All CVD Boron Nitride Encapsulated Graphene FETs with CMOS Compatible Metal Edge Contacts

We report on the fabrication and characterization of field effect transistors (FETs) based on chemical vapor deposited (CVD) graphene encapsulated between few layer CVD boron nitride (BN) sheets with complementary metal oxide semiconductor (CMOS) compatible nickel edge contacts. Non-contact Tera-hertz time domain spectroscopy (THz-TDS) of large-area BN/graphene/BN (BN/G/BN) stacks reveals average sheet conductivity >1 mS/sq and average mobility of 2500 cm$^{2}$/Vs. Improved output conductance is observed in direct current (DC) measurements under ambient conditions, indicating potential for radio-frequency (RF) applications. Moreover, we report a maximum voltage gain of 6 dB from a low frequency signal amplifier circuit. RF characterization of the GFETs yields an f$_{T}$ x L$_{g}$ product of 2.64 GHz$\mu$m and an f$_{Max}$ x L$_{g}$ product of 5.88 GHz$\mu$m. This study presents for the first time THz-TDS usage in combination with other characterization methods for device performance assessment on BN/G/BN stacks. The results serve as a step towards scalable, all CVD 2D material-based FETs for CMOS compatible future nanoelectronic circuit architectures.Comment: 6 page

Scalability of the channel capacity in graphene-enabled wireless communications to the nanoscale

Graphene is a promising material which has been proposed to build graphene plasmonic miniaturized antennas, or graphennas, which show excellent conditions for the propagation of Surface Plasmon Polariton (SPP) waves in the terahertz band. Due to their small size of just a few micrometers, graphennas allow the implementation of wireless communications among nanosystems, leading to a novel paradigm known as Graphene-enabled Wireless Communications (GWC). In this paper, an analytical framework is developed to evaluate how the channel capacity of a GWC system scales as its dimensions shrink. In particular, we study how the unique propagation of SPP waves in graphennas will impact the channel capacity. Next, we further compare these results with respect to the case when metallic antennas are used, in which these plasmonic effects do not appear. In addition, asymptotic expressions for the channel capacity are derived in the limit when the system dimensions tend to zero. In this scenario, necessary conditions to ensure the feasibility of GWC networks are found. Finally, using these conditions, new guidelines are derived to explore the scalability of various parameters, such as transmission range and transmitted power. These results may be helpful for designers of future GWC systems and networks.Peer ReviewedPostprint (author’s final draft

Gain-Reconfigurable Hybrid Metal-Graphene Printed Yagi Antenna for Energy Harvesting Applications

This paper presents a hybrid metal-graphene printed Yagi antenna with reconfigurable gain that operates in the 5.5-GHz band. The balun and the driven elements are made of copper, while the directors are made of graphene. The graphene acts as a tunable material in the design. By switching the conductivity of the graphene, it is achieved a similar effect to adding or subtracting directors in the antenna. Hence the gain of the printed Yagi can be easily controlled. This could be of special interest in RF energy harvesting in the design of reconfigurable harvesting elements.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech