An external control unit implemented for stimulator ASIC testing

This paper presents the design and development of an external control unit (ECU) for a stimulator ASIC testing purposes. The ECU consists of a graphical user interface (GUI) from the PC, a data transceiver and a power transmitter. The GUI was developed using MATLAB for stimulation data setup. The data transceiver was designed using hardware description language (HDL) Verilog code and was implemented in a Virtex-II Pro FPGA board. The overall stimulator ASIC design architecture and its operation for an epiretinal implant application are briefly explained to correlate with the ECU’s design requirements. The flexible multichannel stimulator ASIC was successfully fabricated in a 0.35μm AMS HVCMOS technology. Conducted simulation and measurement results on stimulation waveform generation, supply voltage compliance and external control of supply voltage adaptation validate the functionality of the designed ECU and the stimulator ASIC.Keywords: external control unit; data transceiver; stimulator ASIC; retinal prosthesis; epiretinal implant; stimulation waveform; Manchester data; voltage compliance

Advances in Scalable Implantable Systems for Neurostimulation Using Networked ASICs

Neurostimulation is a known method for restoring lost functions to neurologically impaired patients. This paper describes recent advances in scalable implantable stimulation systems using networked application specific integrated circuits (ASICs). It discusses how they can meet the ever-growing demand for high-density neural interfacing and long-term reliability. A detailed design example of an implantable (inductively linked) scalable stimulation system for restoring lower limb functions in paraplegics after spinal cord injury is presented. It comprises a central hub implanted at the costal margin and multiple Active Books which provide the interface for stimulating nerve roots in the cauda equina. A 16-channel stimulation system using four Active Books is demonstrated. Each Active Book has an embedded ASIC, which is responsible for initiating stimulus current to the electrodes. It also ensures device safety by monitoring temperature, humidity, and peak electrode voltage during stimulation. The implant hub was implemented using a microcontroller-based circuit. The ASIC in the Active Book was fabricated using XFAB’s 0.6-µm high-voltage CMOS process. The stimulation system does not require an accurate reference clock in the implant. Measured results are provided

An Optoelectronic Stimulator for Retinal Prosthesis

Retinal prostheses require the presence of viable population of cells in the inner retina. Evaluations of retina with Age-Related Macular Degeneration (AMD) and Retinitis Pigmentosa (RP) have shown a large number of cells remain in the inner retina compared with the outer retina. Therefore, vision loss caused by AMD and RP is potentially treatable with retinal prostheses. Photostimulation based retinal prostheses have shown many advantages compared with retinal implants. In contrary to electrode based stimulation, light does not require mechanical contact. Therefore, the system can be completely external and not does have the power and degradation problems of implanted devices. In addition, the stimulating point is flexible and does not require a prior decision on the stimulation location. Furthermore, a beam of light can be projected on tissue with both temporal and spatial precision. This thesis aims at fi nding a feasible solution to such a system. Firstly, a prototype of an optoelectronic stimulator was proposed and implemented by using the Xilinx Virtex-4 FPGA evaluation board. The platform was used to demonstrate the possibility of photostimulation of the photosensitized neurons. Meanwhile, with the aim of developing a portable retinal prosthesis, a system on chip (SoC) architecture was proposed and a wide tuning range sinusoidal voltage-controlled oscillator (VCO) which is the pivotal component of the system was designed. The VCO is based on a new designed Complementary Metal Oxide Semiconductor (CMOS) Operational Transconductance Ampli er (OTA) which achieves a good linearity over a wide tuning range. Both the OTA and the VCO were fabricated in the AMS 0.35 µm CMOS process. Finally a 9X9 CMOS image sensor with spiking pixels was designed. Each pixel acts as an independent oscillator whose frequency is controlled by the incident light intensity. The sensor was fabricated in the AMS 0.35 µm CMOS Opto Process. Experimental validation and measured results are provided

