A framework for fine-grain synthesis optimization of operational amplifiers

This thesis presents a cell-level framework for Operational Amplifiers Synthesis (OASYN) coupling both circuit design and layout. For circuit design, the tool applies a corner-driven optimization, accounting for on-chip performance variations. By exploring the process, voltage, and temperature variations space, the tool extracts design worst case solution. The tool undergoes sensitivity analysis along with Pareto-optimality to achieve required specifications. For layout phase, OASYN generates a DRC proved automated layout based on a sized circuit-level description. Morata et al. (1996) introduced an elegant representation of block placement called sequence pair for general floorplans (SP). Like TCG and BSG, but unlike O-tree, B*tree, and CBL, SP is P-admissible. Unlike SP, TCG supports incremental update during operation and keeps the information of the boundary modules as well as their relative positions in the representation. Block placement algorithms that are based on SP use heuristic optimization algorithms, e.g., simulated annealing where generation of large number of sequence pairs are required. Therefore a fast algorithm is needed to generate sequence pairs after each solution perturbation. The thesis presents a new simple and efficient O(n) runtime algorithm for fast realization of incremental update for cost evaluation. The algorithm integrates sequence pair and transitive closure graph advantages into TCG-S* a superior topology update scheme which facilitates the search for optimum desired floorplan. Experiments show that TCG-S* is better than existing works in terms of area utilization and convergence speed. Routing-aware placement is implemented in OASYN, handling symmetry constraints, e.g., interdigitization, common centroid, along with congestion elimination and the enhancement of placement routability

Dagstuhl News January - December 2005

"Dagstuhl News" is a publication edited especially for the members of the Foundation "Informatikzentrum Schloss Dagstuhl" to thank them for their support. The News give a summary of the scientific work being done in Dagstuhl. Each Dagstuhl Seminar is presented by a small abstract describing the contents and scientific highlights of the seminar as well as the perspectives or challenges of the research topic

Characterization and Avoidance of Critical Pipeline Structures in Aggressive Superscalar Processors

In recent years, with only small fractions of modern processors now accessible in a single cycle, computer architects constantly fight against propagation issues across the die. Unfortunately this trend continues to shift inward, and now the even most internal features of the pipeline are designed around communication, not computation. To address the inward creep of this constraint, this work focuses on the characterization of communication within the pipeline itself, architectural techniques to avoid it when possible, and layout co-design for early detection of problems. I present work in creating a novel detection tool for common case operand movement which can rapidly characterize an applications dataflow patterns. The results produced are suitable for exploitation as a small number of patterns can describe a significant portion of modern applications. Work on dynamic dependence collapsing takes the observations from the pattern results and shows how certain groups of operations can be dynamically grouped, avoiding unnecessary communication between individual instructions. This technique also amplifies the efficiency of pipeline data structures such as the reorder buffer, increasing both IPC and frequency. I also identify the same sets of collapsible instructions at compile time, producing the same benefits with minimal hardware complexity. This technique is also done in a backward compatible manner as the groups are exposed by simple reordering of the binarys instructions. I present aggressive pipelining approaches for these resources which avoids the critical timing often presumed necessary in aggressive superscalar processors. As these structures are designed for the worst case, pipelining them can produce greater frequency benefit than IPC loss. I also use the observation that the dynamic issue order for instructions in aggressive superscalar processors is predictable. Thus, a hardware mechanism is introduced for caching the wakeup order for groups of instructions efficiently. These wakeup vectors are then used to speculatively schedule instructions, avoiding the dynamic scheduling when it is not necessary. Finally, I present a novel approach to fast and high-quality chip layout. By allowing architects to quickly evaluate what if scenarios during early high-level design, chip designs are less likely to encounter implementation problems later in the process.Ph.D.Committee Chair: Scott Wills; Committee Member: David Schimmel; Committee Member: Gabriel Loh; Committee Member: Hsien-Hsin Lee; Committee Member: Yorai Ward

