164 research outputs found
Optimal placement of FACTS controllers for maximising system loadability by PSO
In this paper, a multi objective-based method has been suggested to
enhance the power system loadability with optimal placement of flexible AC
transmission system (FACTS) controllers using particle swarm optimisation
(PSO) technique. The objective function is to maximise the system loadability
subjected to maintaining the system security, integrity, and stability margins
within limits by obtaining the optimal location, installation costs, and control
settings of the FACTS controllers. The various FACTS controllers, i.e., static
var compensator (SVC), thyristor controlled series compensator (TCSC), and
unified power flow controller (UPFC), have been considered in this study. The
effectiveness of the proposed methodology has been investigated on the
standard IEEE 14-bus, 30-bus, and practical Java-Bali 24-bus Indonesian
system and the results are compared with the method suggested in the
literatures. Moreover, the results obtained by PSO have also been compared
with other evolutionary approach, viz., genetic algorithm (GA)
Unified Power Flow Controller: A Brief Review on Tuning and Allocation for Power System Stability
The Power System can become unstable due to disturbances. To enhance system stability the Unified Power Flow Controller (UPFC) is tuned and allocated in the System. In this paper, a brief review of UPFC tuning and allocation studies for power systems stability is presented. The databases consulted for literature are the IEEE Xplore, ScienceDirect, Google Scholar and IOP Publications. The search terms used are Allocation, Tuning, UPFC, Power System and Stability to find the literature used in this review. A total of 26 Journal articles and conference papers were found and reviewed based on tuning and allocation studies. The Researchers applied Fuzzy coordination, Genetic Algorithm (GA), Particles Swarm Optimization (PSO), Grey Wolf Optimization (GWO) and Linear Quadratic Tracker (LQT) to tune the UPFC for enhancing power system stability. For studies on UPFC allocation in power systems, the Researchers applied frequency response of power system transfer function, power flow, Tabu Search (TS), PSO and GA. For allocation based on optimization, the Researchers minimized power losses, voltage index and investment costs considering equality and inequality constraints
Enhancing the performance of flexible AC transmission systems (FACTS) by computational intelligence
The thesis studies and analyzes UPFC technology concerns the management of active and reactive power in the power networks to improve the performance aiming to reach the best operation criteria. The contributions of the thesis start with formatting, deriving, coding and programming the network equations required to link UPFC steady-state and dynamic models to the power systems. The thesis derives GA applications on UPFC to achieve real criteria on a real world sub-transmission network.
An enhanced GA technique is proposed by enhancing and updating the working phases of the GA including the objective function formulation and computing the fitness using the diversity in the population and selection probability. The simulations and results show the advantages of using the proposed technique. Integrating the results by linking the case studies of the steady-state and the dynamic analysis is achieved. In the dynamic analysis section, a new idea for integrating the GA with ANFIS to be applied on the control action procedure is presented.
The main subject of the thesis deals with enhancing the steady-state and dynamics performance of the power grids by Flexible AC Transmission System (FACTS) based on computational intelligence. Control of the electric power system can be achieved by designing the FACTS controller, where the new trends as Artificial Intelligence can be applied to this subject to enhance the characteristics of controller performance. The proposed technique will be applied to solve real problems in a Finnish power grid. The thesis seeks to deal, solve, and enhance performances until the year 2020, where the data used is until the conditions of year 2020. The FACTS device, which will be used in the thesis, is the most promising one, which known as the Unified Power Flow Controller (UPFC).
The thesis achieves the optimization of the type, the location and the size of the power and control elements for UPFC to optimize the system performance. The thesis derives the criteria to install the UPFC in an optimal location with optimal parameters and then designs an AI based damping controller for enhancing power system dynamic performance. In this thesis, for every operating point GA is used to search for controllers' parameters, parameters found at certain operating point are different from those found at others. ANFISs are required in this case to recognize the appropriate parameters for each operating point
Optimal Control Parameters for a UPFC in a Multimachine Using PSO
The crucial factor affecting the modern power systems today is load flow control. The unified power flow controller (UPFC) is an effective means for controlling the power flow and can provide damping capability during transient conditions. The UPFC is controlled conventionally using PI controllers. The optimal design of the PI controllers for a UPFC is a challenging task and time consuming using the conventional techniques. This paper presents an approach using particle swarm optimization (PSO) for the design of optimal conventional controllers for a UPFC in a multimachine power system. Simulation results are presented to show the effectiveness of the proposed PSO based approach for the design of optimal conventional controllers for a UPFC in a multimachine power system
Nonlinear optimization approach for UPFC power flow control and voltage security: Sufficient system constraints for optimality
This dissertation provides a nonlinear optimization algorithm for the long term control of Unified Power Flow Controller (UPFC) to remove overloads and voltage violations by optimized control of power flows and voltages in the power network. It provides a control strategy for finding the long term control settings of one or more UPFCs by considering all the possible settings and all the (N-1) topologies of a power network. Also, a simple evolutionary algorithm (EA) has been proposed for the placement of more than one UPFC in large power systems --Abstract, page iv
