358 research outputs found
Advanced CT bone imaging in osteoporosis
Non-invasive and/or non-destructive techniques can provide structural information about bone, beyond simple bone densitometry. While the latter provides important information about osteoporotic fracture risk, many studies indicate that BMD only partly explains bone strength. Quantitative assessment of macro- and microstructural features may improve our ability to estimate bone strength. Methods for quantitatively assessing macrostructure include (besides conventional radiographs) DXA and CT, particularly volumetric quantitative CT (vQCT). Methods for assessing microstructure of trabecular bone non-invasively and/or non-destructively include high-resolution CT (hrCT), microCT (μCT), high-resolution magnetic resonance (hrMR) and microMR (μMR). vQCT, hrCT and hrMR are generally applicable in vivo; μCT and μMR are principally applicable in vitro. Despite recent progress made with these advanced imaging techniques, certain issues remain. The important balances between spatial resolution and sampling size, or between signal-to-noise and radiation dose or acquisition time, need further consideration, as do the complexity and expense of the methods vs their availability and accessibility. Clinically, the challenges for bone imaging include balancing the advantages of simple bone densitometry vs the more complex architectural features of bone or the deeper research requirements vs the broader clinical needs. The biological differences between the peripheral appendicular skeleton and the central axial skeleton must be further addressed. Finally, the relative merits of these sophisticated imaging techniques must be weighed with respect to their applications as diagnostic procedures, requiring high accuracy or reliability, compared with their monitoring applications, requiring high precision or reproducibility
Peripheral quantitative computed tomography (pQCT) for the assessment of bone strength in most of bone affecting conditions in developmental age: a review.
Peripheral quantitative computed tomography provides an automatical scan analysis of trabecular and cortical bone compartments, calculating not only their bone mineral density (BMD), but also bone geometrical parameters, such as marrow and cortical Cross-Sectional Area (CSA), Cortical Thickness (CoTh), both periosteal and endosteal circumference, as well as biomechanical parameters like Cross-Sectional Moment of Inertia (CSMI), a measure of bending, polar moment of inertia, indicating bone strength in torsion, and Strength Strain Index (SSI). Also CSA of muscle and fat can be extracted. Muscles, which are thought to stimulate bones to adapt their geometry and mineral content, are determinant to preserve or increase bone strength; thus, pQCT provides an evaluation of the functional ‘muscle-bone unit’, defined as BMC/muscle CSA ratio. This functional approach to bone densitometry can establish if bone strength is normally adapted to the muscle force, and if muscle force is adequate for body size, providing more detailed insights to targeted strategies for the prevention and treatment of bone fragility. The present paper offers an extensive review of technical features of pQCT and its possible clinical application in the diagnostic of bone status as well as in the monitoring of the skeleton’s health follow-up
A Longitudinal HR-pQCT Study of Alendronate Treatment in Postmenopausal Women With Low Bone Density: Relations Among Density, Cortical and Trabecular Microarchitecture, Biomechanics, and Bone Turnover
The goal of this study was to characterize longitudinal changes in bone microarchitecture and function in women treated with an established antifracture therapeutic. In this double-blind, placebo-controlled pilot study, 53 early postmenopausal women with low bone density (age = 56 ± 4 years; femoral neck T-score = −1.5 ± 0.6) were monitored by high-resolution peripheral quantitative computed tomography (HR-pQCT) for 24 months following randomization to alendronate (ALN) or placebo (PBO) treatment groups. Subjects underwent annual HR-pQCT imaging of the distal radius and tibia, dual-energy X-ray absorptiometry (DXA), and determination of biochemical markers of bone turnover (BSAP and uNTx). In addition to bone density and microarchitecture assessment, regional analysis, cortical porosity quantification, and micro-finite-element analysis were performed. After 24 months of treatment, at the distal tibia but not the radius, HR-pQCT measures showed significant improvements over baseline in the ALN group, particularly densitometric measures in the cortical and trabecular compartments and