Mocarabe: High-Performance Time-Multiplexed Overlays for FPGAs

Coarse-grained reconfigurable array (CGRA) overlays can improve dataflow kernel throughput by an order of magnitude over Vivado HLS on Xilinx Alveo U280. This is possible with a combination of carefully floorplanned high-frequency (645 - 768 MHz Torus, 788 - 856 MHz Mesh, 583 - 746 MHz BFT) design and a scalable, communication-aware compiler. Our CGRA architecture supports configurable Processing Element (PE) functionality supported by a configurable number of communication channels to match application demands. Compared to recent FPGA overlays like 4×4 ADRES and HyCUBE implementations in CGRA-ME, our design operates at a faster clock frequency by up to 3.4×, while scaling to an orders-of-magnitude larger array size of 19×69 on Xilinx Alveo U280. We propose a novel topology agnostic ILP placer that formulates the CGRA placement problem into an ILP problem. Our ILP placer optimizes placement regardless of topology and even for non-linear objective functions by using pre-computed placement costs as inputs to the ILP problem formulation. Using the ILP placer reduces placement quadratic wirelength up to 37% compared to the commonly used simulated annealing approach but increases runtime from less than a minute to hours. Our communication-aware compiler targets HLS objectives such as initiation interval (II) and minimizes communication cost using an integer linear programming (ILP) formulation. Unlike SDC schedulers in FPGA HLS tools, we treat data movement as a first-class citizen by encoding the space and time resources of the communication network in the ILP formulation. Given the same constraints on operational resources as Vivado HLS, we can retain our target II and achieve up to 9.2× higher frequency. We compare Torus and Mesh topologies, and show Mesh has less latency per area compared to Torus for the same benchmarks

Runtime Hardware Reconfiguration in Wireless Sensor Networks for Condition Monitoring

The integration of miniaturized heterogeneous electronic components has enabled the deployment of tiny sensing platforms empowered by wireless connectivity known as wireless sensor networks. Thanks to an optimized duty-cycled activity, the energy consumption of these battery-powered devices can be reduced to a level where several years of operation is possible. However, the processing capability of currently available wireless sensor nodes does not scale well with the observation of phenomena requiring a high sampling resolution. The large amount of data generated by the sensors cannot be handled efficiently by low-power wireless communication protocols without a preliminary filtering of the information relevant for the application. For this purpose, energy-efficient, flexible, fast and accurate processing units are required to extract important features from the sensor data and relieve the operating system from computationally demanding tasks. Reconfigurable hardware is identified as a suitable technology to fulfill these requirements, balancing implementation flexibility with performance and energy-efficiency. While both static and dynamic power consumption of field programmable gate arrays has often been pointed out as prohibitive for very-low-power applications, recent programmable logic chips based on non-volatile memory appear as a potential solution overcoming this constraint. This thesis first verifies this assumption with the help of a modular sensor node built around a field programmable gate array based on Flash technology. Short and autonomous duty-cycled operation combined with hardware acceleration efficiently drop the energy consumption of the device in the considered context. However, Flash-based devices suffer from restrictions such as long configuration times and limited resources, which reduce their suitability for complex processing tasks. A template of a dynamically reconfigurable architecture built around coarse-grained reconfigurable function units is proposed in a second part of this work to overcome these issues. The module is conceived as an overlay of the sensor node FPGA increasing the implementation flexibility and introducing a standardized programming model. Mechanisms for virtual reconfiguration tailored for resource-constrained systems are introduced to minimize the overhead induced by this genericity. The definition of this template architecture leaves room for design space exploration and application- specific customization. Nevertheless, this aspect must be supported by appropriate design tools which facilitate and automate the generation of low-level design files. For this purpose, a software tool is introduced to graphically configure the architecture and operation of the hardware accelerator. A middleware service is further integrated into the wireless sensor network operating system to bridge the gap between the hardware and the design tools, enabling remote reprogramming and scheduling of the hardware functionality at runtime. At last, this hardware and software toolchain is applied to real-world wireless sensor network deployments in the domain of condition monitoring. This category of applications often require the complex analysis of signals in the considered range of sampling frequencies such as vibrations or electrical currents, making the proposed system ideally suited for the implementation. The flexibility of the approach is demonstrated by taking examples with heterogeneous algorithmic specifications. Different data processing tasks executed by the sensor node hardware accelerator are modified at runtime according to application requests