A Class-E Inductive Powering Link with Backward Data Communications for Implantable Sensor Systems

The design and implementation of a wireless power and data transfer system based on inductive coupling, having the potential to be used in numerous implantable bio-medical sensors and systems, is presented. The system consists of an external (primary) unit and an internal (secondary) unit. The external unit incorporates a high-efficiency switch-mode Class-E amplifier operating at ~200 kHz for driving the primary coil. The secondary unit consists of a parallel resonant coil followed by the power recovery circuitry. Means for backward data communication from the internal to the external unit over the same pair of coils has been realized using a simple FSK-based modulation scheme incorporated into the internal unit. FSK demodulation and associated filtering are integrated with the base inductive powering system. Prototype system test results indicate the inductive link efficiency can exceed 80% under optimum operating conditions with the overall power transfer efficiency of approximately 30%. The communication system is capable of transmitting up to 10kbps of data with the FSK carrier frequency (i.e., middle-frequency) being only 120kHz. The complete system functions reliably over an inter-coil distances exceeding 2.5cm with a 5V dc supply

Microsystème implantable dédié à la stimulation du cortex visuel

Notions fondamentales au sujet des stimulateurs implantables -- La stimulation électrique fonctionnelle -- Généralités au sujet des stimulateurs implantables -- Restitution de la vision par la stimulation électrique fonctionnelle -- Le système visuel biologique -- Principes et historique des implants visuels -- Considérations spécifiques aux implants intra-corticaux -- Travaux de pointe dans le domaine -- Dispositifs implantables -- Liens inductifs -- Composants externes -- Travaux du laboratoire de neurotechnologies polystim -- Conception et validation du dispositif implantable -- Architecture globale de l'implant -- Module de stimulation -- Module d'interface -- Implémentation et résultats expérimentaux -- Faisabilité d'une prothèse complète sur la base de l'implant proposé -- Conception et validatin du contrôleur externe -- Optimisation au niveau de la puissance dissipée -- Description du système externe -- Implémentation et validation -- Système d'expérimentation in-vivo -- Parotocoles d'expérimentation comportementale -- Description du système expérimental -- Fabrication du système expérimental

Biomedical Engineering

Biomedical engineering is currently relatively wide scientific area which has been constantly bringing innovations with an objective to support and improve all areas of medicine such as therapy, diagnostics and rehabilitation. It holds a strong position also in natural and biological sciences. In the terms of application, biomedical engineering is present at almost all technical universities where some of them are targeted for the research and development in this area. The presented book brings chosen outputs and results of research and development tasks, often supported by important world or European framework programs or grant agencies. The knowledge and findings from the area of biomaterials, bioelectronics, bioinformatics, biomedical devices and tools or computer support in the processes of diagnostics and therapy are defined in a way that they bring both basic information to a reader and also specific outputs with a possible further use in research and development

Neurostimulateur hautement intégré et nouvelle stratégie de stimulation pour améliorer la miction chez les paraplégiques