endocortical geometry (cortical thickness and area, medullary area) (p < .05). Cortical volumetric bone mineral density (vBMD) in the tibia alone showed a significant difference between treatment groups after 24 months (p < .05); however, regionally, significant differences in Tb.vBMD, Tb.N, and Ct.Th were found for the lateral quadrant of the radius (p < .05). Spearman correlation analysis revealed that the biomechanical response to ALN in the radius and tibia was specifically associated with changes in trabecular microarchitecture (|ρ| = 0.51 to 0.80, p < .05), whereas PBO progression of bone loss was associated with a broad range of changes in density, geometry, and microarchitecture (|ρ| = 0.56 to 0.89, p < .05). Baseline cortical geometry and porosity measures best predicted ALN-induced change in biomechanics at both sites (ρ > 0.48, p < .05). These findings suggest a more pronounced response to ALN in the tibia than in the radius, driven by trabecular and endocortical changes. © 2010 American Society for Bone and Mineral Research
Aspects of fracture risk in elderly women
The main purpose of this thesis was to identify and further specify factors relevant for the assessment of fracture risk. The studies were conducted on two different cohorts of elderly women. The Osteoporosis Prospective Risk Assessment study (OPRA) is a cohort of women followed for over a decade, from the age of 75. The Distal Forearm Fracture study (DFF) is a cross-sectional cohort of postmenopausal women with a distal forearm fracture and age-matched controls, with a mean age of 65.
Even though the mortality among individuals that declined participation in the OPRA study was increased, it appeared that participants were fairly representative in terms of fracture risk in general. In the OPRA cohort, self-reported history of fall corresponded to increased risk of distal forearm and any osteoporosis-related fracture. Decreased gait speed and a failed balance test corresponded to increased hip fracture risk. Current smokers had an increased risk of vertebral and any osteoporosis-related fracture. Smoking cessation reduced the risk of vertebral fracture. Time as a smoker corresponded to increased vertebral fracture risk. However, amount smoked and time from cessation did not affect fracture risk. In the DFF cohort, women with fracture had decreased site-specific volumetric trabecular and cortical BMD, as well as geometric alterations with increased size and decreased cortical thickness. Weak correlations between parathyroid hormone levels and 25-hydroxy vitamin D with cortical and trabecular bone were observed. Out of 161 women with a distal forearm fracture, 13 women (8%) were diagnosed with primary hyperparathyroidism, suggesting a higher prevalence than in the general population.
In summary, external validity in studies on fracture risk may be satisfactory. It appears to be of great importance to consider physical function and smoking habits in elderly women in the fracture risk assessment. In addition, both trabecular and cortical bone reductions as well as geometric alterations of the forearm may be contributing factors in the pathogenesis of a distal forearm fracture. The occurrence of primary hyperparathyroidism appears to be high in women with a distal forearm fracture, suggesting that further evaluation following a low-energy distal forearm fracture might be beneficial
Noninvasive prediction of failure in trabecular bone with simulated regularly shaped lyptic defects
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1997.Includes bibliographical references (p. 50-53).by James Hong.M.S
In vitro characterization of the three-dimensional strain pattern in human vertebrae affected by metastases
La colonna vertebrale è la principale sede di metastasi, le quali possono alterare la normale distribuzione dei tessuti ossei e ridurre la capacità della vertebra di sostenere carichi. L’instabilità spinale causata dalle metastasi, tuttavia, è di difficile determinazione. La caratterizzazione meccanica delle vertebre metastatiche permetterebbe di identificare e, di conseguenza trattare, quelle ad alto rischio di frattura.
In questo studio, ho valutato il comportamento meccanico a rottura di vertebre umane affette da metastasi misurando in vitro il campo di deformazione.
Undici provini, costituiti da due vertebre centrali, una metastatica e una sana, sono stati preparati e scansionati applicando carichi graduali di compressione in una micro-tomografia computerizzata (μCT). Le deformazioni principali sono state misurate attraverso un algoritmo globale di Digital Volume Correlation (DVC) e successivamente sono state analizzate.
