Modeling and Simulation of Subthreshold Characteristics of Short-Channel Fully-Depleted Recessed-Source/Drain SOI MOSFETs

Non-conventional metal-oxide-semiconductor (MOS) devices have attracted researchers‟ attention for future ultra-large-scale-integration (ULSI) applications since the channel length of conventional MOS devices approached the physical limit. Among the non-conventional CMOS devices which are currently being pursued for the future ULSI, the fully-depleted (FD) SOI MOSFET is a serious contender as the SOI MOSFETs possess some unique features such as enhanced short-channel effects immunity, low substrate leakage current, and compatibility with the planar CMOS technology. However, due to the ultra-thin source and drain regions, FD SOI MOSFETs possess large series resistance which leads to the poor current drive capability of the device despite having excellent short-channel characteristics. To overcome this large series resistance problem, the source/drain area may be increased by extending S/D either upward or downward. Hence, elevated-source/drain (E-S/D) and recessed-source/drain (Re-S/D) are the two structures which can be used to minimize the series resistance problem. Due to the undesirable issues such as parasitic capacitance, current crowding effects, etc. with E-S/D structure, the Re-S/D structure is a better choice. The FD Re-S/D SOI MOSFET may be an attractive option for sub-45nm regime because of its low parasitic capacitances, reduced series resistance, high drive current, very high switching speed and compatibility with the planar CMOS technology. The present dissertation is to deal with the theoretical modeling and computer-based simulation of the FD SOI MOSFETs in general, and recessed source/drain (Re-S/D) ultra-thin-body (UTB) SOI MOSFETs in particular. The current drive capability of Re-S/D UTB SOI MOSFETs can be further improved by adopting the dual-metal-gate (DMG) structure in place of the conventional single-metal-gate-structure. However, it will be interesting to see how the presence of two metals as gate contact changes the subthreshold characteristics of the device. Hence, the effects of adopting DMG structure on the threshold voltage, subthreshold swing and leakage current of Re-S/D UTB SOI MOSFETs have been studied in this dissertation. Further, high-k dielectric materials are used in ultra-scaled MOS devices in order to cut down the quantum mechanical tunneling of carriers. However, a physically thick gate dielectric causes fringing field induced performance degradation. Therefore, the impact of high-k dielectric materials on subthreshold characteristics of Re-S/D SOI MOSFETs needs to be investigated. In this dissertation, various subthreshold characteristics of the device with high-k gate dielectric and metal gate electrode have been investigated in detail. Moreover, considering the variability problem of threshold voltage in ultra-scaled devices, the presence of a back-gate bias voltage may be useful for ultimate tuning of the threshold voltage and other characteristics. Hence, the impact of back-gate bias on the important subthreshold characteristics such as threshold voltage, subthreshold swing and leakage currents of Re-S/D UTB SOI MOSFETs has been thoroughly analyzed in this dissertation. The validity of the analytical models are verified by comparing model results with the numerical simulation results obtained from ATLAS™, a device simulator from SILVACO Inc

A novel deep submicron bulk planar sizing strategy for low energy subthreshold standard cell libraries

Engineering andPhysical Science ResearchCouncil (EPSRC) and Arm Ltd for providing funding in the form of grants and studentshipsThis work investigates bulk planar deep submicron semiconductor physics in an attempt to improve standard cell libraries aimed at operation in the subthreshold regime and in Ultra Wide Dynamic Voltage Scaling schemes. The current state of research in the field is examined, with particular emphasis on how subthreshold physical effects degrade robustness, variability and performance. How prevalent these physical effects are in a commercial 65nm library is then investigated by extensive modeling of a BSIM4.5 compact model. Three distinct sizing strategies emerge, cells of each strategy are laid out and post-layout parasitically extracted models simulated to determine the advantages/disadvantages of each. Full custom ring oscillators are designed and manufactured. Measured results reveal a close correlation with the simulated results, with frequency improvements of up to 2.75X/2.43X obs erved for RVT/LVT devices respectively. The experiment provides the first silicon evidence of the improvement capability of the Inverse Narrow Width Effect over a wide supply voltage range, as well as a mechanism of additional temperature stability in the subthreshold regime. A novel sizing strategy is proposed and pursued to determine whether it is able to produce a superior complex circuit design using a commercial digital synthesis flow. Two 128 bit AES cores are synthesized from the novel sizing strategy and compared against a third AES core synthesized from a state-of-the-art subthreshold standard cell library used by ARM. Results show improvements in energy-per-cycle of up to 27.3% and frequency improvements of up to 10.25X. The novel subthreshold sizing strategy proves superior over a temperature range of 0 °C to 85 °C with a nominal (20 °C) improvement in energy-per-cycle of 24% and frequency improvement of 8.65X. A comparison to prior art is then performed. Valid cases are presented where the proposed sizing strategy would be a candidate to produce superior subthreshold circuits