RÉSUMÉ Une lésion de la moelle épinière est un problème dévastateur médicalement et socialement. Pour la population des États-Unis seulement, il y a près de 10 000 nouveaux cas chaque année. A cause des nombreux types de lésions possibles, divers degrés de dysfonctionnement du bas appareil urinaire peuvent en découler. Une lésion est dite complète lors d’une perte totale des fonctions sensorielles et motrices volontaires en dessous du niveau de la lésion. Une lésion incomplète implique que certaines activités sensorielles et/ou motrices soient encore présentes. Si la lésion se produit au dessus du cône médullaire, la vessie développera une hyperréflexie qui se manifeste par des contractions réflexes non-inhibées. Ces contractions peuvent être accompagnées d’une augmentation de l’activité du sphincter externe. Par conséquent, cela mène à un état d’obstruction fonctionnelle de la vessie, qui induit une forte pression intravésicale à chacune des contractions réflexes et qui peut potentiellement endommager le haut appareil urinaire. Dans ce contexte, la neurostimulation est l'une des techniques les plus prometteuses pour la réhabilitation de la vessie chez les patients ayant subi une lésion de la moelle épinière. Le seul neurostimulateur implantable commercialisé, ciblant l'amélioration de la miction et ayant obtenu des résultats satisfaisants, nécessite une rhizotomie (section de certains nerfs) afin de réduire la dyssynergie entre la vessie et le sphincter. Cependant, la rhizotomie est irréversible et peut abolir les réflexes sexuels, de défécation ainsi que les sensations sacrales si encore présents dans le cas de lésions incomplètes. Afin d'éviter la rhizotomie, nous proposons une nouvelle stratégie de stimulation multi-site appliquée aux racines sacrées, et basée sur le blocage de la conduction des nerfs à l'aide d'une stimulation à haute fréquence comme alternative à la rhizotomie. Cette approche permettrait une meilleure miction en augmentant sélectivement la contraction de la vessie et en diminuant la dyssynergie. Huit expériences en phase aigüe ont étés menées sur des chiens pour vérifier la réponse de la vessie et du sphincter urétral externe à la stratégie de stimulation proposée. Le blocage à haute-fréquence (1 kHz) combiné à la stimulation basse-fréquence (30 Hz), a augmenté la différence de pression intra-vésicale/intra-urétrale moyenne jusqu'à 53 cmH2O et a réduit la pression intra-urétrale moyenne jusqu'à hauteur de 86 % relativement au niveau de référence. Dans l’objectif de tester la stratégie de neurostimulation proposée avec des expériences animales en phase chronique, un dispositif de neurostimulation implantable est requis. Un prototype discret implémentant cette stratégie de stimulation a été réalisé en utilisant uniquement des composants discrets disponibles commercialement. Ce prototype est capable de générer des impulsions à une fréquence aussi basse que 18 Hz tout en générant simultanément une forme d’onde alternative à une fréquence aussi haute que 8.6 kHz, et ce sur de multiples canaux. Lorsque tous les étages de stimulation et leurs différentes sorties sont activés avec des fréquences d’impulsions (2 mA, 217 μs) et de sinusoïdes de 30 Hz et 1 kHz respectivement, la consommation de puissance totale est autour de 4.5 mA (rms). Avec 50 mW de puissance inductive disponible par exemple et 4.5 mA de consommation de courant, le régulateur haute-tension peut être réglé à 10 V permettant ainsi une stimulation de 2 mA avec une impédance nerf-électrode de 4.4 kΩ. Le nombre effectif de sorties activées et le maximum réalisable des paramètres de stimulation sont limités par l’énergie disponible fournie par le lien inductif et l’impédance des interfaces nerf-électrode. Cependant, une plus grande intégration du neurostimulateur devient de plus en plus nécessaire à des fins de miniaturisation, de réduction de consommation de puissance, et d’augmentation du nombre de canaux de stimulation. Comme première étape vers une intégration totale, nous présentons la conception d’un neurostimulateur hautement intégré et qui peut être assemblé sur un circuit imprimé de 21 mm de diamètre. Le prototype est basé sur trois circuits intégrés, dédiés et fabriqués en technologie CMOS haute-tension, ainsi qu’un FPGA miniature à faible puissance et disponible commercialement. En utilisant une approche basée sur un abaisseur de tension, où la tension induite est laissée libre jusqu’à 20 V, l’étage d’entrée de récupération de puissance inductive et de données est totalement intégré.----------ABSTRACT Spinal cord injury (SCI) is a devastating condition medically and socially. For the population of USA only, the incidence is around 10 000 new cases per year. SCI leads to different degrees of dysfunction of the lower urinary tract due to a large variety of possible lesions. With a complete lesion, there is a complete loss of sensory and motor control below the level of lesion. An incomplete lesion implies that some sensory and/or motor activity is still present. Most patients with suprasacral SCI suffer from detrusor over-activity (DO) and detrusor sphincter dyssynergia (DSD). DSD leads to high intravesical pressure, high residual urine, urinary tract infection, and deterioration of the upper urinary tract. In this context, neurostimulation is one of the most promising techniques for bladder rehabilitation in SCI patients. The only commercialized implantable neurostimulator aiming for improved micturition and having obtained satisfactory results requires rhizotomy to reduce DSD. However, rhizotomy is irreversible and may abolish sexual and defecation reflexes as well as sacral sensations, if still present in case of incomplete SCI. In order to avoid rhizotomy, we propose a new multisite stimulation strategy applied to sacral roots, and based on nerve conduction blockade using high-frequency stimulation as an alternative to rhizotomy. This approach would allow a better micturition by increasing bladder contraction selectively and decreasing dyssynergia. Eight acute dog experiments were carried out to verify the bladder and the external urethral sphincter responses to the proposed stimulation strategy. High-frequency blockade (1 kHz) combined with low-frequency stimulation (30 Hz) increased the average intravesical-intraurethral pressure difference up to 53 cmH2O and reduced the average intraurethral pressure with respect to baseline by up to 86 %. To test the proposed neurostimulation strategy during chronic animal experiments, an implantable neurostimulateur is required. A discrete prototype implementing the proposed stimulation strategy has been designed using commercially available discrete components. This prototype is capable of generating a low frequency pulse waveform as low as 18 Hz with a simultaneous high frequency alternating waveform as high as 8.6 kHz, and that over different and multiple channels

