Distributed photovoltaic systems: Utility interface issues and their present status

Major technical issues involving the integration of distributed photovoltaics (PV) into electric utility systems are defined and their impacts are described quantitatively. An extensive literature search, interviews, and analysis yielded information about the work in progress and highlighted problem areas in which additional work and research are needed. The findings from the literature search were used to determine whether satisfactory solutions to the problems exist or whether satisfactory approaches to a solution are underway. It was discovered that very few standards, specifications, or guidelines currently exist that will aid industry in integrating PV into the utility system. Specific areas of concern identified are: (1) protection, (2) stability, (3) system unbalance, (4) voltage regulation and reactive power requirements, (5) harmonics, (6) utility operations, (7) safety, (8) metering, and (9) distribution system planning and design

New trends for conducting hazard & operability (HAZOP) studies in continuous chemical processes

Identifying hazards is fundamental for ensuring the safe design and operation of a system in process plants and other facilities. Several techniques are available to identify hazardous situations, all of which require their rigorous, thorough, and systematic application by a multi-disciplinary team of experts. Success rests upon first identifying and subsequently analyzing possible scenarios that can cause accidents with different degrees of severity. While hazard identification may be the most important stage for risk management, it depends on subjectivity issues (e.g., human observation, good judgment and intuition, creativity, expertise, knowledge) which introduce bias. Without a structured identification system, hazards can be overlooked, thus entailing incomplete risk-evaluations and potential loss. The present Thesis is focused on developing both managerial and technical aspects intended to standardize one of the most used techniques for hazard identification; viz. HAZard & Operability (HAZOP) study. These criteria have been carefully implemented not only to ensure that most of the hazardous scenarios will be identified, but also that US OSHA PSM Rule, EPA RMP, and Seveso Directive requirements will be accomplished. Chapter I pioneers the main research topic; from introducing the process safety concept up to the evidence of more detailed information is required from related regulations. A review of regulations (i.e., US, Europe legislation) focused on Hazard Identification has been conducted, highlighting, there is an absence of specific criteria for performing techniques intended to identify what can go wrong. Chapter II introduces the risk management system required to analyze the risk from chemical process facilities, and justifies that hazard identification stage is the Process Safety foundation. Hereafter, an overview of the key Process Hazard Analyzes (PHA) has been conducted, and the specific HAZOP weaknesses and strengths have been highlighted to establish the first steps to focus on. Chapter III establishes the scope, the purpose and the specific objectives that the research covers. It answers the following questions on the spot: why the present research is performed, which elements are included, and what has been considered for acquiring the final conclusions of the manuscript. Chapter IV gathers HAZOP-related literature from books, guidelines, standards, major journals, and conference proceedings with the purpose of classifying the research conducted over the years and finally define the HAZOP state-of-the-art. Additionally, and according to the information collected, the current HAZOP limitations have been emphasized, and thus, the research needs that should be considered for the HAZOP improvement and advance. Chapter V analyzes the data collected while preparing, organizing, executing and writing HAZOPs in five petroleum-refining processes. A statistical analysis has been performed to extract guidance and conclusions to support the established criteria to conduct effectively HAZOP studies. Chapter VI establishes the whole set of actions that have to be taken into account for ensuring a wellplanned and executed HAZOP study. Both technical and management issues are addressed, criteria supported after considering the previous chapters of the manuscript. Chapter VI itself is the result of the present research, and could be used as a guideline not only for team leaders, but also for any related party interested on performing HAZOPs in continuous chemical processes. Chapter VII states the final conclusions of the research. The interested parties should be released about the hazard identification related-gaps present in current process safety regulations; which are the key limitations of the HAZOP study, and finally, which are the criteria to cover the research needs that have been found Annex I proposes the key tools (tables, figures and checklists "ready-to use'') to be used for conducting HAZOPs in continuous chemical processes. The information layout is