From FPGA to ASIC: A RISC-V processor experience

This work document a correct design flow using these tools in the Lagarto RISC- V Processor and the RTL design considerations that must be taken into account, to move from a design for FPGA to design for ASIC

Advances in Architectures and Tools for FPGAs and their Impact on the Design of Complex Systems for Particle Physics

The continual improvement of semiconductor technology has provided rapid advancements in device frequency and density. Designers of electronics systems for high-energy physics (HEP) have benefited from these advancements, transitioning many designs from fixed-function ASICs to more flexible FPGA-based platforms. Today’s FPGA devices provide a significantly higher amount of resources than those available during the initial Large Hadron Collider design phase. To take advantage of the capabilities of future FPGAs in the next generation of HEP experiments, designers must not only anticipate further improvements in FPGA hardware, but must also adopt design tools and methodologies that can scale along with that hardware. In this paper, we outline the major trends in FPGA hardware, describe the design challenges these trends will present to developers of HEP electronics, and discuss a range of techniques that can be adopted to overcome these challenges

Energy-efficient hardware design based on high-level synthesis

This dissertation describes research activities broadly concerning the area of High-level synthesis (HLS), but more specifically, regarding the HLS-based design of energy-efficient hardware (HW) accelerators. HW accelerators, mostly implemented on FPGAs, are integral to the heterogeneous architectures employed in modern high performance computing (HPC) systems due to their ability to speed up the execution while dramatically reducing the energy consumption of computationally challenging portions of complex applications. Hence, the first activity was regarding an HLS-based approach to directly execute an OpenCL code on an FPGA instead of its traditional GPU-based counterpart. Modern FPGAs offer considerable computational capabilities while consuming significantly smaller power as compared to high-end GPUs. Several different implementations of the K-Nearest Neighbor algorithm were considered on both FPGA- and GPU-based platforms and their performance was compared. FPGAs were generally more energy-efficient than the GPUs in all the test cases. Eventually, we were also able to get a faster (in terms of execution time) FPGA implementation by using an FPGA-specific OpenCL coding style and utilizing suitable HLS directives. The second activity was targeted towards the development of a methodology complementing HLS to automatically derive power optimization directives (also known as "power intent") from a system-level design description and use it to drive the design steps after HLS, by producing a directive file written using the common power format (CPF) to achieve power shut-off (PSO) in case of an ASIC design. The proposed LP-HLS methodology reduces the design effort by enabling designers to infer low power information from the system-level description of a design rather than at the RTL. This methodology required a SystemC description of a generic power management module to describe the design context of a HW module also modeled in SystemC, along with the development of a tool to automatically produce the CPF file to accomplish PSO. Several test cases were considered to validate the proposed methodology and the results demonstrated its ability to correctly extract the low power information and apply it to achieve power optimization in the backend flow

Design of high-speed and low-power finite-word-length PID controllers.

International audienceASIC or FPGA implementation of a finite word-length PID controller requires a double expertise : in control system and hardware design. In this paper, we only focus on the hardware side of the problem. We show how to design configurable fixed-point PIDs to satisfy application srequiring minimal power consumption, or high control-rate, or both together. As multiply operation is the engine of PID, we experienced three algorithms : Booth, modified Booth, and a new recursive multi-bit multiplication algorithm. This later enables the construction of finely grained PID structures with bit-velvel and unit-time precsion. Such a feature permits to tailor the PID to the desired performance and power budget. All PIDs are emplemented at register-transfer-level (RTL) level as technology-independent reusable IP-cores. They are reconfigurable according to two compile-time constants : set-point word-length and latency. To make PID design easily reproducible, all necessary implementation details are provided and discussed

Hardware implementation of non-bonded forces in molecular dynamics simulations

Molecular Dynamics is a computational method based on classical mechanics to describe the behavior of a molecular system. This method is used in biomolecular simulations, which are intended to contribute to the study and advance of nanotechnology, medicine, chemistry and biology. Software implementations of Molecular Dynamics simulations can spend most of time computing the non-bonded interactions. This work presents the design and implementation of an FPGA-based coprocessor that accelerates MD simulations by computing in parallel the non-bonded interactions, specifically, the van der Waals and the electrostatic interactions. These interactions are modeled as the Lennard-Jones 6-12 potential and the direct-space Ewald summation, respectively. In addition, this work introduces a novel variable transformation of the potential energy functions, and a novel interpolation method with pseudo-floating-point representation to compute the short-range forces. Also, it uses a combination of fixed-point and floating-point arithmetic to obtain the best of both representations. The FPGA coprocessor is a memory-mapped system connected to a host by PCI Express, and is provided with interruption capabilities to improve parallelization. Its main block is based on a single functional pipeline, and is connected via Avalon Bus to other peripherals such as the PCIe Hard-IP and the SG-DMA. It is implemented on an Altera¿s EP2AGX125EF35C4 device, can process 16k particles, and is configured to store up to 16 different types of particles. Simulations in a custom C-application for MD that only computes non-bonded forces become up to 12.5x faster using the FPGA coprocessor when considering 12500 atoms.PregradoINGENIERO(A) EN ELECTRÓNIC