Design High speed Reed Solomon Decoder on FPGA

This paper presents a design on Reed Solomon Code for Wi-Max Network. The implementation, written in Very High speed hardware description Language (VHDL) is based on Berlekamp Massey, Forney and Chain Algorithm. The 802.16 network standard recommends the use of Reed-Solomon code RS (255,239), which is implemented and discussed in this paper. It is targeted to be applied in a forward error correction system based on 802.16 network standard to improve the overall performance of the system. The objective of this work is to implement a Reed- Solomon VHDL code to measure the performance of the RS Decoder on Xilinx Spartan 6 (xc6slx100t-3-fgg484) and Xilinx Spartan 3e (xc3s500e-4-fg320) FPGA.The performance of the implemented RS codec on both FPGAs will be compared. The performance metrics to be used are the area occupied by the design and the frequency at which the design can run

FPGA implementation of Reed Solomon codec for 40Gbps Forward Error Correction in optical networks

Reed-Solomon error correcting codes (RS codes) are widely used in communication and data storage systems to recover data from possible errors that occur during data transfer. A growing application of RS codes is Forward Error Correction (FEC) in the Optical Network (OTN G.709), which uses RS(255,239) to support the OTU-3 (43.018 Gbps) standard. There have been considerable efforts in the area of RS architecture for ASIC implementation. However, there appears to be little reported work on efficient RS codec (encoder and decoder) for Field Programmable Gate Arrays (FPGAs), which has increasing interests in industry. This thesis investigates the implementation and design methodology of the RS(255,239) codec on FPGAs. A portable VHDL code is developed and synthesized for Xilinx\u27s Virtex4 and Altera\u27s StratixII. The FPGA architectures are analyzed and the required design methodologies are adopted to efficiently utilize the available resources. Unfortunately, due to the fixed size of FPGA devices, the RS decoder is not only constrained by the required timing of the system, but also by the size of the targeted device. This research will facilitate the decision-making process for selecting a reconfigurable device for a RS decoder, implementing the Berlekamp-Massey Algorithm

ENERGY EFFICIENCY EXPLORATION OF COARSE-GRAIN RECONFIGURABLE ARCHITECTURE WITH EMERGING NONVOLATILE MEMORY

With the rapid growth in consumer electronics, people expect thin, smart and powerful devices, e.g. Google Glass and other wearable devices. However, as portable electronic products become smaller, energy consumption becomes an issue that limits the development of portable systems due to battery lifetime. In general, simply reducing device size cannot fully address the energy issue. To tackle this problem, we propose an on-chip interconnect infrastructure and pro- gram storage structure for a coarse-grained reconfigurable architecture (CGRA) with emerging non-volatile embedded memory (MRAM). The interconnect is composed of a matrix of time-multiplexed switchboxes which can be dynamically reconfigured with the goal of energy reduction. The number of processors performing computation can also be adapted. The use of MRAM provides access to high-density storage and lower memory energy consumption versus more standard SRAM technologies. The combination of CGRA, MRAM, and flexible on-chip interconnection is considered for signal processing. This application domain is of interest based on its time-varying computing demands. To evaluate CGRA architectural features, prototype architectures have been pro- totyped in a field-programmable gate array (FPGA). Measurements of energy, power, instruction count, and execution time performance are considered for a scalable num- ber of processors. Applications such as adaptive Viterbi decoding and Reed Solomon coding are used for evaluation. To complete this thesis, a time-scheduled switchbox was integrated into our CGRA model. This model was prototyped on an FPGA. It is shown that energy consumption can be reduced by about 30% if dynamic design reconfiguration is performed

Ein flexibles, heterogenes Bildverarbeitungs-Framework für weltraumbasierte, rekonfigurierbare Datenverarbeitungsmodule

Scientific instruments as payload of current space missions are often equipped with high-resolution sensors. Thereby, especially camera-based instruments produce a vast amount of data. To obtain the desired scientific information, this data usually is processed on ground. Due to the high distance of missions within the solar system, the data rate for downlink to the ground station is strictly limited. The volume of scientific relevant data is usually less compared to the obtained raw data. Therefore, processing already has to be carried out on-board the spacecraft. An example of such an instrument is the Polarimetric and Helioseismic Imager (PHI) on-board Solar Orbiter. For acquisition, storage and processing of images, the instrument is equipped with a Data Processing Module (DPM). It makes use of heterogeneous computing based on a dedicated LEON3 processor in combination with two reconfigurable Xilinx Virtex-4 Field-Programmable Gate Arrays (FPGAs). The thesis will provide an overview of the available space-grade processing components (processors and FPGAs) which fulfill the requirements of deepspace missions. It also presents existing processing platforms which are based upon a heterogeneous system combining processors and FPGAs. This also includes the DPM of the PHI instrument, whose architecture will be introduced in detail. As core contribution of this thesis, a framework will be presented which enables high-performance image processing on such hardware-based systems while retaining software-like flexibility. This framework mainly consists of a variety of modules for hardware acceleration which are integrated seamlessly into the data flow of the on-board software. Supplementary, it makes extensive use of the dynamic in-flight reconfigurability of the used Virtex-4 FPGAs. The flexibility of the presented framework is proven by means of multiple examples from within the image processing of the PHI instrument. The framework is analyzed with respect to processing performance as well as power consumption.Wissenschaftliche Instrumente auf aktuellen Raumfahrtmissionen sind oft mit hochauflösenden Sensoren ausgestattet. Insbesondere kamerabasierte Instrumente produzieren dabei eine große Menge an Daten. Diese werden üblicherweise nach dem Empfang auf der Erde weiterverarbeitet, um daraus wissenschaftlich relevante Informationen zu gewinnen. Aufgrund der großen Entfernung von Missionen innerhalb unseres Sonnensystems ist die Datenrate zur Übertragung an die Bodenstation oft sehr begrenzt. Das Volumen der wissenschaftlich relevanten Daten ist meist deutlich kleiner als die aufgenommenen Rohdaten. Daher ist es vorteilhaft, diese bereits an Board der Sonde zu verarbeiten. Ein Beispiel für solch ein Instrument ist der Polarimetric and Helioseismic Imager (PHI) an Bord von Solar Orbiter. Um die Daten aufzunehmen, zu speichern und zu verarbeiten, ist das Instrument mit einem Data Processing Module (DPM) ausgestattet. Dieses nutzt ein heterogenes Rechnersystem aus einem dedizierten LEON3 Prozessor, zusammen mit zwei rekonfigurierbaren Xilinx Virtex-4 Field-Programmable Gate Arrays (FPGAs). Die folgende Arbeit gibt einen Überblick über verfügbare Komponenten zur Datenverarbeitung (Prozessoren und FPGAs), die den Anforderungen von Raumfahrtmissionen gerecht werden, und stellt einige existierende Plattformen vor, die auf einem heterogenen System aus Prozessor und FPGA basieren. Hierzu gehört auch das Data Processing Module des PHI Instrumentes, dessen Architektur im Verlauf dieser Arbeit beschrieben wird. Als Kernelement der Dissertation wird ein Framework vorgestellt, das sowohl eine performante, als auch eine flexible Bilddatenverarbeitung auf einem solchen System ermöglicht. Dieses Framework besteht aus verschiedenen Modulen zur Hardwarebeschleunigung und bindet diese nahtlos in den Datenfluss der On-Board Software ein. Dabei wird außerdem die Möglichkeit genutzt, die eingesetzten Virtex-4 FPGAs dynamisch zur Laufzeit zu rekonfigurieren. Die Flexibilität des vorgestellten Frameworks wird anhand mehrerer Fallbeispiele aus der Bildverarbeitung von PHI dargestellt. Das Framework wird bezüglich der Verarbeitungsgeschwindigkeit und Energieeffizienz analysiert

Towards a triple mode common operator FFT for Software Radio systems

International audienceA scenario to design a Triple Mode FFT is addressed. Based on a Dual Mode FFT structure, we present a methodology to reach a triple mode FFT operator (TMFFT) able to operate over three different fields: complex number domain C, Galois Fields GF(Ft) and GF(2m). We propose a reconfigurable Triple mode Multiplier that constitutes the core of the Butterflybased FFT. A scalable and flexible unit for the polynomial reduction needed in the GF(2m) multiplication is also proposed. An FPGA implementation of the proposed multiplier is given and the measures show a gain of 18%in terms of performance-to-cost ratio compared to a "Velcro" approach where two self-contained operators are implemented separately

Reconfigurable architectures for the next generation of mobile device telecommunications systems

