Technical design of the phase I Mu3e experiment

The Mu3e experiment aims to find or exclude the lepton flavour violating decay at branching fractions above . A first phase of the experiment using an existing beamline at the Paul Scherrer Institute (PSI) is designed to reach a single event sensitivity of . We present an overview of all aspects of the technical design and expected performance of the phase I Mu3e detector. The high rate of up to muon decays per second and the low momenta of the decay electrons and positrons pose a unique set of challenges, which we tackle using an ultra thin tracking detector based on high-voltage monolithic active pixel sensors combined with scintillating fibres and tiles for precise timing measurements

Technical design of the phase I Mu3e experiment

The Mu3e experiment aims to find or exclude the lepton flavour violating decay $\mu \rightarrow eee$ at branching fractions above $10^{-16}$. A first phase of the experiment using an existing beamline at the Paul Scherrer Institute (PSI) is designed to reach a single event sensitivity of $2\cdot 10^{-15}$. We present an overview of all aspects of the technical design and expected performance of the phase~I Mu3e detector. The high rate of up to $10^{8}$ muon decays per second and the low momenta of the decay electrons and positrons pose a unique set of challenges, which we tackle using an ultra thin tracking detector based on high-voltage monolithic active pixel sensors combined with scintillating fibres and tiles for precise timing measurements.Comment: 114 pages, 185 figures. Submitted to Nuclear Instruments and Methods A. Edited by Frank Meier Aeschbacher This version has many enhancements for better readability and more detail

HE-LHC: The High-Energy Large Hadron Collider – Future Circular Collider Conceptual Design Report Volume 4

In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider (FCC-hh), a highest-luminosity high-energy lepton collider (FCC-ee), the corresponding 100 km tunnel infrastructure, as well as the physics opportunities of these two colliders, and a high-energy LHC, based on FCC-hh technology. This document constitutes the third volume of the FCC Conceptual Design Report, devoted to the hadron collider FCC-hh. It summarizes the FCC-hh physics discovery opportunities, presents the FCC-hh accelerator design, performance reach, and staged operation plan, discusses the underlying technologies, the civil engineering and technical infrastructure, and also sketches a possible implementation. Combining ingredients from the Large Hadron Collider (LHC), the high-luminosity LHC upgrade and adding novel technologies and approaches, the FCC-hh design aims at significantly extending the energy frontier to 100 TeV. Its unprecedented centre-of-mass collision energy will make the FCC-hh a unique instrument to explore physics beyond the Standard Model, offering great direct sensitivity to new physics and discoveries

Design of a wireless monitoring system based on the ZigBee protocol for photovoltaic systems

This thesis was submitted for the degree of Master of Philosophy and awarded by Brunel University.This work deals with the possibility of using the promising technology of wireless sensor networks (WSN) in the field of photovoltaic (PV) plant supervising and monitoring. The knowledge of the status and good working condition of each PV module separately as well as of any component of the PV system will guide in a more efficient way of power management. This work will concentrate on monitoring and controlling as well as healthy operation control of PV panels separately. Data logging will be also available and can be used for reference or statistical purposes. The nature of wireless sensor networks (WSN) offers several advantages on monitoring and controlling applications over other traditional technologies including self-healing, self-organization, and flexibility. The versatility, ease of use, and reliability of a mesh network topology offered by the ZigBee technology that is based on the IEEE 802.15.4 standard, are used in this work to offer the maximum of its capabilities on the system being presented. A set of sensors attached on each PV panel are connected to a wireless ZigBee module. Each PV panel has its own ZigBee device located at its back side. All ZigBee devices forms a network with all the necessary devices of the ZigBee protocol included, such as end devises (RFD), a router (FFD), and a coordinator (COO). An extra ZigBee device might optionally be used to serve the whole system as an Ethernet gateway for making the system able to be connected to the internet. The factors that are being monitored are the panel‟s temperature, the output voltage, and output current. At the router device that operates as a parent for all the end devices, extra monitored factors are the air dust concentration, current irradiance and also the angle of the PV array (in the case of tracking system use).Two controlling outputs (relays) are located at the router device offering the capability of controlling the motors or the actuators of a tracking system