A comparison of processing techniques for producing prototype injection moulding inserts.

This project involves the investigation of processing techniques for producing low-cost moulding inserts used in the particulate injection moulding (PIM) process. Prototype moulds were made from both additive and subtractive processes as well as a combination of the two. The general motivation for this was to reduce the entry cost of users when considering PIM. PIM cavity inserts were first made by conventional machining from a polymer block using the pocket NC desktop mill. PIM cavity inserts were also made by fused filament deposition modelling using the Tiertime UP plus 3D printer. The injection moulding trials manifested in surface finish and part removal defects. The feedstock was a titanium metal blend which is brittle in comparison to commodity polymers. That in combination with the mesoscale features, small cross-sections and complex geometries were considered the main problems. For both processing methods, fixes were identified and made to test the theory. These consisted of a blended approach that saw a combination of both the additive and subtractive processes being used. The parts produced from the three processing methods are investigated and their respective merits and issues are discussed

Reducing risk in pre-production investigations through undergraduate engineering projects.

This poster is the culmination of final year Bachelor of Engineering Technology (B.Eng.Tech) student projects in 2017 and 2018. The B.Eng.Tech is a level seven qualification that aligns with the Sydney accord for a three-year engineering degree and hence is internationally benchmarked. The enabling mechanism of these projects is the industry connectivity that creates real-world projects and highlights the benefits of the investigation of process at the technologist level. The methodologies we use are basic and transparent, with enough depth of technical knowledge to ensure the industry partners gain from the collaboration process. The process we use minimizes the disconnect between the student and the industry supervisor while maintaining the academic freedom of the student and the commercial sensitivities of the supervisor. The general motivation for this approach is the reduction of the entry cost of the industry to enable consideration of new technologies and thereby reducing risk to core business and shareholder profits. The poster presents several images and interpretive dialogue to explain the positive and negative aspects of the student process

ARCHITECTURE FOR A CBM+ AND PHM CENTRIC DIGITAL TWIN FOR WARFARE SYSTEMS

The Department of the Navy’s continued progression from time-based maintenance into condition-based maintenance plus (CBM+) shows the importance of increasing operational availability (Ao) across fleet weapon systems. This capstone uses the concept of digital efficiency from a digital twin (DT) combined with a three-dimensional (3D) direct metal laser melting printer as the physical host on board a surface vessel. The DT provides an agnostic conduit for combining model-based systems engineering with a digital analysis for real-time prognostic health monitoring while improving predictive maintenance. With the DT at the forefront of prioritized research and development, the 3D printer combines the value of additive manufacturing with complex systems in dynamic shipboard environments. To demonstrate that the DT possesses parallel abilities for improving both the physical host’s Ao and end-goal mission, this capstone develops a DT architecture and a high-level model. The model focuses on specific printer components (deionized [DI] water level, DI water conductivity, air filters, and laser motor drive system) to demonstrate the DT’s inherent effectiveness towards CBM+. To embody the system of systems analysis for printer suitability and performance, more components should be evaluated and combined with the ship’s environment data. Additionally, this capstone recommends the use of DTs as a nexus into more complex weapon systems while using a deeper level of design of experiment.Outstanding ThesisCivilian, Department of the NavyCommander, United States NavyCivilian, Department of the NavyCivilian, Department of the NavyCivilian, Department of the NavyCivilian, Department of the NavyCivilian, Department of the NavyCivilian, Department of the NavyApproved for public release. Distribution is unlimited

A Roadmap for Acquisition of Legacy Parts Through an On-demand Solution Aimed at the Energy Sector on the Norwegian Continental Shelf - A Case Implementation

\section{Abstract} Equinor has initiated a Field Life Extension (FLX) project to prolong the end-life operational capabilities of their installations by innovative methods, including Stafjord A. One of these innovative methods is to implement an on-demand solution for re-supplying the installation with spare parts manufactured through alternative methods, such as additive manufacturing (AM) and rapid casting. However, due to the age of specific components, the documentation for design, material specification, and manufacturing may be missing, i.e., legacy parts. The main aim of this thesis is to map the path from notification of a potential failure of a legacy part to the installation of a near-identical part. The life extension implies that mechanical equipment, such as valve bodies for the fire deluge systems must maintain their integrity throughout the expanded life cycle. Unfortunately, this component has exceeded its life expectancy by twice. Hence, increased degradation and risk for potential accidents introduce the need for acquiring new valve bodies. A literature review investigated the challenges and requirements for implementing the on-demand solution for legacy parts. Standards and manufacturing methods have been studied and compared. An Analytical Hierarchy Process was used to analyze the input from experts within AM and rapid casting. Finally, a case review processed the valve body through the Reverse Engineering Process (REP) activities. A roadmap is proposed based on regulations governing the manufacturing of mechanical components used on the Norwegian Continental Shelf (NCS). Furthermore, requirements for implementing the on-demand solution for legacy parts are described, including a proposition for an explicit criticality assessment for metal AM. A recommendation for operational part-monitoring and identification linked with a digital warehouse of the corresponding part is made to finalize the proposed roadmap for acquiring legacy parts on the NCS. The Analytical hierarchy process (AHP) reveals that rapid casting outperforms metal AM for valve body manufacturing. In addition, metal AM and rapid casting are benchmarked regarding realistic cost and lead time procurement limitations. The results include the AHP output and indicate that the cost of ordering the valve body favour rapid casting, but the lead time for metal AM is lower than rapid casting. The total cost for metal AM per part is nearly equal to the cost of the initial requested batch of 26 valve bodies produced by rapid casting

A comparison of processing techniques for producing prototype injection moulding inserts.

