Wide-Area Time-Synchronized Closed-Loop Control of Power Systems And Decentralized Active Distribution Networks

The rapidly expanding power system grid infrastructure and the need to reduce the occurrence of major blackouts and prevention or hardening of systems against cyber-attacks, have led to increased interest in the improved resilience of the electrical grid. Distributed and decentralized control have been widely applied to computer science research. However, for power system applications, the real-time application of decentralized and distributed control algorithms introduce several challenges. In this dissertation, new algorithms and methods for decentralized control, protection and energy management of Wide Area Monitoring, Protection and Control (WAMPAC) and the Active Distribution Network (ADN) are developed to improve the resiliency of the power system. To evaluate the findings of this dissertation, a laboratory-scale integrated Wide WAMPAC and ADN control platform was designed and implemented. The developed platform consists of phasor measurement units (PMU), intelligent electronic devices (IED) and programmable logic controllers (PLC). On top of the designed hardware control platform, a multi-agent cyber-physical interoperability viii framework was developed for real-time verification of the developed decentralized and distributed algorithms using local wireless and Internet-based cloud communication. A novel real-time multiagent system interoperability testbed was developed to enable utility independent private microgrids standardized interoperability framework and define behavioral models for expandability and plug-and-play operation. The state-of-theart power system multiagent framework is improved by providing specific attributes and a deliberative behavior modeling capability. The proposed multi-agent framework is validated in a laboratory based testbed involving developed intelligent electronic device prototypes and actual microgrid setups. Experimental results are demonstrated for both decentralized and distributed control approaches. A new adaptive real-time protection and remedial action scheme (RAS) method using agent-based distributed communication was developed for autonomous hybrid AC/DC microgrids to increase resiliency and continuous operability after fault conditions. Unlike the conventional consecutive time delay-based overcurrent protection schemes, the developed technique defines a selectivity mechanism considering the RAS of the microgrid after fault instant based on feeder characteristics and the location of the IEDs. The experimental results showed a significant improvement in terms of resiliency of microgrids through protection using agent-based distributed communication

A Remote Capacity Utilization Estimator for WLANs

In WLANs, the capacity of a node is not fixed and can vary dramatically due to the shared nature of the medium under the IEEE 802.11 MAC mechanism. There are two main methods of capacity estimation in WLANs: Active methods based upon probing packets that consume the bandwidth of the channel and do not scale well. Passive methods based upon analyzing the transmitted packets that avoid the overhead of transmitting probe packets and perform with greater accuracy. Furthermore, passive methods can be implemented locally or remotely. Local passive methods require an additional dissemination mechanism in order to communicate the capacity information to other network nodes which adds complexity and can be unreliable under adverse network conditions. On the other hand, remote passive methods do not require a dissemination mechanism and so can be simpler to implement and also do not suffer from communication reliability issues. Many applications (e.g. ANDSF etc) can benefit from utilizing this capacity information. Therefore, in this thesis we propose a new remote passive Capacity Utilization estimator performed by neighbour nodes. However, there will be an error associated with the measurements owing to the differences in the wireless medium as observed by the different nodes’ location. The main undertaking of this thesis is to address this issue. An error model is developed to analyse the main sources of error and to determine their impact on the accuracy of the estimator. Arising from this model, a number of modifications are implemented to improve the accuracy of the estimator. The network simulator ns2 is used to investigate the performance of the estimator and the results from a range of different test scenarios indicate its feasibility and accuracy as a passive remote method. Finally, the estimator is deployed in a node saturation detection scheme where it is shown to outperform two other similar schemes based upon queue observation and probing with ping packets