structured according to the proposed HAZOP Management System. This information is intended to provide concise and structured documentation to be used as a reference book when conducting HAZOPs. Annex II is intended to overview the most relevant petroleum refining processes by highlighting key factors to take into account in the point of view of process safety and hazard identification, i.e. HAZOP. In this sense, key health and safety information of specific petroleum refining units is provided as a valuable guidance during brainstorming sessions. Annex III illustrates the complete set of data collected during the field work of the present research, and also analyzed in Chapter V of the manuscript. Additionally, it depicts a statistical summary of the key variables treated during the analysis. Finally, the Nomenclature, References, and Abbreviations & Acronyms used and cited during the manuscript have been listed. Additionally, a Glossary of key terms related to the Process Safety field has been illustrated.La present Tesis doctoral té com a objectiu estandarditzar l'aplicació d'una de les tècniques més utilitzades a la industria de procés per a la identificació de perills; l'anomenat HAZard & OPerability (HAZOP) study, específicament a processos complexes, com per exemple, unitat de refineria del petroli.El capítol I defineix el concepte de Seguretat de Processos, i progressivament analitza les diferents regulacions relacionades amb la temàtica, detallant específicament les mancances i buits d'informació que actualment hi ha presents a la primera etapa de la gestió del risc en industries de procés: la identificació de perills.El capítol II defineix el sistema de gestió del risc tecnològic que aplica a les industries de procés, i es justifica que l'etapa d'identificació de perills és el pilar de tot el sistema. Finalment, es mencionen algunes de les tècniques d'identificació més utilitzades, els anomenats Process Hazard Analysis (PHA), i es detallen les seves mancances i fortaleses, característiques que han acabat definint la temàtica específica de la Tesis. Concretament, es dóna èmfasis a la tècnica anomenada HAZard & OPerability (HAZOP) study, objecte principal de la recerca.El capítol III defineix l'abast, el propòsit i els objectius específics de la recerca. La intenció d'aquest capítol és donar resposta a les següents qüestions: el perquè de la recerca, quins elements han estat inclosos i què s'ha considerat per tal d'assolir les conclusions de la Tesis.El capítol IV descriu l'estat de l'art de la literatura relacionada amb el HAZOP. Aquesta revisió no només permet classificar les diferents línies de recerca relacionades amb el HAZOP, sinó que també permet assolir un coneixement profund de les diferents particularitats de la pròpia tècnica. El capítol finalitza amb un conjunt de mancances tant de gestió com tècniques, així com les necessitats de recerca que poden millorar l'organització i execució dels HAZOPs.El capítol V analitza la informació que ha estat recopilada durant la fase experimental de la tesis. Les dades procedeixen de la participació en cinc estudis HAZOP aplicats a la industria de refineria del petroli.En aquest sentit, el capítol V desenvolupa una anàlisi estadística d'aquestes dades per extreure'n conclusions quant a la preparació, organització i execució dels HAZOPs.El capítol VI estableix el conjunt d'accions que s'ha de tenir en compte per tal d'assegurar que un estudi HAZOP estigui ben organitzat i executat (la metodologia). Es defineix un Sistema de Gestió del HAZOP, i a partir de les seves fases, es desenvolupa una metodologia que pretén donar suport a tots aquells punts febles que han estat identificats en els capítols anteriors. Aquesta metodologia té la intenció de donar suport i guia no només als líders del HAZOP, sinó també a qualsevol part interessada en aquesta temàtica.El capítol VII descriu les conclusions de la recerca. En primera instància s'enumeren les mancances quant a la definició de criteris a seguir de diferents regulacions que apliquen a la Seguretat de Processos.Seguidament, es mencionen les limitacions de la pròpia tècnica HAZOP, i finalment, es descriuen quins són els criteris establerts per donar solució a totes aquestes febleses que han estat identificades.L'Annex I és una recopilació de diferents criteris que han estat desenvolupats al llarg de l'escrit en forma de taules i figures. Aquestes han estat ordenades cronològicament d'acord amb les diferents fases que defineixen el Sistema de Gestió HAZOP. L'annex I es pot utilitzar com a una referència concisa i pràctica, preparada i pensada per ésser utilitzada directament a camp, amb la intenció de donar suport a les parts interessades en liderar estudis HAZOP.L'annex II recopila informació relacionada amb aspectes clau de seguretat i medi ambient en diferents unitats de refineria. Aquest informació és un suport per tal de motivar el "brainstorming" dels diferents membres que conformen l'equip HAZOP.L'Annex III recopila les dades de les diferents variables que han estat considerades a la fase experimental de la recerca, juntament amb un conjunt de figures que mostren la seva estadística bàsica

