Passively mode-locked laser using an entirely centred erbium-doped fiber

This paper describes the setup and experimental results for an entirely centred erbium-doped fiber laser with passively mode-locked output. The gain medium of the ring laser cavity configuration comprises a 3 m length of two-core optical fiber, wherein an undoped outer core region of 9.38 μm diameter surrounds a 4.00 μm diameter central core region doped with erbium ions at 400 ppm concentration. The generated stable soliton mode-locking output has a central wavelength of 1533 nm and pulses that yield an average output power of 0.33 mW with a pulse energy of 31.8 pJ. The pulse duration is 0.7 ps and the measured output repetition rate of 10.37 MHz corresponds to a 96.4 ns pulse spacing in the pulse train

Automatic analysis and classification of cardiac acoustic signals for long term monitoring

Objective: Cardiovascular diseases are the leading cause of death worldwide resulting in over 17.9 million deaths each year. Most of these diseases are preventable and treatable, but their progression and outcomes are significantly more positive with early-stage diagnosis and proper disease management. Among the approaches available to assist with the task of early-stage diagnosis and management of cardiac conditions, automatic analysis of auscultatory recordings is one of the most promising ones, since it could be particularly suitable for ambulatory/wearable monitoring. Thus, proper investigation of abnormalities present in cardiac acoustic signals can provide vital clinical information to assist long term monitoring. Cardiac acoustic signals, however, are very susceptible to noise and artifacts, and their characteristics vary largely with the recording conditions which makes the analysis challenging. Additionally, there are challenges in the steps used for automatic analysis and classification of cardiac acoustic signals. Broadly, these steps are the segmentation, feature extraction and subsequent classification of recorded signals using selected features. This thesis presents approaches using novel features with the aim to assist the automatic early-stage detection of cardiovascular diseases with improved performance, using cardiac acoustic signals collected in real-world conditions. Methods: Cardiac auscultatory recordings were studied to identify potential features to help in the classification of recordings from subjects with and without cardiac diseases. The diseases considered in this study for the identification of the symptoms and characteristics are the valvular heart diseases due to stenosis and regurgitation, atrial fibrillation, and splitting of fundamental heart sounds leading to additional lub/dub sounds in the systole or diastole interval of a cardiac cycle. The localisation of cardiac sounds of interest was performed using an adaptive wavelet-based filtering in combination with the Shannon energy envelope and prior information of fundamental heart sounds. This is a prerequisite step for the feature extraction and subsequent classification of recordings, leading to a more precise diagnosis. Localised segments of S1 and S2 sounds, and artifacts, were used to extract a set of perceptual and statistical features using wavelet transform, homomorphic filtering, Hilbert transform and mel-scale filtering, which were then fed to train an ensemble classifier to interpret S1 and S2 sounds. Once sound peaks of interest were identified, features extracted from these peaks, together with the features used for the identification of S1 and S2 sounds, were used to develop an algorithm to classify recorded signals. Overall, 99 features were extracted and statistically analysed using neighborhood component analysis (NCA) to identify the features which showed the greatest ability in classifying recordings. Selected features were then fed to train an ensemble classifier to classify abnormal recordings, and hyperparameters were optimized to evaluate the performance of the trained classifier. Thus, a machine learning-based approach for the automatic identification and classification of S1 and S2, and normal and abnormal recordings, in real-world noisy recordings using a novel feature set is presented. The validity of the proposed algorithm was tested using acoustic signals recorded in real-world, non-controlled environments at four auscultation sites (aortic valve, tricuspid valve, mitral valve, and pulmonary valve), from the subjects with and without cardiac diseases; together with recordings from the three large public databases. The performance metrics of the methodology in relation to classification accuracy (CA), sensitivity (SE), precision (P+), and F1 score, were evaluated. Results: This thesis proposes four different algorithms to automatically classify fundamental heart sounds – S1 and S2; normal fundamental sounds and abnormal additional lub/dub sounds recordings; normal and abnormal recordings; and recordings with heart valve disorders, namely the mitral stenosis (MS), mitral regurgitation (MR), mitral valve prolapse (MVP), aortic stenosis (AS) and murmurs, using cardiac acoustic signals. The results obtained from these algorithms were as follows: • The algorithm to classify S1 and S2 sounds achieved an average SE of 91.59% and 89.78%, and F1 score of 90.65% and 89.42%, in classifying S1 and S2, respectively. 87 features were extracted and statistically studied to identify the top 14 features which showed the best capabilities in classifying S1 and S2, and artifacts. The analysis showed that the most relevant features were those extracted using Maximum Overlap Discrete Wavelet Transform (MODWT) and Hilbert transform. • The algorithm to classify normal fundamental heart sounds and abnormal additional lub/dub sounds in the systole or diastole intervals of a cardiac cycle, achieved an average SE of 89.15%, P+ of 89.71%, F1 of 89.41%, and CA of 95.11% using the test dataset from the PASCAL database. The top 10 features that achieved the highest weights in classifying these recordings were also identified. • Normal and abnormal classification of recordings using the proposed algorithm achieved a mean CA of 94.172%, and SE of 92.38%, in classifying recordings from the different databases. Among the top 10 acoustic features identified, the deterministic energy of the sound peaks of interest and the instantaneous frequency extracted using the Hilbert Huang-transform, achieved the highest weights. • The machine learning-based approach proposed to classify recordings of heart valve disorders (AS, MS, MR, and MVP) achieved an average CA of 98.26% and SE of 95.83%. 99 acoustic features were extracted and their abilities to differentiate these abnormalities were examined using weights obtained from the neighborhood component analysis (NCA). The top 10 features which showed the greatest abilities in classifying these abnormalities using recordings from the different databases were also identified. The achieved results demonstrate the ability of the algorithms to automatically identify and classify cardiac sounds. This work provides the basis for measurements of many useful clinical attributes of cardiac acoustic signals and can potentially help in monitoring the overall cardiac health for longer duration. The work presented in this thesis is the first-of-its-kind to validate the results using both, normal and pathological cardiac acoustic signals, recorded for a long continuous duration of 5 minutes at four different auscultation sites in non-controlled real-world conditions.Open Acces

