Opto-VLSI based WDM multifunction device

The tremendous expansion of telecommunication services in the past decade, in part due to the growth of the Internet, has made the development of high-bandwidth optical net-works a focus of research interest. The implementation of Dense-Wavelength Division Multiplexing (DWDM) optical fiber transmission systems has the potential to meet this demand. However, crucial components of DWDM networks – add/drop multiplexers, filters, gain equalizers as well as interconnects between optical channels – are currently not implemented as dynamically reconfigurable devices. Electronic cross-connects, the traditional solution to the reconfigurable optical networks, are increasingly not feasible due to the rapidly increasing bandwidth of the optical channels. Thus, optically transparent, dynamically reconfigurable DWDM components are important for alleviating the bottleneck in telecommunication systems of the future. In this study, we develop a promising class of Opto-VLSI based devices, including a dynamic multi-function WDM processor, combining the functions of optical filter, channel equalizer and add-drop multiplexer, as well as a reconfigurable optical power splitter. We review the technological options for all optical WDM components and compare their advantages and disadvantages. We develop a model for designing Opto-VLSI based WDM devices, and demonstrate experimentally the Opto-VLSI multi-function WDM device. Finally, we discuss the feasibility of Opto-VLSI WDM components in meeting the stringent requirements of the optical communications industry

Efficient router design for network on chip

A Network-on-chip (NoC) is a new paradigm in complex system-on-chip (SoC) designs that provide efficient on chip communication networks. It allows scalable communication and allows decoupling of communication and computation. The data is routed through the networks in terms of packets. The routing of data is mainly done by routers. So the architecture of router must be an efficient one with a lower latency and higher throughput. In this project we designed, implemented and analyzed three different router architectures for a network on chip communication. The routers have five ports, four ports connected to other ports in four different directions and the fifth port connected to the processing element through a network interface. The first architecture is a basic router with demultiplexer and scheduler. The second architecture consists of crossbar switch and arbiter. The third architecture uses the CDMA technology that is popular in wireless communication. The three architectures were analyzed for their performance in terms of delay, throughput and latency and we concluded that CDMA router performs better than the other two

Null Convention Logic applications of asynchronous design in nanotechnology and cryptographic security

This dissertation presents two Null Convention Logic (NCL) applications of asynchronous logic circuit design in nanotechnology and cryptographic security. The first application is the Asynchronous Nanowire Reconfigurable Crossbar Architecture (ANRCA); the second one is an asynchronous S-Box design for cryptographic system against Side-Channel Attacks (SCA). The following are the contributions of the first application: 1) Proposed a diode- and resistor-based ANRCA (DR-ANRCA). Three configurable logic block (CLB) structures were designed to efficiently reconfigure a given DR-PGMB as one of the 27 arbitrary NCL threshold gates. A hierarchical architecture was also proposed to implement the higher level logic that requires a large number of DR-PGMBs, such as multiple-bit NCL registers. 2) Proposed a memristor look-up-table based ANRCA (MLUT-ANRCA). An equivalent circuit simulation model has been presented in VHDL and simulated in Quartus II. Meanwhile, the comparison between these two ANRCAs have been analyzed numerically. 3) Presented the defect-tolerance and repair strategies for both DR-ANRCA and MLUT-ANRCA. The following are the contributions of the second application: 1) Designed an NCL based S-Box for Advanced Encryption Standard (AES). Functional verification has been done using Modelsim and Field-Programmable Gate Array (FPGA). 2) Implemented two different power analysis attacks on both NCL S-Box and conventional synchronous S-Box. 3) Developed a novel approach based on stochastic logics to enhance the resistance against DPA and CPA attacks. The functionality of the proposed design has been verified using an 8-bit AES S-box design. The effects of decision weight, bitstream length, and input repetition times on error rates have been also studied. Experimental results shows that the proposed approach enhances the resistance to against the CPA attack by successfully protecting the hidden key --Abstract, page iii

Implementation of arithmetic primitives using truly deep submicron technology (TDST)

