Automated Debugging Methodology for FPGA-based Systems

Electronic devices make up a vital part of our lives. These are seen from mobiles, laptops, computers, home automation, etc. to name a few. The modern designs constitute billions of transistors. However, with this evolution, ensuring that the devices fulfill the designer’s expectation under variable conditions has also become a great challenge. This requires a lot of design time and effort. Whenever an error is encountered, the process is re-started. Hence, it is desired to minimize the number of spins required to achieve an error-free product, as each spin results in loss of time and effort. Software-based simulation systems present the main technique to ensure the verification of the design before fabrication. However, few design errors (bugs) are likely to escape the simulation process. Such bugs subsequently appear during the post-silicon phase. Finding such bugs is time-consuming due to inherent invisibility of the hardware. Instead of software simulation of the design in the pre-silicon phase, post-silicon techniques permit the designers to verify the functionality through the physical implementations of the design. The main benefit of the methodology is that the implemented design in the post-silicon phase runs many order-of-magnitude faster than its counterpart in pre-silicon. This allows the designers to validate their design more exhaustively. This thesis presents five main contributions to enable a fast and automated debugging solution for reconfigurable hardware. During the research work, we used an obstacle avoidance system for robotic vehicles as a use case to illustrate how to apply the proposed debugging solution in practical environments. The first contribution presents a debugging system capable of providing a lossless trace of debugging data which permits a cycle-accurate replay. This methodology ensures capturing permanent as well as intermittent errors in the implemented design. The contribution also describes a solution to enhance hardware observability. It is proposed to utilize processor-configurable concentration networks, employ debug data compression to transmit the data more efficiently, and partially reconfiguring the debugging system at run-time to save the time required for design re-compilation as well as preserve the timing closure. The second contribution presents a solution for communication-centric designs. Furthermore, solutions for designs with multi-clock domains are also discussed. The third contribution presents a priority-based signal selection methodology to identify the signals which can be more helpful during the debugging process. A connectivity generation tool is also presented which can map the identified signals to the debugging system. The fourth contribution presents an automated error detection solution which can help in capturing the permanent as well as intermittent errors without continuous monitoring of debugging data. The proposed solution works for designs even in the absence of golden reference. The fifth contribution proposes to use artificial intelligence for post-silicon debugging. We presented a novel idea of using a recurrent neural network for debugging when a golden reference is present for training the network. Furthermore, the idea was also extended to designs where golden reference is not present

Automatic Software Repair: a Bibliography

This article presents a survey on automatic software repair. Automatic software repair consists of automatically finding a solution to software bugs without human intervention. This article considers all kinds of repairs. First, it discusses behavioral repair where test suites, contracts, models, and crashing inputs are taken as oracle. Second, it discusses state repair, also known as runtime repair or runtime recovery, with techniques such as checkpoint and restart, reconfiguration, and invariant restoration. The uniqueness of this article is that it spans the research communities that contribute to this body of knowledge: software engineering, dependability, operating systems, programming languages, and security. It provides a novel and structured overview of the diversity of bug oracles and repair operators used in the literature

Machine Learning Techniques for Performance Prediction and Diagnosis of VLSI Designs

As the cost of scaling-down the manufacturing process of integrated circuits grows larger and its performance gains become smaller, designs must grow in complexity in order to achieve expected performance improvements. As this complexity grows, the development of automation tools for design, validation, and debug is critical. The number of machine learning-based techniques aiming to improve available tools has grown rapidly in recent years, as machine learning has proven an extraordinary capability of extracting knowledge from data and handling complicated non-linear behaviors, which makes it the best approach to mimic a human manual process among mathematical or algorithmic options. The work presented in this dissertation aims to evaluate the application of machine learning techniques in two different areas of the integrated circuit design process: pre-routing timing prediction and performance debugging of microprocessor cores. The strategy proposed for pre-route timing prediction is based on machine learning models that predict the post-routing timing using only placed, but un-routed circuit databases. This strategy prevents over-design due to pessimistic timing estimations, as well as it saves time by reducing the need of multiple design iterations caused by the use of inaccurate timing estimations to guide circuit optimizations such as gate resizing, logic restructuring, or threshold voltage assignment leading to design violations once routing is executed. The obtained results show that our models achieve a prediction quality on-par with a sign-off static timing analysis commercial tool, with a 3× speedup. For the performance debug of microprocessor cores task, we focus on bugs that affect the generation-by-generation performance improvement in new designs. This task is very challenging due to the lack of an accurate golden performance model, unlike its functional counterpart. In addition, there is a limited visibility of the performance on intermediate steps of the design, and overall, the debugging infrastructure is lacking, which makes this problem even more challenging. Currently this process is executed on a highly manual manner, which requires large amounts of time to fully characterize a bug. Therefore, automated techniques for performance debugging are essential to keep-up the performance gains obtained by new microarchitectural designs. In this dissertation, we focus on detecting the presence of a performance bug and localizing the microarchitectural unit on which the bug might be, more detailed debugging is left for future work. Our proposed techniques achieved up to a 91.5% of bug detection, and up to a 98% top-3 (out of 16 possible) bug localization accuracy on bugs with average IPC impact > 1%