Improved Physical Design for Manufacturing Awareness and Advanced VLSI

Increasing challenges arise with each new semiconductor technology node, especially in advanced nodes, where the industry tries to extract every ounce of benefit as it approaches the limits of physics, through manufacturing-aware design technology co-optimization and design-based equivalent scaling. The increasing complexity of design and process technologies, and ever-more complex design rules, also become hurdles for academic researchers, separating academic researchers from the most up-to-date technical issues.This thesis presents innovative methodologies and optimizations to address the above challenges. There are three directions in this thesis: (i) manufacturing-aware design technology co-optimization; (ii) advanced node design-based equivalent scaling; and (iii) an open source academic detailed routing flow.To realize manufacturing-aware design technology co-optimization, this thesis presents two works: (i) a multi-row detailed placement optimization for neighbor diffusion effect mitigation between neighboring standard cells; and (ii) a post-routing optimization to generate 2D block mask layout for dummy segment removal in self-aligned multiple patterning.To achieve advanced node design-based equivalent scaling, this thesis presents two improved physical design methodologies: (i) a post-placement flop tray generation approach for clock power reduction; and (ii) a detailed placement approach to exploit inter-row M1 routing for congestion and wirelength reduction.To address the increasing gap between academia and industry, this thesis presents two works toward an open source academic detailed routing flow: (i) a complete, robust, scalable and design ruleaware dynamic programming-based pin access analysis framework; and (ii) TritonRoute – the open source detailed router that is capable of delivering DRC-clean detailed routing solutions in advanced nodes.This thesis concludes with a summary of its contributions and open directions for future research

Baseband Processing for 5G and Beyond: Algorithms, VLSI Architectures, and Co-design

In recent years the number of connected devices and the demand for high data-rates have been significantly increased. This enormous growth is more pronounced by the introduction of the Internet of things (IoT) in which several devices are interconnected to exchange data for various applications like smart homes and smart cities. Moreover, new applications such as eHealth, autonomous vehicles, and connected ambulances set new demands on the reliability, latency, and data-rate of wireless communication systems, pushing forward technology developments. Massive multiple-input multiple-output (MIMO) is a technology, which is employed in the 5G standard, offering the benefits to fulfill these requirements. In massive MIMO systems, base station (BS) is equipped with a very large number of antennas, serving several users equipments (UEs) simultaneously in the same time and frequency resource. The high spatial multiplexing in massive MIMO systems, improves the data rate, energy and spectral efficiencies as well as the link reliability of wireless communication systems. The link reliability can be further improved by employing channel coding technique. Spatially coupled serially concatenated codes (SC-SCCs) are promising channel coding schemes, which can meet the high-reliability demands of wireless communication systems beyond 5G (B5G). Given the close-to-capacity error correction performance and the potential to implement a high-throughput decoder, this class of code can be a good candidate for wireless systems B5G. In order to achieve the above-mentioned advantages, sophisticated algorithms are required, which impose challenges on the baseband signal processing. In case of massive MIMO systems, the processing is much more computationally intensive and the size of required memory to store channel data is increased significantly compared to conventional MIMO systems, which are due to the large size of the channel state information (CSI) matrix. In addition to the high computational complexity, meeting latency requirements is also crucial. Similarly, the decoding-performance gain of SC-SCCs also do come at the expense of increased implementation complexity. Moreover, selecting the proper choice of design parameters, decoding algorithm, and architecture will be challenging, since spatial coupling provides new degrees of freedom in code design, and therefore the design space becomes huge. The focus of this thesis is to perform co-optimization in different design levels to address the aforementioned challenges/requirements. To this end, we employ system-level characteristics to develop efficient algorithms and architectures for the following functional blocks of digital baseband processing. First, we present a fast Fourier transform (FFT), an inverse FFT (IFFT), and corresponding reordering scheme, which can significantly reduce the latency of orthogonal frequency-division multiplexing (OFDM) demodulation and modulation as well as the size of reordering memory. The corresponding VLSI architectures along with the application specific integrated circuit (ASIC) implementation results in a 28 nm CMOS technology are introduced. In case of a 2048-point FFT/IFFT, the proposed design leads to 42% reduction in the latency and size of reordering memory. Second, we propose a low-complexity massive MIMO detection scheme. The key idea is to exploit channel sparsity to reduce the size of CSI matrix and eventually perform linear detection followed by a non-linear post-processing in angular domain using the compressed CSI matrix. The VLSI architecture for a massive MIMO with 128 BS antennas and 16 UEs along with the synthesis results in a 28 nm technology are presented. As a result, the proposed scheme reduces the complexity and required memory by 35%–73% compared to traditional detectors while it has better detection performance. Finally, we perform a comprehensive design space exploration for the SC-SCCs to investigate the effect of different design parameters on decoding performance, latency, complexity, and hardware cost. Then, we develop different decoding algorithms for the SC-SCCs and discuss the associated decoding performance and complexity. Also, several high-level VLSI architectures along with the corresponding synthesis results in a 12 nm process are presented, and various design tradeoffs are provided for these decoding schemes

