888 research outputs found

    Spatial Multiplexing of QPSK Signals with a Single Radio: Antenna Design and Over-the-Air Experiments

    Full text link
    The paper describes the implementation and performance analysis of the first fully-operational beam-space MIMO antenna for the spatial multiplexing of two QPSK streams. The antenna is composed of a planar three-port radiator with two varactor diodes terminating the passive ports. Pattern reconfiguration is used to encode the MIMO information onto orthogonal virtual basis patterns in the far-field. A measurement campaign was conducted to compare the performance of the beam-space MIMO system with a conventional 2-by-?2 MIMO system under realistic propagation conditions. Propagation measurements were conducted for both systems and the mutual information and symbol error rates were estimated from Monte-Carlo simulations over the measured channel matrices. The results show the beam-space MIMO system and the conventional MIMO system exhibit similar finite-constellation capacity and error performance in NLOS scenarios when there is sufficient scattering in the channel. In comparison, in LOS channels, the capacity performance is observed to depend on the relative polarization of the receiving antennas.Comment: 31 pages, 23 figure

    Polarization reconfigurable antennas for space limited multiple input multiple output system

    Get PDF
    Wireless communication undergoes rapid changes in recent years. More and more people are using modern communication services, thus increasing the need for higher capacity in transmission. One of the methods that is able to meet the demands is the use of multiple antennas at both link ends known as Multiple Input Multiple Output (MIMO) system. However, for the space limited MIMO system, it is relatively difficult to accomplish good performance by using conventional antennas. Therefore, to further improve the performance offered by MIMO, Polarization Reconfigurable Antennas (PRAs) can be adopted. The diversity in polarization can be exploited to increase channel capacity. Moreover, the use of PRAs can also provide savings in terms of space and cost by arranging orthogonal polarized together instead of two physically space separation antennas. Here, single and dual port PRAs are proposed. Two techniques are deployed to achieve the PRAs are slits perturbation (switches on the radiating patch) and alteration of the feeding network (switches on the ground plane). Switching mechanism (ideal and PIN diode) is introduced to reconfigure the polarization between left-hand circular polarizations, right-hand circular polarizations, or linear polarization, operating at wireless local area network frequency band (2.4 – 2.5 GHz). Furthermore, by exploiting the odd and even mode of the coplanar waveguide structure, dual ports PRAs are realized with the ability to produce orthogonal linear polarization (LP) and circular polarization (CP) modes simultaneously. Good measured port polarization isolations (S21) of -16.3 dB and -19 dB are obtained at the frequency of 2.45 GHz for configuration A1 (orthogonal LP) and A2 (orthogonal CP), respectively. The proposed PRAs are tested in 2 x 2 MIMO indoor environments to validate their performances by using scalar power correlation method when applied as receiver in both line-of-sight (LOS) and non-line-of-sight (NLOS) scenarios. Channel capacity improvement has been achieved for spatial diversity (92.9% for LOS and 185.9% for NLOS) and polarization diversity (40.7% for LOS and 57.9% for NLOS). The proposed antenna is highly potential to be adopted to enhance the performance of the MIMO system, especially in dealing with multipath environment and space limited applications

    Performance analysis of smart optimization antenna for wireless networks

    Get PDF
    Antenna design has significantly advanced as a result of the widespread need for wireless communications and data substitution through wireless devices. The research article's goal is to provide a conceptual framework, difficulties, and opportunities for a source as well as a general overview of the antenna used in wireless communications applications. In this proposed research, we will go over a variety of topics related to mobile communication and fifth generation (5G) technologies, including its pros and benefits. A thorough comparison between the expected properties of the antennas and each generation, from 1st generation (1G) to 5G, is also included. This article also provides an overview of the investigated 5G technologies and various antenna designs

    Indoor off-body wireless MIMO communication with dual polarized textile antennas

    Get PDF
    Off-body data communication for firefighters and other rescue workers is an important area of development. The communication with a moving person in an indoor environment can be very unreliable due to channel fading. In addition, when considering off-body communication by means of textile antennas, propagation is affected by shadowing caused by the human body. By transmitting and receiving signals using multipleinput, multiple-output antennas (MIMO communication) a large improvement in reliability of the wireless link is obtained. In this contribution, the performance of wireless data communication using quadrature phase shift keyed (QPSK) modulated data in the 2.45 GHz ISM-band is evaluated in the case of firefighters walking indoor and communicating by means of a compact dualpattern dual-polarization diversity textile patch antenna system integrated into their clothing. Simultaneous transmit diversity (at the firefighter) and receive diversity (at the base station) up to fourth order are achieved by means of orthogonal space-time codes, providing a maximum total diversity order of 16. The measurements confirm that MIMO techniques drastically improve the reliability of the wireless link. Measurements are compared for three test persons of significantly different sizes. For equal transmitted power levels, the bit error rates for the 2Ă—2 and 4 Ă— 4 links are much lower than for a system without diversity, with the 4 Ă— 4 system clearly providing the best performance

    Antennas and Propagation Aspects for Emerging Wireless Communication Technologies

