165 research outputs found

    Exploiting Map Topology Knowledge for Context-predictive Multi-interface Car-to-cloud Communication

    Full text link
    While the automotive industry is currently facing a contest among different communication technologies and paradigms about predominance in the connected vehicles sector, the diversity of the various application requirements makes it unlikely that a single technology will be able to fulfill all given demands. Instead, the joint usage of multiple communication technologies seems to be a promising candidate that allows benefiting from characteristical strengths (e.g., using low latency direct communication for safety-related messaging). Consequently, dynamic network interface selection has become a field of scientific interest. In this paper, we present a cross-layer approach for context-aware transmission of vehicular sensor data that exploits mobility control knowledge for scheduling the transmission time with respect to the anticipated channel conditions for the corresponding communication technology. The proposed multi-interface transmission scheme is evaluated in a comprehensive simulation study, where it is able to achieve significant improvements in data rate and reliability

    Robust Low-Cost Multiple Antenna Processing for V2V Communication

    Get PDF
    Cooperative V2V communication with frequent, periodic broadcast of messages between vehicles is a key enabler of applications that increase traffic safety and traffic efficiency on roads. Such broadcast V2V communication requires an antenna system with omnidirectional coverage, which is difficult to achieve using a single antenna element. For a mounted, omnidirectional antenna on a vehicle is distorted by the vehicle body, and exhibits a nonuniform directional pattern with low gain in certain directions. The thesis addresses this problem by developing schemes that employ multiple antennas (MAs) to achieve an effective radiation pattern with omnidirectional characteristics at both the transmit- and the receive-side. To ensure robust communication, the MA schemes are designed to minimize the burst error probability of several consecutive status messages in a scarce multipath environment with a dominant path between vehicles.First, at the receive-side, we develop a hybrid analog-digital antenna combiner. The analog part of the combiner is composed of low-cost analog combining networks (ACNs) of phase shifters that do not depend on channel stateinformation (CSI), while the digital part uses maximal ratio combining. We show that the optimal phase slopes of the analog part of the combiner (i.e., the phase slopes that minimize the burst error probability) are the same found under the optimization of a single ACN, which was done in earlier work. We then show how directional antennas can be employed in this context to achieve an effective omnidirectional radiation pattern of the antenna system that is robust in all directions of arrival of received signals.Secondly, at the transmit-side, we develop two low-cost analog MA schemes, an analog beamforming network (ABN) of phase shifters, and an antenna switching network (ASN), for the case when receivers employ the ACN or the hybrid combiner. Both schemes are shown to achieve an effective radiation pattern with improved omnidirectional characteristics at the transmit-side without relying on CSI.Thirdly, the schemes above were developed assuming that all vehicles broadcast their messages with the same fixed period. Therefore, we tackle the practical scenario when different vehicles use different and potentially varying broadcast periods. We show that the phase slopes of the MA schemes at the receiver and/or transmitter can be designed to support multiple broadcast periods.\ua0Lastly, the optimal phase slopes of the MA schemes were analytically derived under a worst-case propagation corresponding to a dominant path with an angle of departure, and an angle of arrival that are approximately non-varying over the time it takes to transmit and receive several packets. We relax this assumption and study the system performance under a time-varying dominant component instead. We derive a design rule that yields robust phase slopes that effectively mitigate the losses due to the time-variation of the dominant path

    Interference in vehicle-to-vehicle communication networks - analysis, modeling, simulation and assessment

    Get PDF
    In wireless vehicular communication networks the periodic transmission of status updates by all vehicles represents a basic service primitive, in particular for safety related applications. Due to the limited communication resources the question raises how much data each node may provide such that the quality of service required by applications can still be guaranteed under realistic interference conditions. Local broadcasts capacity is introduced and analyzed to tackle this open question

    Heterogeneous LTE/ Wi-Fi architecture for intelligent transportation systems

    Get PDF
    Intelligent Transportation Systems (ITS) make use of advanced technologies to enhance road safety and improve traffic efficiency. It is anticipated that ITS will play a vital future role in improving traffic efficiency, safety, comfort and emissions. In order to assist the passengers to travel safely, efficiently and conveniently, several application requirements have to be met simultaneously. In addition to the delivery of regular traffic and safety information, vehicular networks have been recently required to support infotainment services. Previous vehicular network designs and architectures do not satisfy this increasing traffic demand as they are setup for either voice or data traffic, which is not suitable for the transfer of vehicular traffic. This new requirement is one of the key drivers behind the need for new mobile wireless broadband architectures and technologies. For this purpose, this thesis proposes and investigates a heterogeneous IEEE 802.11 and LTE vehicular system that supports both infotainment and ITS traffic control data. IEEE 802.11g is used for V2V communications and as an on-board access network while, LTE is used for V2I communications. A performance simulation-based study is conducted to validate the feasibility of the proposed system in an urban vehicular environment. The system performance is evaluated in terms of data loss, data rate, delay and jitter. Several simulation scenarios are performed and evaluated. In the V2I-only scenario, the delay, jitter and data drops for both ITS and video traffic are within the acceptable limits, as defined by vehicular application requirements. Although a tendency of increase in video packet drops during handover from one eNodeB to another is observed yet, the attainable data loss rate is still below the defined benchmarks. In the integrated V2V-V2I scenario, data loss in uplink ITS traffic was initially observed so, Burst communication technique is applied to prevent packet losses in the critical uplink ITS traffic. A quantitative analysis is performed to determine the number of packets per burst, the inter-packet and inter-burst intervals. It is found that a substantial improvement is achieved using a two-packet Burst, where no packets are lost in the uplink direction. The delay, jitter and data drops for both uplink and downlink ITS traffic, and video traffic are below the benchmarks of vehicular applications. Thus, the results indicate that the proposed heterogeneous system offers acceptable performance that meets the requirements of the different vehicular applications. All simulations are conducted on OPNET Network Modeler and results are subjected to a 95% confidence analysis

    Edge-based Collision Avoidance for Vehicles and Vulnerable Users

    Get PDF
    Collision avoidance is one of the most promising applications for vehicular networks, dramatically improving the safety of the vehicles that support it. In this paper, we investigate how it can be extended to benefit vulnerable users, e.g., pedestrians and bicycles, equipped with a smartphone. We argue that, owing to the reduced capabilities of smartphones compared to vehicular on-board units, traditional distributed approaches are not viable, and that multi-access edge computing (MEC) support is needed. Thus, we propose a MEC-based collision avoidance system, discussing its architecture and evaluating its performance. We find that, thanks to MEC, we are able to extend the protection of collision avoidance, traditionally thought for vehicles, to vulnerable users without impacting its effectiveness or latency
    corecore