12,117 research outputs found
Solar Photovoltaic and Thermal Energy Systems: Current Technology and Future Trends
Solar systems have become very competitive solutions for residential, commercial, and industrial applications for both standalone and grid connected operations. This paper presents an overview of the current status and future perspectives of solar energy (mainly photovoltaic) technology and the required conversion systems. The focus in the paper is put on the current technology, installations challenges, and future expectations. Various aspects related to the global solar market, the photovoltaic (PV) modules cost and technology, and the power electronics converter systems are addressed. Research trends and recommendations for each of the PV system sectors are also discussed.Junta de AndalucÃa P11-TIC-7070Ministerio de Ciencia e Innovación TEC2016-78430-
Modeling a Grid-Connected PV/Battery Microgrid System with MPPT Controller
This paper focuses on performance analyzing and dynamic modeling of the
current grid-tied fixed array 6.84kW solar photovoltaic system located at
Florida Atlantic University (FAU). A battery energy storage system is designed
and applied to improve the systems stability and reliability. An overview of
the entire system and its PV module are presented. In sequel, the corresponding
I-V and P-V curves are obtained using MATLAB-Simulink package. Actual data was
collected and utilized for the modeling and simulation of the system. In
addition, a grid- connected PV/Battery system with Maximum Power Point Tracking
(MPPT) controller is modeled to analyze the system performance that has been
evaluated under two different test conditions: (1) PV power production is
higher than the load demand (2) PV generated power is less than required load.
A battery system has also been sized to provide smoothing services to this
array. The simulation results show the effective of the proposed method. This
system can be implemented in developing countries with similar weather
conditions to Florida.Comment: 6 pages, 14 figures, PVSC 201
Power quality and electromagnetic compatibility: special report, session 2
The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems.
Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages).
The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks:
Block 1: Electric and Magnetic Fields, EMC, Earthing systems
Block 2: Harmonics
Block 3: Voltage Variation
Block 4: Power Quality Monitoring
Two Round Tables will be organised:
- Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13)
- Reliability Benchmarking - why we should do it? What should be done in future? (RT 15
On the Evaluation of Plug-in Electric Vehicle Data of a Campus Charging Network
The mass adoption of plug-in electric vehicles (PEVs) requires the deployment
of public charging stations. Such facilities are expected to employ distributed
generation and storage units to reduce the stress on the grid and boost
sustainable transportation. While prior work has made considerable progress in
deriving insights for understanding the adverse impacts of PEV chargings and
how to alleviate them, a critical issue that affects the accuracy is the lack
of real world PEV data. As the dynamics and pertinent design of such charging
stations heavily depend on actual customer demand profile, in this paper we
present and evaluate the data obtained from a node charging network
equipped with Level chargers at a major North American University campus.
The data is recorded for weeks starting from late . The result
indicates that the majority of the customers use charging lots to extend their
driving ranges. Also, the demand profile shows that there is a tremendous
opportunity to employ solar generation to fuel the vehicles as there is a
correlation between the peak customer demand and solar irradiation. Also, we
provided a more detailed data analysis and show how to use this information in
designing future sustainable charging facilities.Comment: Accepted by IEEE Energycon 201
Power Quality Improvement and Low Voltage Ride through Capability in Hybrid Wind-PV Farms Grid-Connected Using Dynamic Voltage Restorer
© 2018 IEEE. Translations and content mining are permitted for academic research only. Personal use is also permitted, but republication/redistribution requires IEEE permission.This paper proposes the application of a dynamic voltage restorer (DVR) to enhance the power quality and improve the low voltage ride through (LVRT) capability of a three-phase medium-voltage network connected to a hybrid distribution generation system. In this system, the photovoltaic (PV) plant and the wind turbine generator (WTG) are connected to the same point of common coupling (PCC) with a sensitive load. The WTG consists of a DFIG generator connected to the network via a step-up transformer. The PV system is connected to the PCC via a two-stage energy conversion (dc-dc converter and dc-ac inverter). This topology allows, first, the extraction of maximum power based on the incremental inductance technique. Second, it allows the connection of the PV system to the public grid through a step-up transformer. In addition, the DVR based on fuzzy logic controller is connected to the same PCC. Different fault condition scenarios are tested for improving the efficiency and the quality of the power supply and compliance with the requirements of the LVRT grid code. The results of the LVRT capability, voltage stability, active power, reactive power, injected current, and dc link voltage, speed of turbine, and power factor at the PCC are presented with and without the contribution of the DVR system.Peer reviewe
Recommended from our members
A review of microgrid development in the United States – A decade of progress on policies, demonstrations, controls, and software tools
Microgrids have become increasingly popular in the United States. Supported by favorable federal and local policies, microgrid projects can provide greater energy stability and resilience within a project site or community. This paper reviews major federal, state, and utility-level policies driving microgrid development in the United States. Representative U.S. demonstration projects are selected and their technical characteristics and non-technical features are introduced. The paper discusses trends in the technology development of microgrid systems as well as microgrid control methods and interactions within the electricity market. Software tools for microgrid design, planning, and performance analysis are illustrated with each tool's core capability. Finally, the paper summarizes the successes and lessons learned during the recent expansion of the U.S. microgrid industry that may serve as a reference for other countries developing their own microgrid industries
Experimental tests to recover the photovoltaic power by battery system
The uncertainty and variability of the Renewable Energy Sources (RES) power plants within the power grid is an open issue. The
present study focuses on the use of batteries to overcome the limitations associated with the photovoltaic inverter operation,
trying to maximize the global energy produced. A set of switches, was placed between a few photovoltaic modules and a
commercial inverter, capable to change configuration of the plant dynamically. Such system stores the power that the inverter is
not able to let into the grid inside batteries. At the base of this optimization, there is the achievement of two main configurations
in which the batteries and the photovoltaic modules are electrically connected in an appropriate manner as a function of inverter
efficiency and thus solar radiation. A control board and the relative program, to change the configuration, was designed and
implemented, based on the value of the measured radiation, current, batteries voltage, and calculated inverter efficiency. Finally
from the cost and impact analysis we can say that, today the technology of lithium batteries, for this application, is still too
expensive in comparison with lead-acid batteries
- …