Just In Time Assembly (JITA) - A Run Time Interpretation Approach for Achieving Productivity of Creating Custom Accelerators in FPGAs

The reconfigurable computing community has yet to be successful in allowing programmers to access FPGAs through traditional software development flows. Existing barriers that prevent programmers from using FPGAs include: 1) knowledge of hardware programming models, 2) the need to work within the vendor specific CAD tools and hardware synthesis. This thesis presents a series of published papers that explore different aspects of a new approach being developed to remove the barriers and enable programmers to compile accelerators on next generation reconfigurable manycore architectures. The approach is entitled Just In Time Assembly (JITA) of hardware accelerators. The approach has been defined to allow hardware accelerators to be built and run through software compilation and run time interpretation outside of CAD tools and without requiring each new accelerator to be synthesized. The approach advocates the use of libraries of pre-synthesized components that can be referenced through symbolic links in a similar fashion to dynamically linked software libraries. Synthesis still must occur but is moved out of the application programmers software flow and into the initial coding process that occurs when programming patterns that define a Domain Specific Language (DSL) are first coded. Programmers see no difference between creating software or hardware functionality when using the DSL. A new run time interpreter is introduced to assemble the individual pre-synthesized hardware accelerators that comprise the accelerator functionality within a configurable tile array of partially reconfigurable slots at run time. Quantitative results are presented that compares utilization, performance, and productivity of the approach to what would be achieved by full custom accelerators created through traditional CAD flows using hardware programming models and passing through synthesis

Power and Energy Aware Heterogeneous Computing Platform

During the last decade, wireless technologies have experienced significant development, most notably in the form of mobile cellular radio evolution from GSM to UMTS/HSPA and thereon to Long-Term Evolution (LTE) for increasing the capacity and speed of wireless data networks. Considering the real-time constraints of the new wireless standards and their demands for parallel processing, reconfigurable architectures and in particular, multicore platforms are part of the most successful platforms due to providing high computational parallelism and throughput. In addition to that, by moving toward Internet-of-Things (IoT), the number of wireless sensors and IP-based high throughput network routers is growing at a rapid pace. Despite all the progression in IoT, due to power and energy consumption, a single chip platform for providing multiple communication standards and a large processing bandwidth is still missing.The strong demand for performing different sets of operations by the embedded systems and increasing the computational performance has led to the use of heterogeneous multicore architectures with the help of accelerators for computationally-intensive data-parallel tasks acting as coprocessors. Currently, highly heterogeneous systems are the most power-area efficient solution for performing complex signal processing systems. Additionally, the importance of IoT has increased significantly the need for heterogeneous and reconfigurable platforms.On the other hand, subsequent to the breakdown of the Dennardian scaling and due to the enormous heat dissipation, the performance of a single chip was obstructed by the utilization wall since all cores cannot be clocked at their maximum operating frequency. Therefore, a thermal melt-down might be happened as a result of high instantaneous power dissipation. In this context, a large fraction of the chip, which is switched-off (Dark) or operated at a very low frequency (Dim) is called Dark Silicon. The Dark Silicon issue is a constraint for the performance of computers, especially when the up-coming IoT scenario will demand a very high performance level with high energy efficiency. Among the suggested solution to combat the problem of Dark-Silicon, the use of application-specific accelerators and in particular Coarse-Grained Reconfigurable Arrays (CGRAs) are the main motivation of this thesis work.This thesis deals with design and implementation of Software Defined Radio (SDR) as well as High Efficiency Video Coding (HEVC) application-specific accelerators for computationally intensive kernels and data-parallel tasks. One of the most important data transmission schemes in SDR due to its ability of providing high data rates is Orthogonal Frequency Division Multiplexing (OFDM). This research work focuses on the evaluation of Heterogeneous Accelerator-Rich Platform (HARP) by implementing OFDM receiver blocks as designs for proof-of-concept. The HARP template allows the designer to instantiate a heterogeneous reconfigurable platform with a very large amount of custom-tailored computational resources while delivering a high performance in terms of many high-level metrics. The availability of this platform lays an excellent foundation to investigate techniques and methods to replace the Dark or Dim part of chip with high-performance silicon dissipating very low power and energy. Furthermore, this research work is also addressing the power and energy issues of the embedded computing systems by tailoring the HARP for self-aware and energy-aware computing models. In this context, the instantaneous power dissipation and therefore the heat dissipation of HARP are mitigated on FPGA/ASIC by using Dynamic Voltage and Frequency Scaling (DVFS) to minimize the dark/dim part of the chip. Upgraded HARP for self-aware and energy-aware computing can be utilized as an energy-efficient general-purpose transceiver platform that is cognitive to many radio standards and can provide high throughput while consuming as little energy as possible. The evaluation of HARP has shown promising results, which makes it a suitable platform for avoiding Dark Silicon in embedded computing platforms and also for diverse needs of IoT communications.In this thesis, the author designed the blocks of OFDM receiver by crafting templatebased CGRA devices and then attached them to HARP’s Network-on-Chip (NoC) nodes. The performance of application-specific accelerators generated from templatebased CGRAs, the performance of the entire platform subsequent to integrating the CGRA nodes on HARP and the NoC traffic are recorded in terms of several highlevel performance metrics. In evaluating HARP on FPGA prototype, it delivers a performance of 0.012 GOPS/mW. Because of the scalability and regularity in HARP, the author considered its value as architectural constant. In addition to showing the gain and the benefits of maximizing the number of reconfigurable processing resources on a platform in comparison to the scaled performance of several state-of-the-art platforms, HARP’s architectural constant ensures application-independent figure of merit. HARP is further evaluated by implementing various sizes of Discrete Cosine transform (DCT) and Discrete Sine Transform (DST) dedicated for HEVC standard, which showed its ability to sustain Full HD 1080p format at 30 fps on FPGA. The author also integrated self-aware computing model in HARP to mitigate the power dissipation of an OFDM receiver. In the case of FPGA implementation, the total power dissipation of the platform showed 16.8% reduction due to employing the Feedback Control System (FCS) technique with Dynamic Frequency Scaling (DFS). Furthermore, by moving to ASIC technology and scaling both frequency and voltage simultaneously, significant dynamic power reduction (up to 82.98%) was achieved, which proved the DFS/DVFS techniques as one step forward to mitigate the Dark Silicon issue