Proceedings, MSVSCC 2015

The Virginia Modeling, Analysis and Simulation Center (VMASC) of Old Dominion University hosted the 2015 Modeling, Simulation, & Visualization Student capstone Conference on April 16th. The Capstone Conference features students in Modeling and Simulation, undergraduates and graduate degree programs, and fields from many colleges and/or universities. Students present their research to an audience of fellow students, faculty, judges, and other distinguished guests. For the students, these presentations afford them the opportunity to impart their innovative research to members of the M&S community from academic, industry, and government backgrounds. Also participating in the conference are faculty and judges who have volunteered their time to impart direct support to their students’ research, facilitate the various conference tracks, serve as judges for each of the tracks, and provide overall assistance to this conference. 2015 marks the ninth year of the VMASC Capstone Conference for Modeling, Simulation and Visualization. This year our conference attracted a number of fine student written papers and presentations, resulting in a total of 51 research works that were presented. This year’s conference had record attendance thanks to the support from the various different departments at Old Dominion University, other local Universities, and the United States Military Academy, at West Point. We greatly appreciated all of the work and energy that has gone into this year’s conference, it truly was a highly collaborative effort that has resulted in a very successful symposium for the M&S community and all of those involved. Below you will find a brief summary of the best papers and best presentations with some simple statistics of the overall conference contribution. Followed by that is a table of contents that breaks down by conference track category with a copy of each included body of work. Thank you again for your time and your contribution as this conference is designed to continuously evolve and adapt to better suit the authors and M&S supporters. Dr.Yuzhong Shen Graduate Program Director, MSVE Capstone Conference Chair John ShullGraduate Student, MSVE Capstone Conference Student Chai

Voltage stability of power systems with renewable-energy inverter-based generators: A review

© 2021 by the authors. The main purpose of developing microgrids (MGs) is to facilitate the integration of renewable energy sources (RESs) into the power grid. RESs are normally connected to the grid via power electronic inverters. As various types of RESs are increasingly being connected to the electrical power grid, power systems of the near future will have more inverter-based generators (IBGs) instead of synchronous machines. Since IBGs have significant differences in their characteristics compared to synchronous generators (SGs), particularly concerning their inertia and capability to provide reactive power, their impacts on the system dynamics are different compared to SGs. In particular, system stability analysis will require new approaches. As such, research is currently being conducted on the stability of power systems with the inclusion of IBGs. This review article is intended to be a preface to the Special Issue on Voltage Stability of Microgrids in Power Systems. It presents a comprehensive review of the literature on voltage stability of power systems with a relatively high percentage of IBGs in the generation mix of the system. As the research is developing rapidly in this field, it is understood that by the time that this article is published, and further in the future, there will be many more new developments in this area. Certainly, other articles in this special issue will highlight some other important aspects of the voltage stability of microgrids

Oligopolistic and oligopsonistic bilateral electricity market modeling using hierarchical conjectural variation equilibrium method

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel UniversityAn electricity market is very complex and different in its nature, when compared to other commodity markets. The introduction of competition and restructuring in global electricity markets brought more complexity and major changes in terms of governance, ownership and technical and market operations. In a liberalized electricity market, all market participants are responsible for their own decisions; therefore, all the participants are trying to make profit by participating in electricity trading. There are different types of electricity market, and in this research a bilateral electricity market has been specifically considered. This thesis not only contributes with regard to the reviewing UK electricity market as an example of a bilateral electricity market with more than 97% of long-term bilateral trading, but also proposes a dual aspect point of view with regard to the bilateral electricity market by splitting the generation and supply sides of the wholesale market. This research aims at maximizing the market participants’ profits and finds the equilibrium point of the bilateral market; hence, various methods such as equilibrium models have been reviewed with regard to management of the risks (e.g. technical and financial risks) of participating in the electricity market. This research proposes a novel Conjectural Variation Equilibrium (CVE) model for bilateral electricity markets, to reduce the market participants’ exposure to risks and maximize the profits. Hence, generation companies’ behaviors and strategies in an imperfect bilateral market environment, oligopoly, have been investigated by applying the CVE method. By looking at the bilateral market from an alternative aspect, the supply companies’ behaviors in an oligopsony environment have also been taken into consideration. At the final stage of this research, the ‘matching’ of both quantity and price between oligopolistic and oligopsonistic markets has been obtained through a novel-coordinating algorithm that includes CVE model iterations of both markets. Such matching can be achieved by adopting a hierarchical optimization approach, using the Matlab Patternsearch optimization algorithm, which acts as a virtual broker to find the equilibrium point of both markets. Index Terms-- Bilateral electricity market, Oligopolistic market, Oligopsonistic market, Conjectural Variation Equilibrium method, Patternsearch optimization, Game theory, Hierarchical optimization metho