Recommended from our members
Optimal allocation of FACTS devices in power networks using imperialist competitive algorithm (ICA)
This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonDue to the high energy consumption demand and restrictions in the installation of new transmission lines, using Flexible AC Transmission System (FACTS) devices is inevitable. In power system analysis, transferring high-quality power is essential. In fact, one of the important factors that has a special role in terms of efficiency and operation is maximum power transfer capability. FACTS devices are used for controlling the voltage, stability, power flow and security of transmission lines. However, it is necessary to find the optimal location for these devices in power networks. Many optimization techniques have been deployed to find the optimal location for FACTS devices in power networks. There are several varieties of FACTS devices with different characteristics that are used for different purposes. The imperialist competitive algorithm (ICA) is a recently developed optimization technique that is used widely in power systems. This study presents an approach to find the optimal location and size of FACTS devices in power networks using the imperialist competitive algorithm technique. This technique is based on human social evolution. ICA technique is a new heuristic algorithm for global optimization searches that is based on the concept of imperialistic competition. This algorithm is used for mathematical issues; it can be categorized on the same level as Genetic Algorithm (GA) and Particle Swarm Optimization (PSO) techniques. Also, in this study, the enhancement of voltage profile, stability and loss reduction and increasing of load-ability were investigated and carried out. In this case, to apply FACTS devices in power networks, the MATLAB program was used. Indeed, in this program all power network parameters were defined and analysed. IEEE 30-bus and IEEE 68-bus with 16 machine systems are used as a case study. All the simulation results, including voltage profile improvement and convergence characteristics, have been illustrated. The results show the advantages of the imperialist competitive algorithm technique over the conventional approaches
Application of whale algorithm optimizer for unified power flow controller optimization with consideration of renewable energy sources uncertainty
Purpose. In this paper an allocation methodology of Flexible Alternating Current Transmission Systems (FACTS) controllers, more specifically, the Unified Power Flow Controller (UPFC) is proposed. As the penetration of Renewable Energy Sources (RESs) into the conventional electric grid increases, its effect on this location must be investigated. Research studies have shown that the uncertainty of RESs in power generation influences the reactive power of a power system network and consequently its overall transmission losses. The novelty of the proposed work consists in the improvement of voltage profile and the minimization of active power loss by considering renewable energy sources intermittency in the network via optimal location of UPFC device. The allocation strategy associates the steady-state analysis of the electrical network, with the location and adjustment of controller parameters using the Whale Optimization Algorithm (WOA) technique. Methodology. In order to determine the location of UPFC, approaches are proposed based on identification of a line which is the most sensitive and effective with respect to voltage security enhancement, congestion alleviation as well as direct optimization approach. The optimum location of UPFC in the power system is discussed in this paper using line loading index, line stability index and optimization method. The objective function is solved using the WOA algorithm and its performance is evaluated by comparison with Particle Swarm Optimization (PSO) algorithm. Results. The effectiveness of the proposed allocation methodology is verified through the analysis of simulations performed on standard IEEE 30 bus test system considering different load conditions. The obtained results demonstrate that feasible and effective solutions are obtained using the proposed approach and can be used to overcome the optimum location issue. Additionally, the results show that when UPFC device is strategically positioned in the electrical network and uncertainty of RES is considered, there is a significant influence on the overall transmission loss and voltage profile enhancements of the network.Мета. У статті пропонується методологія розподілу контролерів гнучких систем передачі змінного струму (FACTS), зокрема уніфікованого контролера потоку потужності (UPFC). Оскільки проникнення відновлюваних джерел енергії (ВДЕ) у звичайну електричну мережу збільшується, необхідно досліджувати їхній вплив на це. Наукові дослідження показали, що невизначеність ВДЕ у виробленні електроенергії впливає на реактивну потужність мережі енергосистеми і, отже, на її загальні втрати під час передачі. Новизна запропонованої роботи полягає в покращенні профілю напруги та мінімізації втрат активної потужності за рахунок обліку перемежування відновлюваних джерел енергії в мережі за рахунок оптимального розташування пристрою UPFC. Стратегія розподілу пов'язує стаціонарний аналіз електричної мережі з розміщенням та налаштуванням параметрів контролера з використанням методу алгоритму оптимізації кита (WOA). Методологія. Для визначення розташування UPFC пропонуються підходи, засновані на виявленні лінії, яка є найбільш чутливою та ефективною з точки зору підвищення безпеки за напругою, зменшення навантажень, а також прямий підхід до оптимізації. Оптимальне розташування UPFC в енергосистемі обговорюється в цій статті з використанням індексу завантаження лінії, індексу стійкості лінії та методу оптимізації. Цільова функція вирішується з використанням алгоритму WOA, а її продуктивність оцінюється шляхом порівняння з алгоритмом оптимізації рою частинок (PSO). Результати. Ефективність запропонованої методології розподілу перевірена за допомогою аналізу моделювання, виконаного на тестовій системі стандартної шини IEEE 30 з урахуванням різних умов навантаження. Отримані результати демонструють, що за допомогою запропонованого підходу виходять здійсненні та ефективні рішення, які можна використовувати для подолання проблеми оптимального розташування. Крім того, результати показують, що коли пристрій UPFC стратегічно розташований в електричній мережі і враховується невизначеність ВДЕ, це значно впливає на загальні втрати при передачі і поліпшення профілю напруги в мережі