This project involves the investigation of processing techniques for producing low cost moulding inserts used in the particulate injection moulding (PIM) process. Prototype moulds were made from both additive and subtractive processes as well as a combination of the two. The general motivation for this was to reduce the entry cost of users when considering PIM. PIM cavity inserts were first made by conventional machining from a polymer block using the pocket NC desktop mill. PIM cavity inserts were also made by fused filament deposition modelling using the Tiertime UP plus 3D printer. The injection moulding trials manifested in surface finish and part removal defects. The feedstock was a titanium metal blend which is brittle in comparison to commodity polymers. That in combination with the meso-scale features, small cross sections and complex geometries were considered the main problems. For both processing methods fixes were identified and made to test the theory. These consisted of a blended approach that saw a combination of both the additive and subtractive processes being used. The parts produced from the three processing methods are investigated and their respective merits and issues are discussed

3D Recording and Interpretation for Maritime Archaeology

This open access peer-reviewed volume was inspired by the UNESCO UNITWIN Network for Underwater Archaeology International Workshop held at Flinders University, Adelaide, Australia in November 2016. Content is based on, but not limited to, the work presented at the workshop which was dedicated to 3D recording and interpretation for maritime archaeology. The volume consists of contributions from leading international experts as well as up-and-coming early career researchers from around the globe. The content of the book includes recording and analysis of maritime archaeology through emerging technologies, including both practical and theoretical contributions. Topics include photogrammetric recording, laser scanning, marine geophysical 3D survey techniques, virtual reality, 3D modelling and reconstruction, data integration and Geographic Information Systems. The principal incentive for this publication is the ongoing rapid shift in the methodologies of maritime archaeology within recent years and a marked increase in the use of 3D and digital approaches. This convergence of digital technologies such as underwater photography and photogrammetry, 3D sonar, 3D virtual reality, and 3D printing has highlighted a pressing need for these new methodologies to be considered together, both in terms of defining the state-of-the-art and for consideration of future directions. As a scholarly publication, the audience for the book includes students and researchers, as well as professionals working in various aspects of archaeology, heritage management, education, museums, and public policy. It will be of special interest to those working in the field of coastal cultural resource management and underwater archaeology but will also be of broader interest to anyone interested in archaeology and to those in other disciplines who are now engaging with 3D recording and visualization

NASA Tech Briefs, July 2001

Topics include: special coverage sections on Data Acquisition, and sections on electronic components and systems, software, mechanics, machinery/automation, biomedical and a special section of Photonics Tech Briefs

Active thermography for the investigation of corrosion in steel surfaces

The present work aims at developing an experimental methodology for the analysis of corrosion phenomena of steel surfaces by means of Active Thermography (AT), in reflexion configuration (RC). The peculiarity of this AT approach consists in exciting by means of a laser source the sound surface of the specimens and acquiring the thermal signal on the same surface, instead of the corroded one: the thermal signal is then composed by the reflection of the thermal wave reflected by the corroded surface. This procedure aims at investigating internal corroded surfaces like in vessels, piping, carters etc. Thermal tests were performed in Step Heating and Lock-In conditions, by varying excitation parameters (power, time, number of pulse, ….) to improve the experimental set up. Surface thermal profiles were acquired by an IR thermocamera and means of salt spray testing; at set time intervals the specimens were investigated by means of AT. Each duration corresponded to a surface damage entity and to a variation in the thermal response. Thermal responses of corroded specimens were related to the corresponding corrosion level, referring to a reference specimen without corrosion. The entity of corrosion was also verified by a metallographic optical microscope to measure the thickness variation of the specimens

Streamlining Digital Modeling and Building Information Modelling (BIM) Uses for the Oil and Gas Projects

The oil and gas industry is a technology-driven industry. Over the last two decades, it has heavily made use of digital modeling and associated technologies (DMAT) to enhance its commercial capability. Meanwhile, the Building Information Modelling (BIM) has grown at an exponential rate in the built environment sector. It is not only a digital representation of physical and functional characteristics of a facility, but it has also made an impact on the management processes of building project lifecycle. It is apparent that there are many similarities between BIM and DMAT usability in the aspect of physical modeling and functionality. The aim of this study is to streamline the usage of both DMAT and BIM whilst discovering valuable practices for performance improvement in the oil and gas projects. To achieve this, 28 BIM guidelines, 83 DMAT academic publications and 101 DMAT vendor case studies were selected for review. The findings uncover (a) 38 BIM uses; (b) 32 DMAT uses and; (c) 36 both DMAT and BIM uses. The synergy between DMAT and BIM uses would render insightful references into managing efficient oil and gas’s projects. It also helps project stakeholders to recognise future investment or potential development areas of BIM and DMAT uses in their projects