Optimization of the Memory Subsystem of a Coarse Grained Reconfigurable Hardware Accelerator

Fast and energy efficient processing of data has always been a key requirement in processor design. The latest developments in technology emphasize these requirements even further. The widespread usage of mobile devices increases the demand of energy efficient solutions. Many new applications like advanced driver assistance systems focus more and more on machine learning algorithms and have to process large data sets in hard real time. Up to the 1990s the increase in processor performance was mainly achieved by new and better manufacturing technologies for processors. That way, processors could operate at higher clock frequencies, while the processor microarchitecture was mainly the same. At the beginning of the 21st century this development stopped. New manufacturing technologies made it possible to integrate more processor cores onto one chip, but almost no improvements were achieved anymore in terms of clock frequencies. This required new approaches in both processor microarchitecture and software design. Instead of improving the performance of a single processor, the current problem has to be divided into several subtasks that can be executed in parallel on different processing elements which speeds up the application. One common approach is to use multi-core processors or GPUs (Graphic Processing Units) in which each processing element calculates one subtask of the problem. This approach requires new programming techniques and legacy software has to be reformulated. Another approach is the usage of hardware accelerators which are coupled to a general purpose processor. For each problem a dedicated circuit is designed which can solve the problem fast and efficiently. The actual computation is then executed on the accelerator and not on the general purpose processor. The disadvantage of this approach is that a new circuit has to be designed for each problem. This results in an increased design effort and typically the circuit can not be adapted once it is deployed. This work covers reconfigurable hardware accelerators. They can be reconfigured during runtime so that the same hardware is used to accelerate different problems. During runtime, time consuming code fragments can be identified and the processor itself starts a process that creates a configuration for the hardware accelerator. This configuration can now be loaded and the code will then be executed on the accelerator faster and more efficient. A coarse grained reconfigurable architecture was chosen because creating a configuration for it is much less complex than creating a configuration for a fine grained reconfigurable architecture like an FPGA (Field Programmable Gate Array). Additionally, the smaller overhead for the reconfigurability results in higher clock frequencies. One advantage of this approach is that programmers don't need any knowledge about the underlying hardware, because the acceleration is done automatically during runtime. It is also possible to accelerate legacy code without user interaction (even when no source code is available anymore). One challenge that is relevant for all approaches, is the efficient and fast data exchange between processing elements and main memory. Therefore, this work concentrates on the optimization of the memory interface between the coarse grained reconfigurable hardware accelerator and the main memory. To achieve this, a simulator for a Java processor coupled with a coarse grained reconfigurable hardware accelerator was developed during this work. Several strategies were developed to improve the performance of the memory interface. The solutions range from different hardware designs to software solutions that try to optimize the usage of the memory interface during the creation of the configuration of the accelerator. The simulator was used to search the design space for the best implementation. With this optimization of the memory interface a performance improvement of 22.6% was achieved. Apart from that, a first prototype of this kind of accelerator was designed and implemented on an FPGA to show the correct functionality of the whole approach and the simulator

