7,808 research outputs found
Design of multimedia processor based on metric computation
Media-processing applications, such as signal processing, 2D and 3D graphics
rendering, and image compression, are the dominant workloads in many embedded
systems today. The real-time constraints of those media applications have
taxing demands on today's processor performances with low cost, low power and
reduced design delay. To satisfy those challenges, a fast and efficient
strategy consists in upgrading a low cost general purpose processor core. This
approach is based on the personalization of a general RISC processor core
according the target multimedia application requirements. Thus, if the extra
cost is justified, the general purpose processor GPP core can be enforced with
instruction level coprocessors, coarse grain dedicated hardware, ad hoc
memories or new GPP cores. In this way the final design solution is tailored to
the application requirements. The proposed approach is based on three main
steps: the first one is the analysis of the targeted application using
efficient metrics. The second step is the selection of the appropriate
architecture template according to the first step results and recommendations.
The third step is the architecture generation. This approach is experimented
using various image and video algorithms showing its feasibility
Coarse-grained reconfigurable array architectures
Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code
A Survey of Techniques For Improving Energy Efficiency in Embedded Computing Systems
Recent technological advances have greatly improved the performance and
features of embedded systems. With the number of just mobile devices now
reaching nearly equal to the population of earth, embedded systems have truly
become ubiquitous. These trends, however, have also made the task of managing
their power consumption extremely challenging. In recent years, several
techniques have been proposed to address this issue. In this paper, we survey
the techniques for managing power consumption of embedded systems. We discuss
the need of power management and provide a classification of the techniques on
several important parameters to highlight their similarities and differences.
This paper is intended to help the researchers and application-developers in
gaining insights into the working of power management techniques and designing
even more efficient high-performance embedded systems of tomorrow
A full field, 3-D velocimeter for microgravity crystallization experiments
The programming and algorithms needed for implementing a full-field, 3-D velocimeter for laminar flow systems and the appropriate hardware to fully implement this ultimate system are discussed. It appears that imaging using a synched pair of video cameras and digitizer boards with synched rails for camera motion will provide a viable solution to the laminar tracking problem. The algorithms given here are simple, which should speed processing. On a heavily loaded VAXstation 3100 the particle identification can take 15 to 30 seconds, with the tracking taking less than one second. It seeems reasonable to assume that four image pairs can thus be acquired and analyzed in under one minute
ACOTES project: Advanced compiler technologies for embedded streaming
Streaming applications are built of data-driven, computational components, consuming and producing unbounded data streams. Streaming oriented systems have become dominant in a wide range of domains, including embedded applications and DSPs. However, programming efficiently for streaming architectures is a challenging task, having to carefully partition the computation and map it to processes in a way that best matches the underlying streaming architecture, taking into account the distributed resources (memory, processing, real-time requirements) and communication overheads (processing and delay). These challenges have led to a number of suggested solutions, whose goal is to improve the programmer’s productivity in developing applications that process massive streams of data on programmable, parallel embedded architectures. StreamIt is one such example. Another more recent approach is that developed by the ACOTES project (Advanced Compiler Technologies for Embedded Streaming). The ACOTES approach for streaming applications consists of compiler-assisted mapping of streaming tasks to highly parallel systems in order to maximize cost-effectiveness, both in terms of energy and in terms of design effort. The analysis and transformation techniques automate large parts of the partitioning and mapping process, based on the properties of the application domain, on the quantitative information about the target systems, and on programmer directives. This paper presents the outcomes of the ACOTES project, a 3-year collaborative work of industrial (NXP, ST, IBM, Silicon Hive, NOKIA) and academic (UPC, INRIA, MINES ParisTech) partners, and advocates the use of Advanced Compiler Technologies that we developed to support Embedded Streaming.Peer ReviewedPostprint (published version
A 64mW DNN-based Visual Navigation Engine for Autonomous Nano-Drones
Fully-autonomous miniaturized robots (e.g., drones), with artificial
intelligence (AI) based visual navigation capabilities are extremely
challenging drivers of Internet-of-Things edge intelligence capabilities.