Control Architecture Modeling for Future Power Systems

Uncontrollable power generation, distributed energy resources, controllable demand, etc. are fundamental aspects of energy systems largely based on renewable energy supply. These technologies have in common that they contradict the conventional categories of electric power system operation. As their introduction has proceeded incrementally in the past, operation strategies of the power system could be adapted. For example much more wind power could be integrated than originally anticipated, largely due to the flexibility reserves already present in the power system, and the possibility of interregional electricity exchange. However, at the same time, it seems that the overall system design cannot keep up by simply adapting in response to changes, but that also new strategies have to be designed in anticipation. Changes to the electricity markets have been suggested to adapt to the limited predictability of wind power, and several new control strategies have been proposed, in particular to enable the control of distributed energy resources, including for example, distributed generation or electric vehicles. Market designs addressing the procurement of balancing resources are highly dependent on the operation strategies specifying the resource requirements. How should one decide which control strategy and market configuration is best for a future power system? Most research up to this point has addressed single isolated aspects of this design problem. Those of the ideas that fit with current markets and operation concepts are lucky; they can be evaluated on the present design. But how could they be evaluated on a potential future power system? Approaches are required that support the design and evaluation of power system operation and control in context of future energy scenarios. This work addresses this challenge, not by providing a universal solution, but by providing basic modeling methodology that enables better problem formulation and by suggesting an approach to addressing the general chicken/egg problem of planning and re-design of system operation and control. The dissertation first focuses on the development of models, diagrams, that support the conceptual design of control and operation strategies, where a central theme is the focus on modeling system goals and functions rather than system structure. The perspective is then shifted toward long-term energy scenarios and adaptation of power system operation, considering the integration of energy scenario models with the re-design of operation strategies. The main contributions in the first part are, firstly, by adaptation of an existing functional modeling approach called Multilevel Flow Modeling (MFM) to the power systems domain, identifying the means-ends composition of control levels and development of principles for the consistent modeling of control structures, a formalization of control-as-a-service; secondly, the formal mapping of fluctuating and controllable resources to a multi-scale and multi-stage representation of control and operation structures; and finally the application to some concrete study cases, including a present system balancing, and proposed control structures such as Microgrids and Cells. In the second part, the main contributions are the outline of a formation strategy, integrating the design and model-based evaluation of future power system operation concepts with iterative energy scenario development. Finally, a new modeling framework for development and evaluation of power system operation in context of energy-storage based power system balancing is introduced.<br/

NASA space station automation: AI-based technology review

Research and Development projects in automation for the Space Station are discussed. Artificial Intelligence (AI) based automation technologies are planned to enhance crew safety through reduced need for EVA, increase crew productivity through the reduction of routine operations, increase space station autonomy, and augment space station capability through the use of teleoperation and robotics. AI technology will also be developed for the servicing of satellites at the Space Station, system monitoring and diagnosis, space manufacturing, and the assembly of large space structures

MODELING SYSTEM BEHAVIORAL OF INDIVIDUAL PROCEDURES AT THE TACTICAL LEVEL OF THE MARINE CORPS HUMAN RESOURCE DEVELOPMENT PROCESS—DO HRDP POLICY, PROCEDURES, AND IMS SUPPORT OR HINDER THEMSELVES?

In February 2021, the Marine Corps released its official guidance on the Human Resource Development Process (HRDP). The Marine Corps outlined the HRDP phases of Guidance, Planning, Production, Assignment, and Assessment as co-occurring and continuous operations. Each process within the phases produces vast amounts of qualitative and quantitative data for the Marine Corps. Using Monterey Phoenix to model both the HRDP and Information Management System (IMS) system behaviors supporting the HRDP, I evaluated the Marine Corps' IMS ability to support Talent Management 2030. First, processes designed in the industrial era and carried into the digital age should not persist. This study recommends IT IMS changes to deal with the legacy processes and methodologies from a bygone era. Secondly, this report provides a framework, tools, and examples to conduct process analysis across all administrative functions across the force, allowing Marine Corps leadership to capitalize on efficiencies already gained by Fleet Marine Forces.Captain, United States Marine CorpsApproved for public release. Distribution is unlimited

Distributed photovoltaic systems: Utility interface issues and their present status. Intermediate/three-phase systems

The interface issues between the intermediate-size Power Conditioning Subsystem (PCS) and the utility are considered. A literature review yielded facts about the status of identified issues

Automation, Protection and Control of Substation Based on IEC 61850

Reliability of power system protection system has been a key issue in the substation operation due to the use of multi-vendor equipment of proprietary features, environmental issues, and complex fault diagnosis. Failure to address these issues could have a significant effect on the performance of the entire electricity grid. With the introduction of IEC 61850 standard, substation automation system (SAS) has significantly altered the scenario in utilities and industries as indicated in this thesis