A Framework for Medical Images Classification Using Soft Set

AbstractMedical images classification is a significant research area that receives growing attention from both the research community and medicine industry. It addresses the problem of diagnosis, analysis and teaching purposes in medicine. For these several medical imaging modalities and applications based on data mining techniques have been proposed and developed. Thus, the primary objective of medical images classification is not only to achieve good accuracy but to understand which parts of anatomy are affected by the disease to help clinicians in early diagnosis of the pathology and in learning the progression of a disease. This furnishes motivation from the advancement in data mining techniques and particularly in soft set, to propose a classification algorithm based on the notions of soft set theory. As a result, a new framework for medical imaging classification consisting of six phases namely: data acquisition, data pre-processing, data partition, soft set classifier, data analysis and performance evolution is presented. It is expected that soft set classifier will provide better results in terms of sensitivity, specificity, running time and overall classifier accuracy

Assessment of Heart Disease using Fuzzy Classification Techniques

In this paper we discuss the classification results of cardiac patients of ischemical cardiopathy, valvular heart disease, and arterial hypertension, based on 19 characteristics (descriptors) including ECHO data, effort testings, and age and weight. In this order we have used different fuzzy clustering algorithms, namely hierarchical fuzzy clustering, hierarchical and horizontal fuzzy characteristics clustering, and a new clustering technique, fuzzy hierarchical cross-classification. The characteristics clustering techniques produce fuzzy partitions of the characteristics involved and, thus, are useful tools for studying the similarities between different characteristics and for essential characteristics selection. The cross-classification algorithm produces not only a fuzzy partition of the cardiac patients analyzed, but also a fuzzy partition of their considered characteristics. In this way it is possible to identify which characteristics are responsible for the similarities or dissimilarities observed between different groups of patients

Image-Based Cardiac Diagnosis With Machine Learning: A Review

Cardiac imaging plays an important role in the diagnosis of cardiovascular disease (CVD). Until now, its role has been limited to visual and quantitative assessment of cardiac structure and function. However, with the advent of big data and machine learning, new opportunities are emerging to build artificial intelligence tools that will directly assist the clinician in the diagnosis of CVDs. This paper presents a thorough review of recent works in this field and provide the reader with a detailed presentation of the machine learning methods that can be further exploited to enable more automated, precise and early diagnosis of most CVDs

Fuzzy Filtering: A Mathematical Theory and Applications in Life Science

Non

Novel Hypertrophic Cardiomyopathy Diagnosis Index Using Deep Features and Local Directional Pattern Techniques

Hypertrophic cardiomyopathy (HCM) is a genetic disorder that exhibits a wide spectrum of clinical presentations, including sudden death. Early diagnosis and intervention may avert the latter. Left ventricular hypertrophy on heart imaging is an important diagnostic criterion for HCM, and the most common imaging modality is heart ultrasound (US). The US is operator-dependent, and its interpretation is subject to human error and variability. We proposed an automated computer-aided diagnostic tool to discriminate HCM from healthy subjects on US images. We used a local directional pattern and the ResNet-50 pretrained network to classify heart US images acquired from 62 known HCM patients and 101 healthy subjects. Deep features were ranked using Student's t-test, and the most significant feature (SigFea) was identified. An integrated index derived from the simulation was defined as 100.log(10 )(SigFea /root 2) in each subject, and a diagnostic threshold value was empirically calculated as the mean of the minimum and maximum integrated indices among HCM and healthy subjects, respectively. An integrated index above a threshold of 0.5 separated HCM from healthy subjects with 100% accuracy in our test dataset

Detection and diagnosis of dilated cardiomyopathy and hypertrophic cardiomyopathy using image processing techniques

AbstractMajor heart diseases like heart muscle damage and valvular problems are diagnosed using echocardiogram. Since the echocardiogram is an image or sequence of images with less information the cardiologist spends more time to predict or to make decision. Automating the detection and diagnosis of dilated cardiomyopathy (DCM) and hypertrophic cardiomyopathy (HCM) is a key enabling technology in computer aided diagnosis systems. In this paper, a system is proposed to automatically detect and diagnose dilated cardiomyopathy (DCM) and hypertrophic cardiomyopathy (HCM). This system performs denoising, enhancement, before left ventricular segmentation is carried out in the individual frames. Using the segmented left ventricle, the LV parameters like volume and ejection fraction (EF) are calculated and also the end-diastolic LV is extracted. The PCA and DCT features are obtained from the extracted end-diastolic LV and the classifiers BPNN, SVM and combined K-NN are used to classify the normal hearts, hearts affected with DCM and hearts affected with HCM. The PCA feature with BPNN classifier gives a highest overall accuracy of 92.04% in classifying normal and abnormal hearts. Experiments over 60 echocardiogram videos expose that the proposed system can be effectively utilized to detect and diagnose DCM and HCM