    Get PDF
    The increasing demand for high data rate applications and the delivery of zero-latency multimedia content drives technological evolutions towards the design and implementation of next-generation broadband wireless networks. In this context, various novel technologies have been introduced, such as millimeter wave (mmWave) transmission, massive multiple input multiple output (MIMO) systems, and non-orthogonal multiple access (NOMA) schemes in order to support the vision of fifth generation (5G) wireless cellular networks. The introduction of these technologies, however, is inextricably connected with a holistic redesign of the current transceiver structures, as well as the network architecture reconfiguration. To this end, ultra-dense network deployment along with distributed massive MIMO technologies and intermediate relay nodes have been proposed, among others, in order to ensure an improved quality of services to all mobile users. In the same framework, the design and evaluation of novel antenna configurations able to support wideband applications is of utmost importance for 5G context support. Furthermore, in order to design reliable 5G systems, the channel characterization in these frequencies and in the complex propagation environments cannot be ignored because it plays a significant role. In this Special Issue, fourteen papers are published, covering various aspects of novel antenna designs for broadband applications, propagation models at mmWave bands, the deployment of NOMA techniques, radio network planning for 5G networks, and multi-beam antenna technologies for 5G wireless communications

    Characterization and Enhancement of Antenna System Performance in Compact MIMO Terminals

    Get PDF
    Co-band multiple-antenna implementation in compact user terminals is necessary for harvesting the full potential of diversity and multiple-input multiple-output (MIMO) technology in cellular communication systems. The recent worldwide deployment of Long Term Evolution (LTE), which requires the use of MIMO technology in the downlink, adds to the urgency of achieving both practical and optimal multiple-antenna systems in user terminals. Contrary to conventional understanding, an optimal multiple-antenna implementation does not only involve the design and placement of antenna elements in the terminals, but extends beyond the antenna elements and common antenna parameters to comprise interactions with the near field user and the propagation environment. Moreover, these interactions are non-static, which implies that the multiple-antenna system must adapt to the prevailing overall communication channel in order to assure the highest performance gains. This doctoral thesis aims to address several key issues in optimal multiple-antenna system design for compact multi-band MIMO terminals, with the first half (Papers I to III) focusing on the performance characterization of such terminals in the presence of user interaction and propagation channel, under the challenging constraint that the terminals are compact. The second half of the thesis (Papers IV to VI) considers two performance enhancement approaches suitable for compact MIMO terminals in realistic usage conditions. In particular, the potential benefits of harmonizing compact multiple-antenna systems with the propagation channel and user influence are determined with respect to reconfigurability in antenna patterns and impedance matching circuits. In Paper I, the diversity performance of internal multiple antennas with multi-band coverage in a mock-up with the size of a typical mobile handset is investigated in different user interaction scenarios. For comparison, a second mock-up with only one multi-band antenna is also evaluated in the same user cases. An ideal uniform propagation environment is assumed. The performance at frequency bands below and above 1 GHz are presented and analyzed in detail. Paper II extends the study in Paper I by evaluating the single-input multiple-output (SIMO) and MIMO capacity performance of the same antenna prototypes under the same user interaction scenarios and propagation environment. In Paper III, the impacts of gain imbalance and antenna separation on the throughput performance of a dual-dipole configuration are studied at frequencies below and above 1 GHz in a repeatable dynamic multi-path environment, using a live HSPA network. Since the compactness of a user terminal has implications on the antenna separation and gain imbalance of the multiple antennas, the focus is to gain knowledge on how these two factors affect the end user experience in practice. In Paper IV, three simple dual-antenna topologies implemented in compact smart phone prototypes of identical form factors are evaluated in MIMO channel measurements in noise-limited and interference-limited urban scenarios. Each dual-antenna topology is intentionally designed to provide a distinct set of antenna patterns. The goal is to investigate the potential of antenna system design as one of the key performance differentiators in real terminal implementations. Paper V extends the work in Paper IV by introducing user interaction to the same MIMO channel measurement setup. Furthermore, the focus of this paper is on the evaluation of both the average and local channel performances and their potential enhancements. Finally, Paper VI ascertains the potential capacity gains of applying uncoupled adaptive matching to a compact dual-antenna terminal in an indoor office environment, under a realistic user scenario. The performance gains are evaluated by means of extensive MIMO channel measurements at frequency bands below and above 1 GHz

    Terminal-embedded beamforming for wireless local area networks

    Get PDF

    Holographic MIMO Communications: Theoretical Foundations, Enabling Technologies, and Future Directions

    Full text link
    Future wireless systems are envisioned to create an endogenously holography-capable, intelligent, and programmable radio propagation environment, that will offer unprecedented capabilities for high spectral and energy efficiency, low latency, and massive connectivity. A potential and promising technology for supporting the expected extreme requirements of the sixth-generation (6G) communication systems is the concept of the holographic multiple-input multiple-output (HMIMO), which will actualize holographic radios with reasonable power consumption and fabrication cost. The HMIMO is facilitated by ultra-thin, extremely large, and nearly continuous surfaces that incorporate reconfigurable and sub-wavelength-spaced antennas and/or metamaterials. Such surfaces comprising dense electromagnetic (EM) excited elements are capable of recording and manipulating impinging fields with utmost flexibility and precision, as well as with reduced cost and power consumption, thereby shaping arbitrary-intended EM waves with high energy efficiency. The powerful EM processing capability of HMIMO opens up the possibility of wireless communications of holographic imaging level, paving the way for signal processing techniques realized in the EM-domain, possibly in conjunction with their digital-domain counterparts. However, in spite of the significant potential, the studies on HMIMO communications are still at an initial stage, its fundamental limits remain to be unveiled, and a certain number of critical technical challenges need to be addressed. In this survey, we present a comprehensive overview of the latest advances in the HMIMO communications paradigm, with a special focus on their physical aspects, their theoretical foundations, as well as the enabling technologies for HMIMO systems. We also compare the HMIMO with existing multi-antenna technologies, especially the massive MIMO, present various...Comment: double column, 58 page
    • …
    corecore