gamma$ and the type of transmission, being bidirectional or unidirectional. It is shown that the message can propagate successfully to the entire network for all ranges of $\gamma$ using the cooperative broadcast. Furthermore, the cooperative broadcast is compared with the non-cooperative multi-hop broadcast in terms of power efficiency

Cooperative diversity architecture for wireless networks

The burgeoning demand for wireless networks necessitates reliable and energy-efficient communication architectures that are robust to the impairments of the wireless medium. Cooperative communication emerges as an appropriate technique that mitigates the severe effects of channel impairments through the use of cooperative diversity. Notwithstanding the fact that cooperative diversity is a very suitable technique to provide robust and reliable communication, the realization of cooperation idea precipitates many technical challenges that are associated with the overhaul of the wireless network design. This dissertation proposes a cooperative diversity architecture for wireless networks, that spans the physical, medium access and routing layers with parameters (jointly) optimized for overall system performance, taking into account the cost of cooperation in each layer. First, we present a new cooperative MAC protocol, COMAC, that enables cooperation of multiple relays in a distributed fashion. Through the proposed protocol, we investigate and demonstrate at what rate and for which scenarios cooperation brings benefits in terms of throughput and energy-efficiency. Our results demonstrate that cooperation initiation has a significant cost on both the throughput and energy-efficiency, which have been often disregarded in the literature. We next study the energy minimal joint cooperator selection and power assignment problem under transmit power constraints such that the cooperative transmissions satisfy an average bit error rate (BER) target. We derive the average BER of the cooperative system and we propose a simple yet close approximation to facilitate cooperator selection methods with closed form power assignment solutions. We formulate the joint cooperator selection and power assignment problem, we present the optimal solution (O-CSPA) and we also propose a distributed implementation (D-CSPA). Our results demonstrate that smart cooperator selection is essential, as it provides efficient resource allocation with reduced overhead leading to improved system performance. Our implementation and simulations of D-CSPA algorithm in COMAC protocol demonstrate that our distributed algorithm causes minimal overhead, yields improved throughput and reduced delay, while reducing the energy consumption. Finally, we propose a cooperative routing framework and a cross-layer architecture, RECOMAC, for wireless ad hoc networks. The RECOMAC architecture facilitates formation of cooperative sets on the fly in a decentralized and distributed fashion, requiring no overhead for relay selection and actuation, and resulting in opportunistically formed cooperative links that provide robust and reliable end-to-end communication, without the need for establishing a prior non-cooperative route, unlike existing schemes. The results demonstrate that under wireless channel impairments, such as fading and path loss, our cooperative forwarding framework and cross-layer architecture, RECOMAC significantly improve the system performance, in terms of throughput and delay, as compared to non-cooperative conventional layered network architecture with AODV routing over IEEE 802.11 MAC

Wireless optical backhauling for optical attocell networks

The backhaul of tens and hundreds of light fidelity (LiFi)-enabled luminaires constitutes a major challenge. The problem of backhauling for optical attocell networks has been approached by a number of wired solutions such as in-building power line communication (PLC), Ethernet and optical fiber. In this work, an alternative solution is proposed based on wireless optical communication in visible light (VL) and infrared (IR) bands. The proposed solution is thoroughly elaborated using a system level methodology. For a multi-user optical attocell network based on direct current biased optical orthogonal frequency division multiplexing (DCO-OFDM) and decode-and-forward (DF) relaying, detailed modeling and analysis of signal-to-interference-plus- noise (SINR) and end-to-end sum rate are presented, taking into account the effects of inter-backhaul and backhaul-to-access interferences. Inspired by concepts developed for radio frequency (RF) cellular networks, full-reuse visible light (FR-VL) and in-band visible light (IB-VL) bandwidth allocation policies are proposed to realize backhauling in the VL band. The transmission power is opportunistically minimized to enhance the backhaul power efficiency. For a two-tier FR-VL network, there is a technological challenge due to the limited capacity of the bottleneck backhaul link. The IR band is employed to add an extra degree of freedom for the backhaul capacity. For the IR backhaul system, a power-bandwidth tradeoff formulation is presented and closed form analytical expressions are derived for the corresponding power control coefficients. The sum rate performance of the network is studied using extensive Monte Carlo simulations. In addition, the effect of imperfect alignment in backhaul links is studied by using Monte Carlo simulation techniques. The emission semi-angle of backhaul LEDs is identified as a determining factor for the network performance. With the assumption that the access and backhaul systems share the same propagation medium, a large semi-angle of backhaul LEDs results in a substantial degradation in performance especially under FR-VL backhauling. However, it is shown both theoretically and by simulations that by choosing a sufficiently small semi-angle value, the adverse effect of the backhaul interference is entirely eliminated. By employing a narrow light beam in the back-haul system, the application of wireless optical backhauling is extended to multi-tier optical attocell networks. As a result of multi-hop backhauling with a tree topology, new challenges arise concerning optimal scheduling of finite bandwidth and power resources of the bottleneck backhaul link, i.e., optimal bandwidth sharing and opportunistic power minimization. To tackle the former challenge, optimal user-based and cell-based scheduling algorithms are developed. The latter challenge is addressed by introducing novel adaptive power control (APC) and fixed power control (FPC) schemes. The proposed bandwidth scheduling policies and power control schemes are supported by an analysis of their corresponding power control coefficients. Furthermore, another possible application of wireless optical backhauling for indoor networks is in downlink base station (BS) cooperation. More specifically, novel cooperative transmission schemes of non-orthogonal DF (NDF) and joint transmission with DF (JDF) in conjunction with fractional frequency reuse (FFR) partitioning are proposed for an optical attocell downlink. Their performance gains over baseline scenarios are assessed using Monte Carlo simulations