Modified rice husk and activated carbon filters for the removal of organics and heavy metals in water
Discharge of untreated industrial effluents containing heavy metals and organics is hazardous to the environment because of their toxicity and persistent nature. At the same time, agricultural waste poses disposal challenges, which can be converted into value added products like adsorbents that could serve as tools for contaminants abatement. Previous findings proved that, adsorption was a sustainable, economical and lucrative separation technique for the removal of such contaminants. This thesis presents the fabrication of a filter for the removal of organics and heavy metals in water which was prepared from treated rice husk and modified activated carbon (AC). The analysis of AC via Brunauer-Emmett-Teller (BET) surface area and scanning electron microscopy evidenced porosity of 707 m2/g as surface and a pore volume of 0.31 cm3/g. The elemental and thermogravimetric analysis proved that AC contain
48. 7% carbon, while the Fourier transform infrared spectroscopy shows that the surface contains functional groups such as O-H, C=C, C-O, C-O-C and C-H. The experimental results were fitted with fixed-bed adsorption models to understand the adsorbate-adsorbent relationship. Fixed-bed adsorption studies show that, the highest adsorption capacity of 248.2 mg/g and 234.12 mg/g for BPA and phenol respectively was obtained at 250 mg/L concentration and 9 mL/min flow rate. The results also revealed 73 % and 87 % as the highest removal capacity for heavy metal Pb and Cd respectively at 20 mg/L concentration and 9 mL/min flow rate. For sustainability, regeneration of the spent AC was carried out in a microwave which showed 75% yield after five cycles, while the rice husk was eluted with 0.lM hydrogen chloride and 37.8% efficiency was achieved after three successive cycles. The UV lamp incorporated in the filter shows total inactivation of E. coli after 7 minutes
Performance Analysis of Flexible A.C. Transmission System Devices for Stability Improvement of Power System
When large power systems are interconnected by relatively weak tie line, low-frequency oscillations are observed. Recent developments in power electronics have led to the development of the Flexible AC Transmission Systems (FACTS) devices in power systems. FACTS devices are capable of controlling the network condition in a very fast manner and this feature of FACTS can be exploited to improve the stability of a power system. To damp electromechanical oscillations in the power system, the supplementary controller can be applied with FACTS devices to increase the system damping. The supplementary controller is called damping controller. The damping controllers are designed to produce an electrical torque in phase with the speed deviation. The objective of this thesis is to develop some novel control techniques for the FACTS based damping controller design to enhance power system stability.
Proper selection of optimization techniques plays an important role in for the stability enhancement of power system. In the present thesis Genetic Algorithm (GA), Particle Swarm Optimization (PSO), and Gravitational search algorithm (GSA) along with their hybrid form have been applied and compared for a FACTS based damping controller design. Important conclusions have been drawn on the suitability of optimization technique.
The areas of research achieved in this thesis have been divided into two parts:
The aim of the first part is to develop the linearized model (Philip-Hefron model) of a single machine infinite bus power system installed with FACTS devices, such as Static Synchronous Series Compensator (SSSC) and Unified Power Flow Controller (UPFC).
Different Damping controller structures have been used and compared to mitigate the system damping by adding a component of additional damping torque proportional to speed change through the excitation system. The various soft-computing techniques have been applied in order to find the controller parameters.
The recently developed Gravitational Search Algorithm (GSA) based SSSC damping controller, and a new hybrid Genetic Algorithm and Gravitational Search Algorithm (hGA-GSA) based UPFC damping controller seems to the most effective damping controller to mitigate the system oscillation.
The aim of second part is to develop the Simulink based model (to over-come the problem associated with the linearized model) for an SMIB as well as the multi-machine power system.
Coordinated design of PSS with various FACTS devices based damping controllers are carried out considering appropriate time delays due to sensor time constant and signal transmission delays in the design process. A hybrid Particle Swarm Optimization and Gravitational Search Algorithm (hPSO-GSA) technique is employed to optimally and coordinately tune the PSS and SSSC based controller parameters and has emerged as the most superior method of coordinated controller design considered for both single machine infinite bus power system as well as a multi-machine power system.
Finally, the damping capabilities of SSSC based damping controllers are thoroughly investigated by considering a new derived modified signal known as Modified Local Input Signal which comprises both the local signal (speed deviation) and remote signal (line active power). Appropriate time delays due to sensor time constant and signal transmission delays are considered in the design process. The hybrid Particle Swarm Optimization and Gravitational Search Algorithm (hPSO-GSA) technique is used to tune the damping controller parameters. It is observed that the new modified local input signal based SSSC controller provides the best system performance compared to other alternatives considered for a single machine infinite bus power system and multi-machine power system
- …