Ultra Low Power Design for Digital CMOS Circuits Operating Near Threshold

Circuits operating in the subthreshold region are synonymous to low energy operation. However, the penalty in performance is colossal. In this paper, we investigate how designing in moderate inversion region recuperates some of that lost performance, while remaining very near to the minimum energy point. An power based minimum energy delay modeling that is continuous over the weak, moderate, and strong inversion regions is presented. The effect of supply voltage and device sizing on the minimum energy and performance is determined. The proposed model is utilized to design a temperature to time generator at 32nm technology node asthe application of the proposed model

Comprehensive Analytical Models of Random Variations in Subthreshold MOSFET’s High-Frequency Performances

Subthreshold MOSFET has been adopted in many low power VHF circuits/systems in which their performances are mainly determined by three major high-frequency characteristics of intrinsic subthreshold MOSFET, i.e., gate capacitance, transition frequency, and maximum frequency of oscillation. Unfortunately, the physical level imperfections and variations in manufacturing process of MOSFET cause random variations in MOSFET’s electrical characteristics including the aforesaid high-frequency ones which in turn cause the undesired variations in those subthreshold MOSFET-based VHF circuits/systems. As a result, the statistical/variability aware analysis and designing strategies must be adopted for handling these variations where the comprehensive analytical models of variations in those major high-frequency characteristics of subthreshold MOSFET have been found to be beneficial. Therefore, these comprehensive analytical models have been reviewed in this chapter where interesting related issues have also been discussed. Moreover, an improved model of variation in maximum frequency of oscillation has also been proposed

Silicon on ferroelectric insulator field effect transistor (SOF-FET) a new device for the next generation ultra low power circuits

Title from PDF of title page, viewed on March 12, 2014Thesis advisor: Masud H. ChowdhuryVitaIncludes bibliographical references (pages 116-131)Thesis (M. S.)--School of Computer and Engineering. University of Missouri--Kansas City, 2013Field effect transistors (FETs) are the foundation for all electronic circuits and processors. These devices have progressed massively to touch its final steps in subnanometer level. Left and right proposals are coming to rescue this progress. Emerging nano-electronic devices (resonant tunneling devices, single-atom transistors, spin devices, Heterojunction Transistors rapid flux quantum devices, carbon nanotubes, and nanowire devices) took a vast share of current scientific research. Non-Si electronic materials like III-V heterostructure, ferroelectric, carbon nanotubes (CNTs), and other nanowire based designs are in developing stage to become the core technology of non-classical CMOS structures. FinFET present the current feasible commercial nanotechnology. The scalability and low power dissipation of this device allowed for an extension of silicon based devices. High short channel effect (SCE) immunity presents its major advantage. Multi-gate structure comes to light to improve the gate electrostatic over the channel. The new structure shows a higher performance that made it the first candidate to substitute the conventional MOSFET. The device also shows a future scalability to continue Moor’s Law. Furthermore, the device is compatible with silicon fabrication process. Moreover, the ultra-low-power (ULP) design required a subthreshold slope lower than the thermionic-emission limit of 60mV/ decade (KT/q). This value was unbreakable by the new structure (SOI-FinFET). On the other hand most of the previews proposals show the ability to go beyond this limit. However, those pre-mentioned schemes have publicized a very complicated physics, design difficulties, and process non-compatibility. The objective of this research is to discuss various emerging nano-devices proposed for ultra-low-power designs and their possibilities to replace the silicon devices as the core technology in the future integrated circuit. This thesis proposes a novel design that exploits the concept of negative capacitance. The new field effect transistor (FET) based on ferroelectric insulator named Silicon-On-Ferroelectric Insulator Field Effect Transistor (SOF-FET). This proposal is a promising methodology for future ultra-lowpower applications, because it demonstrates the ability to replace the silicon-bulk based MOSFET, and offers subthreshold swing significantly lower than 60mV/decade and reduced threshold voltage to form a conducting channel. The SOF-FET can also solve the issue of junction leakage (due to the presence of unipolar junction between the top plate of the negative capacitance and the diffused areas that form the transistor source and drain). In this device the charge hungry ferroelectric film already limits the leakage.Abstract -- List of illustrations - List of tables -- Acknowledgements -- Dedication -- Introduction -- Carbon nanotube field effect transistor -- Multi-gate transistors -FinFET -- Subthreshold swing -- Tunneling field effect transistors -- I-mos and nanowire fets -- Ferroelectric based field effect transistors -- An analytical model to approximate the subthreshold swing for soi-finfet -- Silicon-on-ferroelectric insulator field effect transistor (SOF-FET) -- Current-voltage characteristics of sof-fet -- Advantages, manufacturing process and future work of the proposed device -- Appendix -- