388 research outputs found
Architecture and Control of a Digital Frequency-Locked Loop for Fine-Grain Dynamic Voltage and Frequency Scaling in Globally Asynchronous Locally Synchronous Structures
International audienceA small area fast-reprogrammable Digital Frequency-Locked Loop (DFLL) engine is presented as a solution for the Dynamic Voltage and Frequency Scaling (DVFS) circuitry in Globally Asynchronous Locally Synchronous (GALS) architectures implemented in 32 nm CMOS technology. The DFLL control is designed so that the closed-loop system is able to cope with process variability while it rejects temperature changes and supply voltage slow variations. Therefore the DFLL is made of three main blocks, namely a Digitally Controlled Oscillator (DCO), a "sensor" that measures the frequency of the signal at the output of the DCO and a controller. A strong emphasis is set on the loop filter architecture choice and the tuning of its parameters. An analytical model of the DCO is deduced from accurate Spice simulations. The delay introduced by the sensor is also taken into account to design. From these models, an optimal and robust controller with a minimum implementation area is developed. Here, "optimal" means that the controller is computed via the minimization of a given criterion while the "robustness" capability ensures that the closed-loop system is tolerant to process and temperature variations in a given range. Therefore, performances of the closed-loop system are ensured whatever the system characteristics are in a given range
Asynchronous techniques for new generation variation-tolerant FPGA
PhD ThesisThis thesis presents a practical scenario for asynchronous logic implementation that would benefit the modern Field-Programmable Gate Arrays (FPGAs) technology in improving reliability. A method based on Asynchronously-Assisted Logic (AAL) blocks is proposed here in order to provide the right degree of variation tolerance, preserve as much of the traditional FPGAs structure as possible, and make use of asynchrony only when necessary or beneficial for functionality. The newly proposed AAL introduces extra underlying hard-blocks that support asynchronous interaction only when needed and at minimum overhead. This has the potential to avoid the obstacles to the progress of asynchronous designs, particularly in terms of area and power overheads. The proposed approach provides a solution that is complementary to existing variation tolerance techniques such as the late-binding technique, but improves the reliability of the system as well as reducing the designâs margin headroom when implemented on programmable logic devices (PLDs) or FPGAs. The proposed method suggests the deployment of configurable AAL blocks to reinforce only the variation-critical paths (VCPs) with the help of variation maps, rather than re-mapping and re-routing. The layout level results for this method's worst case increase in the CLBâs overall size only of 6.3%. The proposed strategy retains the structure of the global interconnect resources that occupy the lionâs share of the modern FPGAâs soft fabric, and yet permits the dual-rail
iv
completion-detection (DR-CD) protocol without the need to globally double the interconnect resources. Simulation results of global and interconnect voltage variations demonstrate the robustness of the method
Recommended from our members
Network-on-Chip Synchronization
Technology scaling has enabled the number of cores within a System on Chip (SoC) to increase significantly. Globally Asynchronous Locally Synchronous (GALS) systems using Dynamic Voltage and Frequency Scaling (DVFS) operate each of these cores on distinct and dynamic clock domains. The main communication method between these cores is increasingly more likely to be a Network-on-Chip (NoC). Typically, the interfaces between these clock domains experience multi-cycle synchronization latencies due to their use of âbrute-forceâ synchronizers. This dissertation aims to improve the performance of NoCs and thereby SoCs as a whole by reducing this synchronization latency.
First, a survey of NoC improvement techniques is presented. One such improvement technique: a multi-layer NoC, has been successfully simulated. Given how one of the most commonly used techniques is DVFS, a thorough analysis and simulation of brute-force synchronizer circuits in both current and future process technologies is presented. Unfortunately, a multi-cycle latency is unavoidable when using brute-force synchronizers, so predictive synchronizers which require only a single cycle of latency have been proposed.
To demonstrate the impact of these predictive synchronizer circuits at a high level, multi-core system simulations incorporating these circuits have been completed. Multiple forms of GALS NoC configurations have been simulated, including multi-synchronous, NoC-synchronous, and single-synchronizer. Speedup on the SPLASH benchmark suite was measured to directly quantify the performance benefit of predictive synchronizers in a full system. Additionally, Mean Time Between Failures (MTBF) has been calculated for each NoC synchronizer configuration to determine the reliability benefit possible when using predictive synchronizers
A Survey on Low-Power Techniques with Emerging Technologies: From Devices to Systems
Nowadays, power consumption is one of the main limitations of electronic systems. In this context, novel and emerging devices provide us with new opportunities to keep the trend to low-power design. In this survey paper, we present a transversal survey on energy efficient techniques ranging from devices to architectures. The actual trends of device research, with fully-depleted planar devices, tri-gate geometries and gate-all-around structures, allows us to reach an increasingly higher level of performance while reducing the associated power. In addition, beyond the simple device properties enhancements, emerging devices also lead to innovations at circuit and architectural levels. In particular, devices whose properties can be tuned through additional terminals enable a fine and dynamic control of device threshold. They also enable designers to realize logic gates and to implement power-related techniques in a compact way unreachable to standard technologies. These innovations reduce the power consumption at the gate level and unlock new means of actuation in architectural solutions like adaptive voltage and frequency scaling
Circuit design and analysis for on-FPGA communication systems
On-chip communication system has emerged as a prominently important subject in Very-Large-
Scale-Integration (VLSI) design, as the trend of technology scaling favours logics more than interconnects.
Interconnects often dictates the system performance, and, therefore, research for new
methodologies and system architectures that deliver high-performance communication services
across the chip is mandatory. The interconnect challenge is exacerbated in Field-Programmable
Gate Array (FPGA), as a type of ASIC where the hardware can be programmed post-fabrication.
Communication across an FPGA will be deteriorating as a result of interconnect scaling. The programmable
fabrics, switches and the specific routing architecture also introduce additional latency
and bandwidth degradation further hindering intra-chip communication performance.
Past research efforts mainly focused on optimizing logic elements and functional units in FPGAs.
Communication with programmable interconnect received little attention and is inadequately understood.
This thesis is among the first to research on-chip communication systems that are built on
top of programmable fabrics and proposes methodologies to maximize the interconnect throughput
performance. There are three major contributions in this thesis: (i) an analysis of on-chip
interconnect fringing, which degrades the bandwidth of communication channels due to routing
congestions in reconfigurable architectures; (ii) a new analogue wave signalling scheme that significantly
improves the interconnect throughput by exploiting the fundamental electrical characteristics
of the reconfigurable interconnect structures. This new scheme can potentially mitigate
the interconnect scaling challenges. (iii) a novel Dynamic Programming (DP)-network to provide
adaptive routing in network-on-chip (NoC) systems. The DP-network architecture performs runtime
optimization for route planning and dynamic routing which, effectively utilizes the in-silicon
bandwidth. This thesis explores a new horizon in reconfigurable system design, in which new
methodologies and concepts are proposed to enhance the on-FPGA communication throughput
performance that is of vital importance in new technology processes
The Fifth NASA Symposium on VLSI Design
The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design
Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)
ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability
- âŠ