Selecting eco-friendly thermal systems for the "Vittoriale Degli Italiani" historic museum building

Thermal systems installed in museums should guarantee the maintenance of the optimal hygrothermal parameters ranges for the conservation of their collection materials. Considering the preservation of historic buildings, according to their historical and landscaping constraints, not all the thermal system typologies could be installed in these buildings' typologies. Therefore, the main aim of this paper is to present some indications for the choice of the best thermal system solutions for a considered historic museum building, called Vittoriale degli Italiani, in the north of Italy, taking into account their installation feasibility and their related environmental impacts. The methodology includes a monitoring of the current hygrothermal parameters as well as the assessment of design heat and cooling loads related to the maintenance of the optimal hygrothermal parameters ranges for the conservation of collection materials. In addition, a Life Cycle Assessment (LCA) of each selected system typology is considered for highlighting the most eco-friendly solution among the suitable ones. The obtained results highlights the feasible thermal system solutions able to maintain the hygrothermal parameters between the optimal ranges with a lower environmental impact in the Vittoriale degli Italiani historic museum building

An investigation of air and water dual adjustment decoupling control of surface heat exchanger

The terminal equipment of central cooling system accounts for a significant proportion of the total system's energy consumption. Therefore, it is important to reduce the terminal equipment energy consumption in central air conditioning system. In this study, the difference of the effect of the chilled water flow rate and air supply rate on the surface cooler during the heat transfer process is taken into full account. Matlab/Simulink simulation software is used to model and simulate the heat transfer of surface cooler of the main terminal equipment of air conditioning system. Simulation tests and experimental validations are conducted by using variable chilled water flow rate and variable air supply rate control mode separately. The experiment results show that the simulation model can effectively predict the heat transfer performance of heat exchanger. Further, the study introduced a dual feedback control mode, which synchronously regulates the chilled water flow rate and air supply rate. Also, under certain conditions, the complex heat transfer process of the surface cooler can be decoupled, and single variable control pattern is used to separately regulate the chilled water flow rate and air supply rate. This can effectively shorten the system regulation time, reduce overshoot and improve control performance

A Prototype Toolkit For Evaluating Indoor Environmental Quality In Commercial Buildings

Measurement of building environmental parameters is often complex, expensive, and not easily proceduralized in a manner that covers all commercial buildings. Evaluating building indoor environmental quality performance is therefore not standard practice. This project developed a prototype toolkit that addressed existing barriers to widespread indoor environmental quality performance evaluation. A toolkit with both hardware and software elements was designed for practitioners around the indoor environmental quality requirements of the American Society of Heating, Refrigeration and Air Conditioning Engineers / Chartered Institution of Building Services / United States Green Building Council Performance Measurement Protocols. This unique toolkit was built on a wireless mesh network with a web-based data collection, analysis, and reporting application. The toolkit provided a fast, robust deployment of sensors, real-time data analysis, Performance Measurement Protocol-based analysis methods and a scorecard and report generation tools. A web-enabled Geographic Information System-based metadata collection system also reduced field-study deployment time. The toolkit was evaluated through three case studies, which were discussed in this report

Using Personal Environmental Comfort Systems to Mitigate the Impact of Occupancy Prediction Errors on HVAC Performance

Heating, Ventilation and Air Conditioning (HVAC) consumes a significant fraction of energy in commercial buildings. Hence, the use of optimization techniques to reduce HVAC energy consumption has been widely studied. Model predictive control (MPC) is one state of the art optimization technique for HVAC control which converts the control problem to a sequence of optimization problems, each over a finite time horizon. In a typical MPC, future system state is estimated from a model using predictions of model inputs, such as building occupancy and outside air temperature. Consequently, as prediction accuracy deteriorates, MPC performance--in terms of occupant comfort and building energy use--degrades. In this work, we use a custom-built building thermal simulator to systematically investigate the impact of occupancy prediction errors on occupant comfort and energy consumption. Our analysis shows that in our test building, as occupancy prediction error increases from 5\% to 20\% the performance of an MPC-based HVAC controller becomes worse than that of even a simple static schedule. However, when combined with a personal environmental control (PEC) system, HVAC controllers are considerably more robust to prediction errors. Thus, we quantify the effectiveness of PECs in mitigating the impact of forecast errors on MPC control for HVAC systems.Comment: 21 pages, 13 figure

Cool roof technology in London: An experimental and modelling study

This is the post-print version of the final paper published in Journal of Energy and Buildings. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2011 Elsevier B.V.One of the primary reasons for the application of cool materials is their energy and associated environmental impact on the built environment. Cool materials are usually applied on the roof of buildings to reduce cooling energy demand. The relative benefits of this reduction depend on the construction of the building, external weather conditions and use of the building. This paper examines the impact from the application of a reflective paint on a flat roof in a naturally ventilated office building in the area of London, UK where the climate is moderate with high heating demand by buildings. The environmental conditions (internal/external air and surface temperatures) of the building were monitored before and after the application of the cool roof during the summer. It was found that internal temperatures were reduced after the application of the cool roof. The building was modelled using TRNSYS and the model was calibrated successfully using the measurements. A parametric analysis was carried out by varying the reflectivity and insulation of the roof and ventilation rate; the heating and cooling demand for a year was calculated using the Summer Design Year for London as the weather file. It was found that cooling demand is significantly reduced, heating demand is increased and the total energy savings vary between 1 and 8.5% relative to an albedo of 0.1 for the same conditions. In free floating (naturally ventilated) buildings summer comfort is improved but there is a penalty of increased heating energy during the winter. Thermal comfort can be improved by an average of 2.5 °C (operative temperature difference for a change of 0.5 in albedo) but heating demand could be increased by 10% for a ventilation rate of 2 air changes per hour. The results indicate that in the case of temperate climates the type, operation and thermal characteristics of the building should be considered carefully to determine potential benefits of the application of cool roof technology. For the examined case-study, it was found that a roof reflectivity of 0.6–0.7 is the optimum value to achieve energy savings in a cooled office, improve summer internal thermal conditions in a non-cooled office (albeit with some heating energy penalty). It indicates that it is a suitable strategy for refurbishment of existing offices to improve energy efficiency or internal environmental conditions in the summer and should be considered in the design of new offices together with other passive energy efficient strategies.Intelligent Energy Europe (IEE