Ultra-low-power circuits and systems for wearable and implantable medical devices

Thesis (Ph. D.)--Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2013.Cataloged from PDF version of thesis.Includes bibliographical references (pages 219-231).Advances in circuits, sensors, and energy storage elements have opened up many new possibilities in the health industry. In the area of wearable devices, the miniaturization of electronics has spurred the rapid development of wearable vital signs, activity, and fitness monitors. Maximizing the time between battery recharge places stringent requirements on power consumption by the device. For implantable devices, the situation is exacerbated by the fact that energy storage capacity is limited by volume constraints, and frequent battery replacement via surgery is undesirable. In this case, the design of energy-efficient circuits and systems becomes even more crucial. This thesis explores the design of energy-efficient circuits and systems for two medical applications. The first half of the thesis focuses on the design and implementation of an ultra-low-power, mixed-signal front-end for a wearable ECG monitor in a 0.18pm CMOS process. A mixed-signal architecture together with analog circuit optimizations enable ultra-low-voltage operation at 0.6V which provides power savings through voltage scaling, and ensures compatibility with state-of-the-art DSPs. The fully-integrated front-end consumes just 2.9[mu]W, which is two orders of magnitude lower than commercially available parts. The second half of this thesis focuses on ultra-low-power system design and energy-efficient neural stimulation for a proof-of-concept fully-implantable cochlear implant. First, implantable acoustic sensing is demonstrated by sensing the motion of a human cadaveric middle ear with a piezoelectric sensor. Second, alternate energy-efficient electrical stimulation waveforms are investigated to reduce neural stimulation power when compared to the conventional rectangular waveform. The energy-optimal waveform is analyzed using a computational nerve fiber model, and validated with in-vivo ECAP recordings in the auditory nerve of two cats and with psychophysical tests in two human cochlear implant users. Preliminary human subject testing shows that charge and energy savings of 20-30% and 15-35% respectively are possible with alternative waveforms. A system-on-chip comprising the sensor interface, reconfigurable sound processor, and arbitrary-waveform neural stimulator is implemented in a 0.18[mu]m high-voltage CMOS process to demonstrate the feasibility of this system. The sensor interface and sound processor consume just 12[mu]W of power, representing just 2% of the overall system power which is dominated by stimulation. As a result, the energy savings from using alternative stimulation waveforms transfer directly to the system.by Marcus Yip.Ph.D