Practical Techniques for Improving Performance and Evaluating Security on Circuit Designs

As the modern semiconductor technology approaches to nanometer era, integrated circuits (ICs) are facing more and more challenges in meeting performance demand and security. With the expansion of markets in mobile and consumer electronics, the increasing demands require much faster delivery of reliable and secure IC products. In order to improve the performance and evaluate the security of emerging circuits, we present three practical techniques on approximate computing, split manufacturing and analog layout automation. Approximate computing is a promising approach for low-power IC design. Although a few accuracy-configurable adder (ACA) designs have been developed in the past, these designs tend to incur large area overheads as they rely on either redundant computing or complicated carry prediction. We investigate a simple ACA design that contains no redundancy or error detection/correction circuitry and uses very simple carry prediction. The simulation results show that our design dominates the latest previous work on accuracy-delay-power tradeoff while using 39% less area. One variant of this design provides finer-grained and larger tunability than that of the previous works. Moreover, we propose a delay-adaptive self-configuration technique to further improve the accuracy-delay-power tradeoff. Split manufacturing prevents attacks from an untrusted foundry. The untrusted foundry has front-end-of-line (FEOL) layout and the original circuit netlist and attempts to identify critical components on the layout for Trojan insertion. Although defense methods for this scenario have been developed, the corresponding attack technique is not well explored. Hence, the defense methods are mostly evaluated with the k-security metric without actual attacks. We develop a new attack technique based on structural pattern matching. Experimental comparison with existing attack shows that the new attack technique achieves about the same success rate with much faster speed for cases without the k-security defense, and has a much better success rate at the same runtime for cases with the k-security defense. The results offer an alternative and practical interpretation for k-security in split manufacturing. Analog layout automation is still far behind its digital counterpart. We develop the layout automation framework for analog/mixed-signal ICs. A hierarchical layout synthesis flow which works in bottom-up manner is presented. To ensure the qualified layouts for better circuit performance, we use the constraint-driven placement and routing methodology which employs the expert knowledge via design constraints. The constraint-driven placement uses simulated annealing process to find the optimal solution. The packing represented by sequence pairs and constraint graphs can simultaneously handle different kinds of placement constraints. The constraint-driven routing consists of two stages, integer linear programming (ILP) based global routing and sequential detailed routing. The experiment results demonstrate that our flow can handle complicated hierarchical designs with multiple design constraints. Furthermore, the placement performance can be further improved by using mixed-size block placement which works on large blocks in priority

Mascot: Microarchitecture Synthesis of Control Paths

This paper presents MASCOT (MicroArchitecture Synthesis of ConTrol paths). This synthesis system constructs the optimal microarchitecture for a control path of an instruction set processor. Input to the system is the behavioural specification of a control path. This specification is in finite state machine form which is mapped initially onto a single programmed logic array (PLA) microarchitecture. The synthesis strategy then applies a sequence of decompositions on this initial microarchitecture. This strategy follows a decision scheme until all design objectives are met. It transforms the initial microarchitecture into a complex microarchitecture of several PLAs and ROMs. Where it is impossible to meet the design objectives, the system constructs a microarchitecture which comes as close as possible to given design objectives. Design objectives are allowed on floorplan dimensions and delay. Our strategy integrates a number of known optimization methods for specific microarchitectures. Therefore this synthesis method explores a larger part of the design space than do other control path synthesis methods. Other methods are mostly bound to one microarchitecture which they optimize. Our system is not only very flexible in microarchitecture construction but also open for extension by other optimizations