Thermal and Mechanical Energy Harvesting Using Lead Sulfide Colloidal Quantum Dots

The human body is an abundant source of energy in the form of heat and mechanical movement. The ability to harvest this energy can be useful for supplying low-consumption wearable and implantable devices. Thermoelectric materials are usually used to harvest human body heat for wearable devices; however, thermoelectric generators require temperature gradient across the device to perform appropriately. Since they need to attach to the heat source to absorb the heat, temperature equalization decreases their efficiencies. Moreover, the electrostatic energy harvester, working based on the variable capacitor structure, is the most compatible candidate for harvesting low-frequency-movement of the human body. Although it can provide a high output voltage and high-power density at a small scale, they require an initial start-up voltage source to charge the capacitor for initiating the conversion process. The current methods for initially charging the variable capacitor suffer from the complexity of the design and fabrication process. In this research, a solution-processed photovoltaic structure was proposed to address the temperature equalization problem of the thermoelectric generators by harvesting infrared radiations emitted from the human body. However, normal photovoltaic devices have the bandgap limitation to absorb low energy photons radiated from the human body. In this structure, mid-gap states were intentionally introduced to the absorbing layer to activate the multi-step photon absorption process enabling electron promotion from the valence band to the conduction band. The fabricated device showed promising performance in harvesting low energy thermal radiations emitted from the human body. Finally, in order to increase the generated power, a hybrid structure was proposed to harvest both mechanical and heat energy sources available in the human body. The device is designed to harvest both the thermal radiation of the human body based on the proposed solution-processed photovoltaic structure and the mechanical movement of the human body based on an electrostatic generator. The photovoltaic structure was used to charge the capacitor at the initial step of each conversion cycle. The simple fabrication process of the photovoltaic device can potentially address the problem associated with the charging method of the electrostatic generators. The simulation results showed that the combination of two methods can significantly increase the harvested energy

Roadmap on energy harvesting materials

Ambient energy harvesting has great potential to contribute to sustainable development and address growing environmental challenges. Converting waste energy from energy-intensive processes and systems (e.g. combustion engines and furnaces) is crucial to reducing their environmental impact and achieving net-zero emissions. Compact energy harvesters will also be key to powering the exponentially growing smart devices ecosystem that is part of the Internet of Things, thus enabling futuristic applications that can improve our quality of life (e.g. smart homes, smart cities, smart manufacturing, and smart healthcare). To achieve these goals, innovative materials are needed to efficiently convert ambient energy into electricity through various physical mechanisms, such as the photovoltaic effect, thermoelectricity, piezoelectricity, triboelectricity, and radiofrequency wireless power transfer. By bringing together the perspectives of experts in various types of energy harvesting materials, this Roadmap provides extensive insights into recent advances and present challenges in the field. Additionally, the Roadmap analyses the key performance metrics of these technologies in relation to their ultimate energy conversion limits. Building on these insights, the Roadmap outlines promising directions for future research to fully harness the potential of energy harvesting materials for green energy anytime, anywhere

Exploration of carbon nanotube composites and piezoelectric materials for implantable devices

This thesis describes an exploration of carbon nanotube (CNT) nanocomposites for application in implantable medical devices. The focus here is on materials and structures of interest as components of devices incorporating electrodes. Electrodes for implantable devices are commonly required to interface between an electrical system, where the charge carriers are electrons presented through a metal, and human tissue, where the charge carriers are ions as well as electrons not in a metal. These interfaces are found to be prone to issues such as fibrosis and rejection. The properties of carbon nanomaterials, piezoelectric peptides/polymers and their composites suggest them as promising candidate materials that could resolve these issues. The superior conductivity, mechanical properties and chemical stability of carbon nanotubes have been explored in recent years for potential application in biomedical sensors and devices. This work has explored piezoelectric materials, carbon nanotubes, polymers and nanocomposites of these as potential components of implantable devices. Diphenylalanine is a chiral, amphiphilic dipeptide molecule which has the ability to self-assemble into piezoelectric microtubules. The self-assembly process of diphenylalanine microtubules has been explored and its properties have been compared to the properties of poly[vinylidenefluoride-co-trifluoroethylene] (P[VDF-TrFE]) electrospun nanofibres. Later parts of this work considered the deposition of electrodes by printing. The development of CNT-polymer nanocomposites as printable inks for the fabrication of electrodes was explored. The structure and properties of the piezoelectric nano/ micro-materials, CNT-peptide complex and conductive CNT-polymer printable inks were characterised by a range of microscopic and spectroscopic techniques. The viability of neural cells on the developed functional materials and electrodes were tested by metabolic activity measurements and immunochemical staining microscopy. A CNT-polymer ink demonstrated good conductivity and dimensional stability when printed by 3D printer. Good biocompatibility of all the functional materials developed have been demonstrated in vitro, showing promise for further development of soft electrodes and applications in nanostructure piezoelectric sensors and implantable devices