The invention of the transistor in 1947 at Bell Laboratories revolutionised the electronics industry and created a powerful platform for emergence of new industries. The quest to increase the number of devices per chip over the last four decades has resulted in rapid transition from Small-Scale-Integration (SSI) and Large-Scale-lntegration (LSI), through to the Very-Large-Scale-Integration (VLSI) technologies, incorporating approximately 10 to 100 million devices per chip. The next phase in this evolution is the Ultra-Large-Scale-Integration (ULSI) aiming to realise new application domains currently not accessible to CMOS technology. Although technology is continuously evolving to produce smaller systems with minimised power dissipation, the IC industry is facing major challenges due to constraints on power density (W/cm2) and high dynamic (operating) and static (standby) power dissipation. Mobile multimedia communication and optical based technologies have rapidly become a significant area of research and development challenging a variety of technological fronts. The future emergence or 4G (4th Generation) wireless communications networks is further driving this development, requiring increasing levels of media rich content. The processing requirements for capture, conversion, compression, decompression, enhancement and display of higher quality multimedia, place heavy demands on current ULSI systems. This is also apparent for mobile applications and intelligent optical networks where silicon chip area and power dissipation become primary considerations. In addition to the requirements for very low power, compact size and real-time processing, the rapidly evolving nature of telecommunication networks means that flexible soft programmable systems capable of adaptation to support a number of different standards and/or roles become highly desirable. In order to fully realise the capabilities promised by the 4G and supporting intelligent networks, new enabling technologies arc needed to facilitate the next generation of personal communications devices. Most of the current solutions to meet these challenges are based on various implementations of conventional architectures. For decades, silicon has been the main platform of computing, however it is slow, bulky, runs too hot, and is too expensive. Thus, new approaches to architectures, driving multimedia and future telecommunications systems, are needed in order to extend the life cycle of silicon technology. The emergence of Truly Deep Submicron Technology (TDST) and related 3-D interconnection technologies have provided potential alternatives from conventional architectures to 3-D system solutions, through integration of IDST, Vertical Software Mapping and Intelligent Interconnect Technology (IIT). The concept of Soft-Chip Technology (SCT) entails integration of Soft• Processing Circuits with Soft-Configurable Circuits . This concept can effectively manipulate hardware primitives through vertical integration of control and data. Thus the notion of 3-D Soft-Chip emerges as a new design algorithm for content-rich multimedia, telecommunication and intelligent networking system applications. 3•D architectures (design algorithms used suitable for 3-D soft-chip technology), are driven by three factors. The first is development of new device technology (TDST) that can support new architectures with complexities of 100M to 1000M devices. The second is development of advanced wafer bonding techniques such as Indium bump and the more futuristic optical interconnects for 3-D soft-chip mapping. The third is related to improving the performance of silicon CMOS systems as devices continue to scale down in dimensions. One of the fundamental building blocks of any computer system is the arithmetic component. Optimum performance of the system is determined by the efficiency of each individual component, as well as the network as a whole entity. Development of configurable arithmetic primitives is the fundamental focus in 3-D architecture design where functionality can be implemented through soft configurable hardware elements. Therefore the ability to improve the performance capability of a system is of crucial importance for a successful design. Important factors that predict the efficiency of such arithmetic components are: • The propagation delay of the circuit, caused by the gate, diffusion and wire capacitances within !he circuit, minimised through transistor sizing. and • Power dissipation, which is generally based on node transition activity. [2] Although optimum performance of 3-D soft-chip systems is primarily established by the choice of basic primitives such as adders and multipliers, the interconnecting network also has significant degree of influence on !he efficiency of the system. 3-D superposition of devices can decrease interconnect delays by up to 60% compared to a similar planar architecture. This research is based on development and implementation of configurable arithmetic primitives, suitable to the 3-D architecture, and has these foci: • To develop a variety of arithmetic components such as adders and multipliers with particular emphasis on minimum area and compatible with 3-D soft-chip design paradigm. • To explore implementation of configurable distributed primitives for arithmetic processing. This entails optimisation of basic primitives, and using them as part of array processing. In this research the detailed designs of configurable arithmetic primitives are implemented using TDST O.l3µm (130nm) technology, utilising CAD software such as Mentor Graphics and Cadence in Custom design mode, carrying through design, simulation and verification steps

Characterisation & optimisation of computational functional blocks for ATM switches GaAs MESFET technology

Thesis (MESc) -- University of Adelaide, Department of Electrical and Electronic Engineering, 199