Visual navigation based on AI approaches, such as deep neural networks (DNNs)
are becoming pervasive for standard-size drones, but are considered out of
reach for nanodrones with size of a few cm. In this work, we
present the first (to the best of our knowledge) demonstration of a navigation
engine for autonomous nano-drones capable of closed-loop end-to-end DNN-based
visual navigation. To achieve this goal we developed a complete methodology for
parallel execution of complex DNNs directly on-bard of resource-constrained
milliwatt-scale nodes. Our system is based on GAP8, a novel parallel
ultra-low-power computing platform, and a 27 g commercial, open-source
CrazyFlie 2.0 nano-quadrotor. As part of our general methodology we discuss the
software mapping techniques that enable the state-of-the-art deep convolutional
neural network presented in [1] to be fully executed on-board within a strict 6
fps real-time constraint with no compromise in terms of flight results, while
all processing is done with only 64 mW on average. Our navigation engine is
flexible and can be used to span a wide performance range: at its peak
performance corner it achieves 18 fps while still consuming on average just
3.5% of the power envelope of the deployed nano-aircraft.Comment: 15 pages, 13 figures, 5 tables, 2 listings, accepted for publication
in the IEEE Internet of Things Journal (IEEE IOTJ
Exploring Processor and Memory Architectures for Multimedia
Multimedia has become one of the cornerstones of our 21st century society and, when combined with mobility, has enabled a tremendous evolution of our society. However, joining these two concepts introduces many technical challenges. These range from having sufficient performance for handling multimedia content to having the battery stamina for acceptable mobile usage. When taking a projection of where we are heading, we see these issues becoming ever more challenging by increased mobility as well as advancements in multimedia content, such as introduction of stereoscopic 3D and augmented reality. The increased performance needs for handling multimedia come not only from an ongoing step-up in resolution going from QVGA (320x240) to Full HD (1920x1080) a 27x increase in less than half a decade. On top of this, there is also codec evolution (MPEG-2 to H.264 AVC) that adds to the computational load increase. To meet these performance challenges there has been processing and memory architecture advances (SIMD, out-of-order superscalarity, multicore processing and heterogeneous multilevel memories) in the mobile domain, in conjunction with ever increasing operating frequencies (200MHz to 2GHz) and on-chip memory sizes (128KB to 2-3MB). At the same time there is an increase in requirements for mobility, placing higher demands on battery-powered systems despite the steady increase in battery capacity (500 to 2000mAh). This leaves negative net result in-terms of battery capacity versus performance advances. In order to make optimal use of these architectural advances and to meet the power limitations in mobile systems, there is a need for taking an overall approach on how to best utilize these systems. The right trade-off between performance and power is crucial. On top of these constraints, the flexibility aspects of the system need to be addressed. All this makes it very important to reach the right architectural balance in the system. The first goal for this thesis is to examine multimedia applications and propose a flexible solution that can meet the architectural requirements in a mobile system. Secondly, propose an automated methodology of optimally mapping multimedia data and instructions to a heterogeneous multilevel memory subsystem. The proposed methodology uses constraint programming for solving a multidimensional optimization problem. Results from this work indicate that using today’s most advanced mobile processor technology together with a multi-level heterogeneous on-chip memory subsystem can meet the performance requirements for handling multimedia. By utilizing the automated optimal memory mapping method presented in this thesis lower total power consumption can be achieved, whilst performance for multimedia applications is improved, by employing enhanced memory management. This is achieved through reduced external accesses and better reuse of memory objects. This automatic method shows high accuracy, up to 90%, for predicting multimedia memory accesses for a given architecture
Digital signal processor fundamentals and system design
Digital Signal Processors (DSPs) have been used in accelerator systems for more than fifteen years and have largely contributed to the evolution towards digital technology of many accelerator systems, such as machine protection, diagnostics and control of beams, power supply and motors. This paper aims at familiarising the reader with DSP fundamentals, namely DSP characteristics and processing development. Several DSP examples are given, in particular on Texas Instruments DSPs, as they are used in the DSP laboratory companion of the lectures this paper is based upon. The typical system design flow is described; common difficulties, problems and choices faced by DSP developers are outlined; and hints are given on the best solution
- …