Advance in Energy Harvesters/Nanogenerators and Self-Powered Sensors

This reprint is a collection of the Special Issue "Advance in Energy Harvesters/Nanogenerators and Self-Powered Sensors" published in Nanomaterials, which includes one editorial, six novel research articles and four review articles, showcasing the very recent advances in energy-harvesting and self-powered sensing technologies. With its broad coverage of innovations in transducing/sensing mechanisms, material and structural designs, system integration and applications, as well as the timely reviews of the progress in energy harvesting and self-powered sensing technologies, this reprint could give readers an excellent overview of the challenges, opportunities, advancements and development trends of this rapidly evolving field

????????????/???????????? ?????? ?????? ?????? ???????????? ??? ????????? ??????????????????

Department of Energy EngineeringElectronic skins (e-skins) enabling to detect various mechanical/chemical stimuli and environmental conditions by converting into various electrical and optical signals have attracted much attentions for various fields including wearable electronics, intelligent/medical robotics, healthcare monitoring devices, and haptic interfaces. Conventional e-skins have been widely used for the realization of these applications, however it is still considered that new e-skins with enhanced sensor performances (i.e. sensitivity, flexibility, multifunctionality, etc.) should be developed. In accordance with these demands, two approaches to explore novel functional materials or to modify device architectures have been introduced for enhancing sensor performance and acquiring multifunctional sensing capabilities. Firstly, a synthesis of multifunctional materials combined with conductive fillers (carbon nanotube, graphene oxide) and functional polymer matrix (i.e. ferroelectric polymer, elastomer) can provide the multimodal sensing capability of various stimuli and stretchability. Secondly, controlling design of device structures into various micro/nanostructures enables a significant improvement on sensing capabilities of e-skins with sensitivity and multidirectional force sensing, resulting from structural advantages such as large surface area, effective stress propagation, and anisotropic deformation. Therefore, a demonstration of e-skin combined with the functional composites and uniquely designed microstructures can offer a powerful platform to realize ideal sensor systems for next generation applications such as wearable electronics, healthcare devices, acoustic sensor, and haptic interface devices. In this thesis, we introduce the novel multifunctional and high performance electronic skins combined with various types of composite materials and nature-inspired 3D microstructures. Firstly, Chapter 1 briefly introduces various types of e-skins and the latest research trends of microstructured e-skins and summarizes the key components for their promising application fields. In chapters 2 and 3, mimicked by interlocking system between epidermal and dermal layers in human skin, we demonstrate the piezoresistive e-skins based on CNT/PDMS composite materials with interlocked microdome arrays for great pressure sensitivity and multidirectional force sensing capabilities. In chapter 4, we conduct in-depth study on giant tunneling piezoresistance in interlocking system and investigate systematically on the geometrical effect of microstructures on multidirectional force sensitivity and selectivity in interlocking sensor systems. In chapter 5, we demonstrate the ferroelectric e-skin that can detect and discriminate the static/dynamic touches and temperature inspired by multi-stimuli detection of various mechanoreceptors in human skin. Using the multifunctional sensing capabilities, we demonstrated our e-skin to the temperature-dependent pressure monitoring of artery vessel, high-precision acoustic sound detection, and surface texture recognition of various surfaces. In chapter 6, we demonstrate the linear and wide range pressure sensor with multilayered composite films having interlocked microdomes. In chapter 7, we present a new-concept of e-skin based on mechanochromic polymer and porous structures for overcoming limitations in conventional mechanochromic systems with low mechanochromic performances and limited stretchability. In addition, our mechanochromic e-skins enable the dual-mode detection of static and dynamic forces without any external power. Our e-skins based on functional composites and uniquely designed microstructures can provide a solid platform for next generation eskin in wearable electronics, humanoid robotics, flexible sensors, and wearable medical diagnostic systems.clos

New generation of interactive platforms based on novel printed smart materials

Programa doutoral em Engenharia Eletrónica e de Computadores (área de Instrumentação e Microssistemas Eletrónicos)The last decade was marked by the computer-paradigm changing with other digital devices suddenly becoming available to the general public, such as tablets and smartphones. A shift in perspective from computer to materials as the centerpiece of digital interaction is leading to a diversification of interaction contexts, objects and applications, recurring to intuitive commands and dynamic content that can proportionate more interesting and satisfying experiences. In parallel, polymer-based sensors and actuators, and their integration in different substrates or devices is an area of increasing scientific and technological interest, which current state of the art starts to permit the use of smart sensors and actuators embodied within the objects seamlessly. Electronics is no longer a rigid board with plenty of chips. New technological advances and perspectives now turned into printed electronics in polymers, textiles or paper. We are assisting to the actual scaling down of computational power into everyday use objects, a fusion of the computer with the material. Interactivity is being transposed to objects erstwhile inanimate. In this work, strain and deformation sensors and actuators were developed recurring to functional polymer composites with metallic and carbonaceous nanoparticles (NPs) inks, leading to capacitive, piezoresistive and piezoelectric effects, envisioning the creation of tangible user interfaces (TUIs). Based on smart polymer substrates such as polyvinylidene fluoride (PVDF) or polyethylene terephthalate (PET), among others, prototypes were prepared using piezoelectric and dielectric technologies. Piezoresistive prototypes were prepared with resistive inks and restive functional polymers. Materials were printed by screen printing, inkjet printing and doctor blade coating. Finally, a case study of the integration of the different materials and technologies developed is presented in a book-form factor.A última década foi marcada por uma alteração do paradigma de computador pelo súbito aparecimento dos tablets e smartphones para o público geral. A alteração de perspetiva do computador para os materiais como parte central de interação digital levou a uma diversificação dos contextos de interação, objetos e aplicações, recorrendo a comandos intuitivos e conteúdos dinâmicos capazes de tornarem a experiência mais interessante e satisfatória. Em simultâneo, sensores e atuadores de base polimérica, e a sua integração em diferentes substratos ou dispositivos é uma área de crescente interesse científico e tecnológico, e o atual estado da arte começa a permitir o uso de sensores e atuadores inteligentes perfeitamente integrados nos objetos. Eletrónica já não é sinónimo de placas rígidas cheias de componentes. Novas perspetivas e avanços tecnológicos transformaram-se em eletrónica impressa em polímeros, têxteis ou papel. Neste momento estamos a assistir à redução da computação a objetos do dia a dia, uma fusão do computador com a matéria. A interatividade está a ser transposta para objetos outrora inanimados. Neste trabalho foram desenvolvidos atuadores e sensores e de pressão e de deformação com recurso a compostos poliméricos funcionais com tintas com nanopartículas (NPs) metálicas ou de base carbónica, recorrendo aos efeitos capacitivo, piezoresistivo e piezoelétrico, com vista à criação de interfaces de usuário tangíveis (TUIs). Usando substratos poliméricos inteligentes tais como fluoreto de polivinilideno (PVDF) ou politereftalato de etileno (PET), entre outos, foi possível a preparação de protótipos de tecnologia piezoelétrica ou dielétrica. Os protótipos de tecnologia piezoresistiva foram feitos com tintas resistivas e polímeros funcionais resistivos. Os materiais foram impressos por serigrafia, jato de tinta, impressão por aerossol e revestimento de lâmina doctor blade. Para terminar, é apresentado um caso de estudo da integração dos diferentes materiais e tecnologias desenvolvidos sob o formato de um livro.This project was supported by FCT – Fundação para a Ciência e a Tecnologia, within the doctorate grant with reference SFRH/BD/110622/2015, by POCH – Programa Operacional Capital Humano, and by EU – European Union

