Modeling and Optimal Operation of Hydraulic, Wind and Photovoltaic Power Generation Systems

The transition to 100% renewable energy in the future is one of the most important ways of achieving "carbon peaking and carbon neutrality" and of reducing the adverse effects of climate change. In this process, the safe, stable and economical operation of renewable energy generation systems, represented by hydro-, wind and solar power, is particularly important, and has naturally become a key concern for researchers and engineers. Therefore, this book focuses on the fundamental and applied research on the modeling, control, monitoring and diagnosis of renewable energy generation systems, especially hydropower energy systems, and aims to provide some theoretical reference for researchers, power generation departments or government agencies

Tidal turbine modelling from the perspective of design and operation

The aim of this thesis is to study the effects of turbulent flow on a fixed pitch tidal current turbine from the perspective of turbine design and operation. A prototype turbine, Deltastream as it is known, is being developed by Tidal Energy Ltd for deployment in Ramsey Sound, Wales. It is well known that turbulence plays an important role in the fatigue life of marine turbines. Field measurements of tidal flow at the turbine site were analysed to establish the velocity spectra and turbulence intensity. This revealed a wide range of anisotropic turbulence which is dependent upon the tidal direction with intensities ranging from 5-20%. A numerical turbine model based on momentum theory was constructed in a time marching formulation that accounts for the effects of dynamic inflow and rotationally augmented airfoil stall delay properties. The turbine rotor design allows for load alleviation by regulation of the turbine tip speed ratio. At flow velocities above the rated velocity the tip speed ratio can be increased to reduce turbine loads. The model has been combined with a novel rotor speed control algorithm that estimates unsteady turbine inflow velocity from turbine loading without the requirement for external sensing of flow speed. When the turbine is subjected to three dimensional turbulent inflow the rotor speed controller has been shown to significantly reduce the fatigue effect of unsteady, turbulent flow. The turbine blade design has been developed using the model established. Experimental validation studies were carried out at 1/16th scale in turbulent conditions. Studies using the model have; identified the relationship between turbulence intensity and turbine fatigue load, established a controller schedule to significantly reduce fatigue loading and determined the blading fatigue life in realistic turbulent flows

Combining Sensors and Multibody Models for Applications in Vehicles, Machines, Robots and Humans

The combination of physical sensors and computational models to provide additional information about system states, inputs and/or parameters, in what is known as virtual sensing, is becoming increasingly popular in many sectors, such as the automotive, aeronautics, aerospatial, railway, machinery, robotics and human biomechanics sectors. While, in many cases, control-oriented models, which are generally simple, are the best choice, multibody models, which can be much more detailed, may be better suited to some applications, such as during the design stage of a new product

Proceedings of the ECCOMAS Thematic Conference on Multibody Dynamics 2015

This volume contains the full papers accepted for presentation at the ECCOMAS Thematic Conference on Multibody Dynamics 2015 held in the Barcelona School of Industrial Engineering, Universitat Politècnica de Catalunya, on June 29 - July 2, 2015. The ECCOMAS Thematic Conference on Multibody Dynamics is an international meeting held once every two years in a European country. Continuing the very successful series of past conferences that have been organized in Lisbon (2003), Madrid (2005), Milan (2007), Warsaw (2009), Brussels (2011) and Zagreb (2013); this edition will once again serve as a meeting point for the international researchers, scientists and experts from academia, research laboratories and industry working in the area of multibody dynamics. Applications are related to many fields of contemporary engineering, such as vehicle and railway systems, aeronautical and space vehicles, robotic manipulators, mechatronic and autonomous systems, smart structures, biomechanical systems and nanotechnologies. The topics of the conference include, but are not restricted to: ● Formulations and Numerical Methods ● Efficient Methods and Real-Time Applications ● Flexible Multibody Dynamics ● Contact Dynamics and Constraints ● Multiphysics and Coupled Problems ● Control and Optimization ● Software Development and Computer Technology ● Aerospace and Maritime Applications ● Biomechanics ● Railroad Vehicle Dynamics ● Road Vehicle Dynamics ● Robotics ● Benchmark ProblemsPostprint (published version

