1,048 research outputs found
Wide-bandwidth high-resolution search for extraterrestrial intelligence
Research accomplished during the third 6-month period is summarized. Research covered the following: dual-horn antenna performance; high electron mobility transistors (HEMT) low-noise amplifiers; downconverters; fast Fourier transform (FFT) array; and backend 'feature recognizer' array
Integrated Electronics for Wireless Imaging Microsystems with CMUT Arrays
Integration of transducer arrays with interface electronics in the form of single-chip CMUT-on-CMOS has emerged into the field of medical ultrasound imaging
and is transforming this field. It has already been used in several commercial products such as handheld full-body imagers and it is being implemented by commercial and academic groups for Intravascular Ultrasound and Intracardiac Echocardiography. However, large attenuation of ultrasonic waves transmitted through
the skull has prevented ultrasound imaging of the brain. This research is a prime
step toward implantable wireless microsystems that use ultrasound to image the
brain by bypassing the skull. These microsystems offer autonomous scanning
(beam steering and focusing) of the brain and transferring data out of the brain for
further processing and image reconstruction.
The objective of the presented research is to develop building blocks of an integrated electronics architecture for CMUT based wireless ultrasound imaging systems while providing a fundamental study on interfacing CMUT arrays with their
associated integrated electronics in terms of electrical power transfer and acoustic
reflection which would potentially lead to more efficient and high-performance
systems.
A fully wireless architecture for ultrasound imaging is demonstrated for the
first time. An on-chip programmable transmit (TX) beamformer enables phased
array focusing and steering of ultrasound waves in the transmit mode while its
on-chip bandpass noise shaping digitizer followed by an ultra-wideband (UWB)
uplink transmitter minimizes the effect of path loss on the transmitted image data
out of the brain. A single-chip application-specific integrated circuit (ASIC) is de-
signed to realize the wireless architecture and interface with array elements, each
of which includes a transceiver (TRX) front-end with a high-voltage (HV) pulser,
a high-voltage T/R switch, and a low-noise amplifier (LNA). Novel design techniques are implemented in the system to enhance the performance of its building
blocks.
Apart from imaging capability, the implantable wireless microsystems can include a pressure sensing readout to measure intracranial pressure. To do so, a
power-efficient readout for pressure sensing is presented. It uses pseudo-pseudo
differential readout topology to cut down the static power consumption of the sensor for further power savings in wireless microsystems.
In addition, the effect of matching and electrical termination on CMUT array
elements is explored leading to new interface structures to improve bandwidth
and sensitivity of CMUT arrays in different operation regions. Comprehensive
analysis, modeling, and simulation methodologies are presented for further investigation.Ph.D
A radiation-hard dual-channel 12-bit 40 MS/s ADC prototype for the ATLAS liquid argon calorimeter readout electronics upgrade at the CERN LHC
The readout electronics upgrade for the ATLAS Liquid Argon Calorimeters at
the CERN Large Hadron Collider requires a radiation-hard ADC. The design of a
radiation-hard dual-channel 12-bit 40 MS/s pipeline ADC for this use is
presented. The design consists of two pipeline A/D channels each with four
Multiplying Digital-to-Analog Converters followed by 8-bit
Successive-Approximation-Register analog-to-digital converters. The custom
design, fabricated in a commercial 130 nm CMOS process, shows a performance of
67.9 dB SNDR at 10 MHz for a single channel at 40 MS/s, with a latency of 87.5
ns (to first bit read out), while its total power consumption is 50 mW/channel.
The chip uses two power supply voltages: 1.2 and 2.5 V. The sensitivity to
single event effects during irradiation is measured and determined to meet the
system requirements
LArPix: Demonstration of low-power 3D pixelated charge readout for liquid argon time projection chambers
We report the demonstration of a low-power pixelated readout system designed
for three-dimensional ionization charge detection and digital readout of liquid
argon time projection chambers (LArTPCs). Unambiguous 3D charge readout was
achieved using a custom-designed system-on-a-chip ASIC (LArPix) to uniquely
instrument each pad in a pixelated array of charge-collection pads. The LArPix
ASIC, manufactured in 180 nm bulk CMOS, provides 32 channels of
charge-sensitive amplification with self-triggered digitization and multiplexed
readout at temperatures from 80 K to 300 K. Using an 832-channel LArPix-based
readout system with 3 mm spacing between pads, we demonstrated low-noise
(500 e RMS equivalent noise charge) and very low-power (100
W/channel) ionization signal detection and readout. The readout was used
to successfully measure the three-dimensional ionization distributions of
cosmic rays passing through a LArTPC, free from the ambiguities of existing
projective techniques. The system design relies on standard printed circuit
board manufacturing techniques, enabling scalable and low-cost production of
large-area readout systems using common commercial facilities. This
demonstration overcomes a critical technical obstacle for operation of LArTPCs
in high-occupancy environments, such as the near detector site of the Deep
Underground Neutrino Experiment (DUNE).Comment: 19 pages, 10 figures, 1 ancillary animation. V3 includes minor
revisions based on referee comment
Optoelectronic Reservoir Computing
Reservoir computing is a recently introduced, highly efficient bio-inspired
approach for processing time dependent data. The basic scheme of reservoir
computing consists of a non linear recurrent dynamical system coupled to a
single input layer and a single output layer. Within these constraints many
implementations are possible. Here we report an opto-electronic implementation
of reservoir computing based on a recently proposed architecture consisting of
a single non linear node and a delay line. Our implementation is sufficiently
fast for real time information processing. We illustrate its performance on
tasks of practical importance such as nonlinear channel equalization and speech
recognition, and obtain results comparable to state of the art digital
implementations.Comment: Contains main paper and two Supplementary Material
ECFA Detector R&D Panel, Review Report
Two special calorimeters are foreseen for the instrumentation of the very
forward region of an ILC or CLIC detector; a luminometer (LumiCal) designed to
measure the rate of low angle Bhabha scattering events with a precision better
than 10 at the ILC and 10 at CLIC, and a low polar-angle
calorimeter (BeamCal). The latter will be hit by a large amount of
beamstrahlung remnants. The intensity and the spatial shape of these
depositions will provide a fast luminosity estimate, as well as determination
of beam parameters. The sensors of this calorimeter must be radiation-hard.