A study on Machine Learning-based Hardware Bug Localization

Simulation-based verification is a very essential technique in ensuring the correct functionality of any digital integrated circuit design before it goes on silicon. One of the major challenges of running simulation-based verification on complex designs is the tradeoff between simulation time and the time taken for failure localization or to root cause. This is because the simulation run times could be very high when there are many checkers used per cycle of execution. However, when lesser checkers are turned on, the amount of time for manual debug increases because, after failure, the verification engineer has to manually analyze the failure and turn on the more granular checkers individually and re-simulate; or invest lots of time, memory and resources to manually go through the simulation cycles dumps before the failure which is not good given the current complexity of designs. Machine learning has emerged to be a popular technique to construct mathematical models that can understand the expected patterns from a given dataset. To address the aforementioned trade-off problem, an idea is investigated to use the failing signatures from fewer active high-level checkers during simulation to train a machine learning model to predict the location of the bug in the design. This information would in turn be used to turn on relevant checkers in the design before re-simulation. Other methods to analyze the signals in design after failure to predict bug location were also studied. This idea is implemented and tested on a MIPS processor with total of ~ 700 bugs injected in 15 different units to distinguish them with good accuracy

Reining in the Functional Verification of Complex Processor Designs with Automation, Prioritization, and Approximation

Our quest for faster and efficient computing devices has led us to processor designs with enormous complexity. As a result, functional verification, which is the process of ascertaining the correctness of a processor design, takes up a lion's share of the time and cost spent on making processors. Unfortunately, functional verification is only a best-effort process that cannot completely guarantee the correctness of a design, often resulting in defective products that may have devastating consequences.Functional verification, as practiced today, is unable to cope with the complexity of current and future processor designs. In this dissertation, we identify extensive automation as the essential step towards scalable functional verification of complex processor designs. Moreover, recognizing that a complete guarantee of design correctness is impossible, we argue for systematic prioritization and prudent approximation to realize fast and far-reaching functional verification solutions. We partition the functional verification effort into three major activities: planning and test generation, test execution and bug detection, and bug diagnosis. Employing a perspective we refer to as the automation, prioritization, and approximation (APA) approach, we develop solutions that tackle challenges across these three major activities. In pursuit of efficient planning and test generation for modern systems-on-chips, we develop an automated process for identifying high-priority design aspects for verification. In addition, we enable the creation of compact test programs, which, in our experiments, were up to 11 times smaller than what would otherwise be available at the beginning of the verification effort. To tackle challenges in test execution and bug detection, we develop a group of solutions that enable the deployment of automatic and robust mechanisms for catching design flaws during high-speed functional verification. By trading accuracy for speed, these solutions allow us to unleash functional verification platforms that are over three orders of magnitude faster than traditional platforms, unearthing design flaws that are otherwise impossible to reach. Finally, we address challenges in bug diagnosis through a solution that fully automates the process of pinpointing flawed design components after detecting an error. Our solution, which identifies flawed design units with over 70% accuracy, eliminates weeks of diagnosis effort for every detected error.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/137057/1/birukw_1.pd