Lo studio ha rivelato che le vertebre con metastasi litiche raggiungono deformazioni maggiori delle vertebre sane. Invece, le metastasi miste non assicurano un comportamento univoco in quanto combinano gli effetti antagonisti delle lesioni litiche e blastiche. Dunque la valutazione è stata estesa a possibili correlazioni tra il campo di deformazione e la microstruttura della vertebra. L'analisi ha identificato le regioni in cui parte la frattura (a più alta deformazione), senza identificare, in termini microstrutturali, una zona preferenziale di rottura a priori. Infatti, alcune zone con un pattern trabecolare denso, presunte più rigide, hanno mostrato deformazioni maggiori di quelle dei tessuti sani, sottolineando l’importanza della valutazione della qualità del tessuto osseo.
Questi risultati, generalizzati su un campione più ampio, potrebbero essere utilizzati per implementare nuovi criteri negli attuali sistemi di valutazione dell'instabilità spinale
Coronectomy of deeply impacted lower third molar : incidence of outcomes and complications after one year follow-up
Objectives: The purpose of present study was to assess the surgical management of impacted third molar with proximity to the inferior alveolar nerve and complications associated with coronectomy in a series of patients undergoing third molar surgery.
Material and Methods: The position of the mandibular canal in relation to the mandibular third molar region and mandibular foramen in the front part of the mandible (i.e., third molar in close proximity to the inferior alveolar nerve [IAN] or not) was identified on panoramic radiographs of patients scheduled for third molar extraction.
Results: Close proximity to the IAN was observed in 64 patients (35 females, 29 males) with an impacted mandibular third molar. Coronectomy was performed in these patients. The most common complication was tooth migration away from the mandibular canal (n = 14), followed by root exposure (n = 5). Re-operation to remove the root was performed in cases with periapical infection and root exposure.
Conclusions: The results indicate that coronectomy can be considered a reasonable and safe treatment alternative for patients who demonstrate elevated risk for injury to the inferior alveolar nerve with removal of the third molars. Coronectomy did not increase the incidence of damage to the inferior alveolar nerve and would be safer than complete extraction in situations in which the root of the mandibular third molar overlaps or is in close proximity to the mandibular canal
Recommended from our members
Plate-Rod Microstructural Modeling for Accurate and Fast Assessment of Bone Strength
Progressive bone loss and weakening bone strength associated with aging predispose the elderly population to osteoporosis and millions of costly fragility fractures. Micro finite element (µFE) analysis based on clinical high-resolution skeletal imaging provides an accurate computational solution to assessing the mechanical properties of bone, which can be used as the dominant factors for fracture risk. However, the current µFE analysis technique is impractical for clinical use due to its prohibitive computational costs, which result from the “voxel-to-element” approach of modeling human bone regardless of its microstructural pattern. I developed a novel plate-rod microstructural modeling technique for highly efficient patient-specific µFE analysis and translated it to clinical research for the assessment of bone strength in osteoporosis and fragility fractures.
Trabecular microstructure is composed of interconnected plate-like and rod-like trabeculae. Instead of converting every image voxel directly into an element, the plate-rod modeling approach created mechanical characterization for every individual trabecular plate and rod. The validation studies demonstrated that the PR model was able to reproduce the morphology and mechanical behavior of the original trabecular microstructure, while reducing the size of the µFE model and improving the efficiency of µFE simulations. First, the PR models of trabecular bone were developed based on high-resolution micro computed tomography (µCT), and evaluated in comparison with computational gold standard-voxel µFE models and experimental gold standard-mechanical testing for estimating Young’s modulus and yield strength of human trabecular bone. Results suggested that PR model predictions of the trabecular bone mechanical properties were strongly correlated with voxel models and mechanical testing results. Moreover, the PR models were indistinguishable from the corresponding voxel models constructed from the same images in the prediction of trabecular bone Young’s modulus and yield strength. In addition, PR model nonlinear µFE analyses resulted in over 200-fold reduction in computation time compared with voxel model µFE analyses.