Aircraft Modeling and Simulation

Various aerodynamics, structural dynamics, and control design and experimental studies are presented with the aim of advancing green and morphing aircraft research. The results obtained with an in-house CFD code are compared and validated with those of two NASA codes. The aerodynamical model of the UAS-S45 morphing wing as well as the structural model of a morphing winglet are presented. A new design methodology for oleo-pneumatic landing gear drop impact dynamics is presented as well as its experimental validation. The design of a nonlinear dynamic inversion (NDI)-based disturbance rejection control on a tailless aircraft is presented, including its validation using wind tunnel tests

Multibody dynamics 2015

This volume contains the full papers accepted for presentation at the ECCOMAS Thematic Conference on Multibody Dynamics 2015 held in the Barcelona School of Industrial Engineering, Universitat Politècnica de Catalunya, on June 29 - July 2, 2015. The ECCOMAS Thematic Conference on Multibody Dynamics is an international meeting held once every two years in a European country. Continuing the very successful series of past conferences that have been organized in Lisbon (2003), Madrid (2005), Milan (2007), Warsaw (2009), Brussels (2011) and Zagreb (2013); this edition will once again serve as a meeting point for the international researchers, scientists and experts from academia, research laboratories and industry working in the area of multibody dynamics. Applications are related to many fields of contemporary engineering, such as vehicle and railway systems, aeronautical and space vehicles, robotic manipulators, mechatronic and autonomous systems, smart structures, biomechanical systems and nanotechnologies. The topics of the conference include, but are not restricted to: Formulations and Numerical Methods, Efficient Methods and Real-Time Applications, Flexible Multibody Dynamics, Contact Dynamics and Constraints, Multiphysics and Coupled Problems, Control and Optimization, Software Development and Computer Technology, Aerospace and Maritime Applications, Biomechanics, Railroad Vehicle Dynamics, Road Vehicle Dynamics, Robotics, Benchmark Problems. The conference is organized by the Department of Mechanical Engineering of the Universitat Politècnica de Catalunya (UPC) in Barcelona. The organizers would like to thank the authors for submitting their contributions, the keynote lecturers for accepting the invitation and for the quality of their talks, the awards and scientific committees for their support to the organization of the conference, and finally the topic organizers for reviewing all extended abstracts and selecting the awards nominees.Postprint (published version

Proceeding Of Mechanical Engineering Research Day 2016 (MERD’16)

This Open Access e-Proceeding contains a compilation of 105 selected papers from the Mechanical Engineering Research Day 2016 (MERD’16) event, which is held in Kampus Teknologi, Universiti Teknikal Malaysia Melaka (UTeM) - Melaka, Malaysia, on 31 March 2016. The theme chosen for this event is ‘IDEA. INSPIRE. INNOVATE’. It was gratifying to all of us when the response for MERD’16 is overwhelming as the technical committees received more than 200 submissions from various areas of mechanical engineering. After a peer-review process, the editors have accepted 105 papers for the e-proceeding that cover 7 main themes. This open access e-Proceeding can be viewed or downloaded at www3.utem.edu.my/care/proceedings. We hope that these proceeding will serve as a valuable reference for researchers. With the large number of submissions from the researchers in other faculties, the event has achieved its main objective which is to bring together educators, researchers and practitioners to share their findings and perhaps sustaining the research culture in the university. The topics of MERD’16 are based on a combination of fundamental researches, advanced research methodologies and application technologies. As the editor-in-chief, we would like to express our gratitude to the editorial board and fellow review members for their tireless effort in compiling and reviewing the selected papers for this proceeding. We would also like to extend our great appreciation to the members of the Publication Committee and Secretariat for their excellent cooperation in preparing the proceeding of MERD’16