Mobile devices have become a dominant tool in our daily lives. Business and personal usage has escalated tremendously since the emergence of smartphones and tablets. The combination of powerful processing in mobile devices, such as smartphones and the Internet, have established a new era for communications systems. This has put further pressure on the performance and efficiency of telecommunications systems in delivering the aspirations of users. Mobile device users no longer want devices that merely perform phone calls and messaging. Rather, they look for further interactive applications such as video streaming, navigation and real time social interaction. Such applications require a new set of hardware and standards. The WiFi (IEEE 802.11) standard has been at the forefront of reliable and high-speed internet access telecommunications. This is due to its high signal quality (quality of service) and speed (throughput). However, its limited availability and short range highlights the need for further protocols, in particular when far away from access points or base stations. This led to the emergence of 3G followed by 4G and the upcoming 5G standard that, if fully realised, will provide another dimension in “anywhere, anytime internet connectivity.” On the other hand, the WiMAX (IEEE 802.16) standard promises to exceed the WiFi signal coverage range. The coverage range could be extended to kilometres at least with a better or similar WiFi signal level. This thesis considers a dynamically reconfigurable architecture that is capable of processing various modules within telecommunications systems. Forward error correction, coder and navigation modules are deployed in a unified low power communication platform. These modules have been selected since they are among those with the highest demand in terms of processing power, strict processing time or throughput. The modules are mainly realised within WiFi and WiMAX systems in addition to global positioning systems (GPS). The idea behind the selection of these modules is to investigate the possibility of designing an architecture capable of processing various systems and dynamically reconfiguring between them. The GPS system is a power-hungry application and, at the same time, it is not needed all of the time. Hence, one key idea presented in this thesis is to effectively exploit the dynamic reconfiguration capability so as to reconfigure the architecture (GPS) when it is not needed in order to process another needed application or function such as WiFi or WiMAX. This will allow lower energy consumption and the optimum usage of the hardware available on the device. This work investigates the major current coarse-grain reconfigurable architectures. A novel multi-rate convolution encoder is then designed and realised as a reconfigurable fabric. This demonstrates the ability to adapt the algorithms involved to meet various requirements. A throughput of between 200 and 800 Mbps has been achieved for the rates 1/2 to 7/8, which is a great achievement for the proposed novel architecture. A reconfigurable interleaver is designed as a standalone fabric and on a dynamically reconfigurable processor. High throughputs exceeding 90 Mbps are achieved for the various supported block sizes. The Reed Solomon coder is the next challenging system to be designed into a dynamically reconfigurable processor. A novel Galois Field multiplier is designed and integrated into the developed Reed Solomon reconfigurable processor. As a result of this work, throughputs of 200Mbps and 93Mbps respectively for RS encoding and decoding are achieved. A GPS correlation module is also investigated in this work. This is the main part of the GPS receiver responsible for continuously tracking GPS satellites and extracting messages from them. The challenging aspect of this part is its real-time nature and the associated critical time constraints. This work resulted in a novel dynamically reconfigurable multi-channel GPS correlator with up to 72 simultaneous channels. This work is a contribution towards a global unified processing platform that is capable of processing communication-related operations efficiently and dynamically with minimum energy consumption

Speed-up run-time reconfiguration implementation on FPGAs

International audienceReconfigurable computing is certainly one of the most important emerging research topics over the last few years, in the field of digital processing architectures. The introduction of run-time reconfiguration (RTR) on FPGAs requires appropriate design flows and methodologies to fully exploit this new functionality. For that purpose we present an automatic design generation methodology for heterogeneous architectures based on Network on Chip (NoC) and FPGAs that eases and speed-up RTR implementation. We focus on how to take into account specificities of partially reconfigurable components during the design generation steps. This method automatically generates designs for both fixed and partially reconfigurable parts of a FPGA with automaticmanagement of the reconfiguration process. Furthermore this automatic design generation enables reconfiguration pre-fetching techniques to minimize reconfiguration latency and buffer merging techniques to minimize memory requirements of the generated design. This concept has been applied to different wireless access schemes, based on a combination of OFDM and CDMA techniques. The implementation example illustrates the benefits of the proposed design methodology

A VLSI synthesis of a Reed-Solomon processor for digital communication systems

The Reed-Solomon codes have been widely used in digital communication systems such as computer networks, satellites, VCRs, mobile communications and high- definition television (HDTV), in order to protect digital data against erasures, random and burst errors during transmission. Since the encoding and decoding algorithms for such codes are computationally intensive, special purpose hardware implementations are often required to meet the real time requirements. -- One motivation for this thesis is to investigate and introduce reconfigurable Galois field arithmetic structures which exploit the symmetric properties of available architectures. Another is to design and implement an RS encoder/decoder ASIC which can support a wide family of RS codes. -- An m-programmable Galois field multiplier which uses the standard basis representation of the elements is first introduced. It is then demonstrated that the exponentiator can be used to implement a fast inverter which outperforms the available inverters in GF(2m). Using these basic structures, an ASIC design and synthesis of a reconfigurable Reed-Solomon encoder/decoder processor which implements a large family of RS codes is proposed. The design is parameterized in terms of the block length n, Galois field symbol size m, and error correction capability t for the various RS codes. The design has been captured using the VHDL hardware description language and mapped onto CMOS standard cells available in the 0.8-µm BiCMOS design kits for Cadence and Synopsys tools. The experimental chip contains 218,206 logic gates and supports values of the Galois field symbol size m = 3,4,5,6,7,8 and error correction capability t = 1,2,3, ..., 16. Thus, the block length n is variable from 7 to 255. Error correction t and Galois field symbol size m are pin-selectable. -- Since low design complexity and high throughput are desired in the VLSI chip, the algebraic decoding technique has been investigated instead of the time or transform domain. The encoder uses a self-reciprocal generator polynomial which structures the codewords in a systematic form. At the beginning of the decoding process, received words are initially stored in the first-in-first-out (FIFO) buffer as they enter the syndrome module. The Berlekemp-Massey algorithm is used to determine both the error locator and error evaluator polynomials. The Chien Search and Forney's algorithms operate sequentially to solve for the error locations and error values respectively. The error values are exclusive or-ed with the buffered messages in order to correct the errors, as the processed data leave the chip