In the effort of studying the heterogeneous bone mineralization in trabecular plates and rods, I developed an individual trabecula mineralization (ITM) analysis technique that allows quantification of the tissue mineral density of each individual trabecular plate and rod. By examining the variation of mineral density with trabecular types and orientations, it was found that trabecular plates were higher mineralized than trabecular rods. Furthermore, trabecular plate mineral density varied with trabecular orientation, increasing from the longitudinal direction to the transverse direction. ITM provided measurement of mineral density of each trabecular plate and rod, which was converted to trabecula-specific tissue modulus and used in the PR models to incorporate mineral heterogeneity in µFE simulations. Results suggested that heterogeneous PR models did not differ from the homogeneous PR models or specimen-specific PR models in their predictions of apparent Young’s modulus and yield strength of the human trabecular bone specimens from non-diseased donors.
Based on the trabecular bone PR model, a whole bone PR model was developed for assessing whole bone mechanical strength at the distal radius and the distal tibia from high-resolution peripheral quantitative computed tomography (HR-pQCT). The accuracy of the whole bone PR model was evaluated on human cadaver radius and tibia specimens which were imaged using HR-pQCT and µCT, respectively, and tested to failure. The whole bone stiffness and yield load of the radius and tibia segments predicted by HR-pQCT PR models were strongly correlated with those predicted by corresponding HR-pQCT voxel models, µCT voxel models, and mechanical testing measurements. The PR models µFE results were indistinguishable from the voxel models constructed from the same HR-pQCT images. Moreover, the PR models significantly reduced the computational time for nonlinear µFE assessment of whole bone strength. After evaluating the accuracy and efficiency of the newly developed whole bone PR model, it was employed in a clinical study aimed at characterizing the abnormalities of trabecular plate and rod microstructure, cortical bone, and whole bone mechanical properties in postmenopausal women with vertebral fractures. Women with vertebral fractures had thinner cortical bone, and larger trabecular area compared to their non-fractured peers. ITS analyses suggested vertebral fracture subjects had deteriorated trabecular microstructure, evidenced by fewer trabecular plates, less axially aligned trabeculae and less trabecular connectivity at both radius and tibia. These microstructural deficits translated into reduced whole bone stiffness and yield load at radius and tibia as predicted by PR model nonlinear µFE simulation. More importantly, logistic regression indicated that whole bone yield load was effective in discriminating the vertebral fracture subjects from the non-fractured controls
GENETIC DETERMINANTS OF BONE MINERAL DENSITY IN MEN: A CANDIDATE GENE APPROACH TO STUDYING A COMPLEX TRAIT
Osteoporosis is commonly considered a women's health problem, but is also a significant health concern for older men. Less is known about the predictors of osteoporosis and bone mineral density (BMD) in men. The aging of the population and expected increase in osteoporosis prevalence makes understanding the determinants of BMD of great public health importance.Genetics is an important determinant of BMD, but little is known about specific loci associated with BMD in men and even less is known about the genetic influences on volumetric BMD (vBMD). With this in mind, we investigated 4108 single nucleotide polymorphisms (SNPs) in 383 candidate genes for their association within a population of older Caucasian men. In addition, we investigated 148 of these SNPs in 28 WNT pathway genes for gene-gene interactions and gene-environment interactions with physical activity and body weight. We identified several SNPs that were associated with lumbar spine and femoral neck integral vBMD and explained 3.5% and 1.7% of the phenotypic variation in these traits, respectively. SNPs in two genes, adenomatous polyposis coli (APC) and the homeo box A gene cluster (HOXA) were associated with integral vBMD at both the femoral neck and lumbar spine. Analysis of cortical and trabecular vBMD at the femoral neck identified SNPs that explained 1.8% and 4.0% of the phenotypic variance, respectively. None of the SNPs for cortical vBMD were associated with trabecular vBMD. Statistically significant gene-gene and gene-environment interactions were also identified. Of note, statistically significant interaction effects of SNPs in the low density lipoprotein receptor-related protein 5 and physical activity level on integral vBMD at the femoral neck and lumbar spine were identified. Although additional work is needed to confirm and extend these findings we identified a number of novel associations for vBMD in older Caucasian men. Our results suggest the presence of genetic loci that are skeletal-site specific and specific to either cortical or trabecular bone. Additionally, these findings underscore the importance of evaluating genetic variation in the context of other genes and environmental factors
- …