Growth and characterization of ZnO and SiC nanowires

The synthesis of semiconductor nanowires has been studied intensively worldwide for a wide spectrum of materials. Such low-dimensional nanostructures are not only interesting for fundamental research due to their unique structural and physical properties relative to their bulk counterparts, but also offer fascinating potential for future technological applications. Deeper understanding and sufficient control of the growth of nanowires are central to the current research interest. The objective of the thesis work is synthesizing semiconductor nanowires using various growth processes, with a focus on the spontaneous growth process, which offers an opportunity for the control of spatial positioning of nanowires. Zinc oxide (ZnO) based and Silicon carbide (SiC) based nanowires have been concentrated to synthesize using vapor-solid (VS) and vapor–liquid–solid (VLS) techniques respectively. ZnO is one of very interesting semiconductor material because of its physical and chemical properties. Also, it is well known that high n-type conductivity can be achieved by alloying zinc oxide with group III elements (such as Al, In or Ga) in ternary or even quaternary oxide compounds, in order to obtain transparent conducting oxides (TCOs). In this part of work, there were two major materials have been synthesized such as vertically aligned ZnO nanorods and ternary Zn(In,Ga,Sn)O nanorods using vapor phase technique. First, solution-free and catalyst-free vertically aligned ZnO nanorods have been synthesized by thermal CVD reactor at relatively low temperature (< 500 °C) to produce high-surface 3D photoanode on glass substrate. Different TCOs films such as Al doped ZnO films deposited by PED, RF-sputtering techniques and ITO were considered for the growth as starting seeding layer for the nanorods. The aim of this work is mainly focused to control the thickness and length of these nanostructures by varying not only the growth parameters, such as amount of Zn evaporation, but also substrate characteristics, such as grain size of Al doped ZnO and ITO seeding films. Second, Indium Zinc oxide nanorods (IZO-NRs) have been obtained at temperatures lower than 500°C using same CVD system, with a resulting indium concentration larger than 1%. The growth of these ternary oxide nanostructures has been obtained at relatively low temperature, starting from the corresponding metals, thanks to the direct deposition on the growth substrate of an In layer, which in its molten state and upon mixture with Zn acts as growth seed. The obtained indium concentration corresponds to the value required to get metallic behavior and make this ternary oxide a TCO (transparent conducting oxide), while the used temperature range makes it compatible also with commercial glass substrates. Same technique have been used to obtain GaZnO and SnZnO nanostructures. Among many kind of semiconductor, SiC is an important wide band gap IV-IV semiconducting material and it exhibit excellent, unique physical and mechanical properties at nano-scale, which lead to their potential applications for being used as the building blocks in nanoelectronics and nanooptoelectronics. Also, it has biocompatibility and inertness can be exploited for biomedical applications. In this part of work, there were two types of SiC nanowires have been synthesized using VLS growth technique. First, Cubic SiC nanowires were successfully grown using home-made induction heated Vapor Phase Epitaxy (VPE) reactor on Si (100) and Si (111) substrate using nickel (Ni) and Iron (Fe) as a catalysts. The main aim of this work is to optimize the condition to grow SiC nanowires with Ni and Fe catalyst. The size and shape of the nanowires has been controlled using temperature and gas flow rate. Second, self-assembled SiC core with SiO2 shell coaxial nanowires using Ni and Fe catalyst have been synthesized by thermal CVD reactor. The growth conditions were optimized for both catalyst using temperature, gas flow rate. This SiC /SiO2 coaxial core/shell nanowires (NWs) are intriguing as novel nanostructured to be functionalized because of the 3C-SiC biocompatibility and of the presence of a SiO2 native shell that favours surface functionalization. Those findings are encouraging in the prospective to employ this functionalized system for different nano-medical applications such as targeted therapy against deep tumor cells