Proceedings, MSVSCC 2017

Proceedings of the 11th Annual Modeling, Simulation & Visualization Student Capstone Conference held on April 20, 2017 at VMASC in Suffolk, Virginia. 211 pp

Intelligent Transportation Related Complex Systems and Sensors

Building around innovative services related to different modes of transport and traffic management, intelligent transport systems (ITS) are being widely adopted worldwide to improve the efficiency and safety of the transportation system. They enable users to be better informed and make safer, more coordinated, and smarter decisions on the use of transport networks. Current ITSs are complex systems, made up of several components/sub-systems characterized by time-dependent interactions among themselves. Some examples of these transportation-related complex systems include: road traffic sensors, autonomous/automated cars, smart cities, smart sensors, virtual sensors, traffic control systems, smart roads, logistics systems, smart mobility systems, and many others that are emerging from niche areas. The efficient operation of these complex systems requires: i) efficient solutions to the issues of sensors/actuators used to capture and control the physical parameters of these systems, as well as the quality of data collected from these systems; ii) tackling complexities using simulations and analytical modelling techniques; and iii) applying optimization techniques to improve the performance of these systems. It includes twenty-four papers, which cover scientific concepts, frameworks, architectures and various other ideas on analytics, trends and applications of transportation-related data

Proceedings, MSVSCC 2016

Proceedings of the 10th Annual Modeling, Simulation & Visualization Student Capstone Conference held on April 14, 2016 at VMASC in Suffolk, Virginia

Sensing of complex buildings and reconstruction into photo-realistic 3D models

The 3D reconstruction of indoor and outdoor environments has received an interest only recently, as companies began to recognize that using reconstructed models is a way to generate revenue through location-based services and advertisements. A great amount of research has been done in the field of 3D reconstruction, and one of the latest and most promising applications is Kinect Fusion, which was developed by Microsoft Research. Its strong points are the real-time intuitive 3D reconstruction, interactive frame rate, the level of detail in the models, and the availability of the hardware and software for researchers and enthusiasts. A representative effort towards 3D reconstruction is the Point Cloud Library (PCL). PCL is a large scale, open project for 2D/3D image and point cloud processing. On December 2011, PCL made available an implementation of Kinect Fusion, namely KinFu. KinFu emulates the functionality provided in Kinect Fusion. However, both implementations have two major limitations: 1. The real-time reconstruction takes place only within a cube with a size of 3 meters per axis. The cube's position is fixed at the start of execution, and any object outside of this cube is not integrated into the reconstructed model. Therefore the volume that can be scanned is always limited by the size of the cube. It is possible to manually align many small-size cubes into a single large model, however this is a time-consuming and difficult task, especially when the meshes have complex topologies and high polygon count, as is the case with the meshes obtained from KinFu. 2. The output mesh does not have any color textures. There are some at-tempts to add color in the output point cloud; however, the resulting effect is not photo-realistic. Applying photo-realistic textures to a model can enhance the user experience, even when the model has a simple topology. The main goal of this project is to design and implement a system that captures large indoor environments and generates 3D photo-realistic large indoor models in real time. This report describes an extended version of the KinFu system. The extensions overcome the scalability and texture reconstruction limitations using commodity hardware and open-source software. The complete hardware setup used in this project is worth €2,000, which is comparable to the cost of a single professional laser scanner. The software is released under BSD license, which makes it completely free to use and commercialize. The system has been integrated into the open-source PCL project. The immediate benefits are three-fold: the system becomes a potential industry standard, it is maintained and extended by many developers around the world with no addition-al cost to the VCA group, and it can reduce the application development time by reusing numerous state-of-the-art algorithms