Both devices will improve the e.m. hermeticity of the detector in the search
for new particles. Finely segmented and very compact electromagnetic
calorimeters will match these requirements. Due to the high occupancy, fast
front-end electronics will be needed. Monte Carlo studies were performed to
investigate the impact of beam-beam interactions and physics background
processes on the luminosity measurement, and of beamstrahlung on the
performance of BeamCal, as well as to optimise the design of both calorimeters.
Dedicated sensors, front-end and ADC ASICs have been designed for the ILC and
prototypes are available. Prototypes of sensor planes fully assembled with
readout electronics have been studied in electron beams.Comment: 61 pages, 51 figure
A Fast Digital Integrator for magnetic measurements
In this work, the Fast Digital Integrator (FDI), conceived for characterizing dynamic features of superconducting magnets and measuring fast transients of magnetic fields at the European Organization for Nuclear Research (CERN) and other high-energy physics research centres, is presented. FDI development was carried out inside a framework of cooperation between the group of Magnet Tests and Measurements of CERN and the Department of Engineering of the University of Sannio.
Drawbacks related to measurement time decrease of main high-performance analog-to-digital architectures, such as Sigma-Delta and integrators, are overcome by founding
the design on (i) a new generation of successive-approximation converters, for high resolution (18-bit) at high rate (500 kS/s), (ii) a digital signal processor, for on-line down-sampling by integrating the input signal, (iii) a custom time base, based on a Universal Time Counter, for reducing time-domain uncertainty, and (iv) a PXI board, for high bus transfer rate, as well as noise and heat immunity. A metrological analysis, aimed at
verifying the effect of main uncertainty sources, systematic errors, and design parameters on the instrument performance is presented. In particular, results of an analytical study, a preliminary numerical analysis, and a comprehensive multi-factor analysis carried out to confirm the instrument design, are reported. Then, the selection of physical components and the FDI implementation on a PXI board according to the above described conceptual architecture are highlighted. The on-line integration algorithm, developed on the DSP in order to achieve a real-time Nyquist bandwidth of 125 kHz on the flux, is described. C++ classes for remote control of FDI, developed
as a part of a new software framework, the Flexible Framework for Magnetic Measurements, conceived for managing a wide spectrum of magnetic measurements techniques, are described.
Experimental results of metrological and throughput characterization of FDI are reported. In particular, in metrological characterization, FDI working as a digitizer and as an integrator, was assessed by means of static,
dynamic, and time base tests. Typical values of static integral nonlinearity of ±7 ppm, ±3 ppm of 24-h stability, and 108 dB of signal-to-noise-anddistortion ratio at 10 Hz on Nyquist bandwidth of 125 kHz, were surveyed during the integrator working. The actual throughput rate was measured by a specific procedure of PXI bus analysis, by highlighting typical values of 1 MB/s.
Finally, the experimental campaign, carried out at CERN facilities of superconducting
magnet testing for on-field qualification of FDI, is illustrated. In particular, the FDI was included in a measurement station using also the new generation of fast transducers. The performance of such a station was compared with the one of the previous standard station used in series tests for qualifying LHC magnets. All the results highlight the FDI full capability of acting as the new de-facto standard for high-performance magnetic measurements at CERN and in other high-energy physics research centres
Recognition of 2-D occluded objects and their manipulation by PUMA 560 robot
Journal ArticleA new method based on a cluster-structure paradigm is presented for the recognition of 2-D partially occluded objects. This method uses the line segments which comprise the boundary of an object in the recognition process. The length of each of these segments as well as the angle between successive segments comprise the only information needed by the program to find an object's position. The technique is applied in several steps which include segment clustering, finding all sequences in one pass over the data, and final clustering of sequences so as to obtain the desired rotational and translational information. The amount of computational effort decreases as the recognition algorithm progresses. As compared to earlier methods, which identify an object based on only one sequence of matched segments, the new technique allows the identification of all parts of the model which match with the apparent image. These parts need not be adjacent to each other. Also the method is able to tolerate a moderate change in scale and a significant amount of shape distortion arising as a result of segmentation or the polygonal approximation of the boundary of the object. The method has been evaluated with respect to a large number of examples where several objects partially occlude one another. A summary of the results is presented
Modular digital holographic fringe data processing system
A software architecture suitable for reducing holographic fringe data into useful engineering data is developed and tested. The results, along with a detailed description of the proposed architecture for a Modular Digital Fringe Analysis System, are presented
Review of the outcome of two workshops on electronics for LHC experiments
Two Workshops were organized since September 1995 by the CERN LHC Electronics Review Board, LERB. Radiation-hard processes, opto-electronics, trigger and event building systems, electronics for calorimeters, muon detectors and trackers, were discussed in detail. During the first Workshop a variety of designs were presented in the light of the major requirements set by the detector collaborations. The second Workshop held in Hungary last September confirmed that a number of technological choices had been made. Some of the more salient designs are presented
- …