Robust and reliable hardware accelerator design through high-level synthesis

System-on-chip design is becoming increasingly complex as technology scaling enables more and more functionality on a chip. This scaling-driven complexity has resulted in a variety of reliability and validation challenges including logic bugs, hot spots, wear-out, and soft errors. To make matters worse, as we reach the limits of Dennard scaling, efforts to improve system performance and energy efficiency have resulted in the integration of a wide variety of complex hardware accelerators in SoCs. Thus the challenge is to design complex, custom hardware that is efficient, but also correct and reliable. High-level synthesis shows promise to address the problem of complex hardware design by providing a bridge from the high-productivity software domain to the hardware design process. Much research has been done on high-level synthesis efficiency optimizations. This dissertation shows that high-level synthesis also has the power to address validation and reliability challenges through three automated solutions targeting three key stages in the hardware design and use cycle: pre-silicon debugging, post-silicon validation, and post-deployment error detection. Our solution for rapid pre-silicon debugging of accelerator designs is hybrid tracing: comparing a datapath-level trace of hardware execution with a reference software implementation at a fine temporal and spatial granularity to detect logic bugs. An integrated backtrace process delivers source-code meaning to the hardware designer, pinpointing the location of bug activation and providing a strong hint for potential bug fixes. Experimental results show that we are able to detect and aid in localization of logic bugs from both C/C++ specifications as well as the high-level synthesis engine itself. A variation of this solution tailored for rapid post-silicon validation of accelerator designs is hybrid hashing: inserting signature generation logic in a hardware design to create a heavily compressed signature stream that captures the internal behavior of the design at a fine temporal and spatial granularity for comparison with a reference set of signatures generated by high-level simulation to detect bugs. Using hybrid hashing, we demonstrate an improvement in error detection latency (time elapsed from when a bug is activated to when it manifests as an observable failure) of two orders of magnitude and a threefold improvement in bug coverage compared to traditional post-silicon validation techniques. Hybrid hashing also uncovered previously unknown bugs in the CHStone benchmark suite, which is widely used by the HLS community. Hybrid hashing incurs less than 10% area overhead for the accelerator it validates with negligible performance impact, and we also introduce techniques to minimize any possible intrusiveness introduced by hybrid hashing. Finally, our solution for post-deployment error detection is modulo-3 shadow datapaths: performing lightweight shadow computations in modulo-3 space for each main computation. We leverage the binding and scheduling flexibility of high-level synthesis to detect control errors through diverse binding and minimize area cost through intelligent checkpoint scheduling and modulo-3 reducer sharing. We introduce logic and dataflow optimizations to further reduce cost. We evaluated our technique with 12 high-level synthesis benchmarks from the arithmetic-oriented PolyBench benchmark suite using FPGA emulated netlist-level error injection. We observe coverages of 99.1% for stuck-at faults, 99.5% for soft errors, and 99.6% for timing errors with a 25.7% area cost and negligible performance impact. Leveraging a mean error detection latency of 12.75 cycles (4150× faster than end result check) for soft errors, we also explore a rollback recovery method with an additional area cost of 28.0%, observing a 175× increase in reliability against soft errors. While the area cost of our modulo shadow datapaths is much better than traditional modular redundancy approaches, we want to maximize the applicability of our approach. To this end, we take a dive into gate-level architectural design for modulo arithmetic functional units. We introduce new low-cost gate-level architectures for all four key functional units in a shadow datapath: (1) a modulo reduction algorithm that generates architectures consisting entirely of full-adder standard cells; (2) minimum-area modulo adder and subtractor architectures; (3) an array-based modulo multiplier design; and (4) a modulo equality comparator that handles the residue encoding produced by the above. We compare our new functional units to the previous state-of-the-art approach, observing a 12.5% reduction in area and a 47.1% reduction in delay for a 32-bit mod-3 reducer; that our reducer costs, which tend to dominate shadow datapath costs, do not increase with larger modulo bases; and that for modulo-15 and above, all of our modulo functional units have better area and delay then their previous counterparts. We also demonstrate the practicality of our approach by designing a custom shadow datapath for error detection of a multiply accumulate functional unit, which has an area overhead of only 12% for a 32-bit main datapath and 2-bit modulo-3 shadow datapath. Taking our reliability solution further, we look at the bigger picture of modulo shadow datapaths combined with other solutions at different abstraction layers, looking to answer the following question: Given all of the existing reliability improvement techniques for application-specific hardware accelerators, what techniques or combinations of techniques are the most cost-effective? To answer this question, we consider a soft error fault model and empirically evaluate cross-layer combinations of ABFT, EDDI, and modulo shadow datapaths in the context of high-level synthesis; parity in logic synthesis; and flip-flop hardening techniques at the physical design level. We measure the reliability benefit and area, energy, and performance cost of each technique individually and for interesting technique combinations through FPGA emulated fault-injection and physical place-and-route. Our results show that a combination of parity and flip-flop hardening is the most cost-effective in general with an average 1.3% area cost and 5.7% energy cost for a 50× improvement in reliability. The addition of modulo-3 shadow datapaths to this combination provides some additional benefit for some applications, even without considering its combinational logic, stuck-at fault, and timing error protection benefits. We also observe new efficiency challenges for ABFT and EDDI when used for hardware accelerators