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

Exploiting tightly-coupled cores

As we move steadily through the multicore era, and the number of processing cores on each chip continues to rise, parallel computation becomes increasingly important. However, parallelising an application is often difficult because of dependencies between different regions of code which require cores to communicate. Communication is usually slow compared to computation, and so restricts the opportunities for profitable parallelisation. In this work, I explore the opportunities provided when communication between cores has a very low latency and low energy cost. I observe that there are many different ways in which multiple cores can be used to execute a program, allowing more parallelism to be exploited in more situations, and also providing energy savings in some cases. Individual cores can be made very simple and efficient because they do not need to exploit parallelism internally. The communication patterns between cores can be updated frequently to reflect the parallelism available at the time, allowing better utilisation than specialised hardware which is used infrequently. In this dissertation I introduce Loki: a homogeneous, tiled architecture made up of many simple, tightly-coupled cores. I demonstrate the benefits in both performance and energy consumption which can be achieved with this arrangement and observe that it is also likely to have lower design and validation costs and be easier to optimise. I then determine exactly where the performance bottlenecks of the design are, and where the energy is consumed, and look into some more-advanced optimisations which can make parallelism even more profitable

High-level FPGA accelerator design for structured-mesh-based numerical solvers

Field Programmable Gate Arrays (FPGAs) have become highly attractive as accelerators due to their low power consumption and re-programmability. However, a key limitation is the time and know-how required to program them. Even with high-level synthesis tools, they still require significant hand-tuned/low-level customizations and design space exploration to gain good performance. The need to program FPGAs using the dataflow programming model, much less well known and practised by the high-performance computing (HPC) community, is a major barrier for adoption for HPC. The underlying motivation of this work is to bridge this gap - attaining near-optimal performance vs the ease of programming. To this end, we target the important class of applications based on structured meshes, focusing on numerical algorithms based on explicit and implicit techniques. We leverage the main characteristics of the application class, its computation-communication pattern and the hardware features. For explicit schemes, characterized by stencil computations, we unify the state-of-the-art techniques such as vectorization and unrolling with a number of new high-gain optimizations such as creating perfect data reuse data-paths, batching and tiling. A key new feature is their applicability to multiple stencil loops enabling the development of real-world workloads. For implicit schemes, we re-evaluate the characteristics of the tridiagonal system solver algorithms for FPGAs and develop a new high throughput batched multi-dimensional tridiagonal system solver library with orders of magnitude better performance than the state-of-the-art. New analytic models are developed to support the solvers, elucidating and modelling the critical path of execution and parameterizing the design. This together with the optimal designs and new library lead to a unified design work-flow for synthesis on FPGAs. The new workflow is used to implement a range of applications, from simple single stencil designs, multiple stencil loops to solvers with real-world utility. They are synthesized on the currently dominant Xilinx and Intel FPGAs. Benchmarking indicate the FPGAs matching or outperforming the best GPU implementations, the current best traditional architecture device solution. Over 30% energy saving can also be observed. The performance model demonstrates over 85% accuracy. The thesis discusses the determinants for these applications to be amenable for FPGA implementation, providing insights into the feasibility and profitability of a design. Finally we propose initial steps in automating the workflow to be used through a DSL

Kommunikation und Bildverarbeitung in der Automation

In diesem Open-Access-Tagungsband sind die besten Beiträge des 9. Jahreskolloquiums "Kommunikation in der Automation" (KommA 2018) und des 6. Jahreskolloquiums "Bildverarbeitung in der Automation" (BVAu 2018) enthalten. Die Kolloquien fanden am 20. und 21. November 2018 in der SmartFactoryOWL, einer gemeinsamen Einrichtung des Fraunhofer IOSB-INA und der Technischen Hochschule Ostwestfalen-Lippe statt. Die vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschaulichen Beispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug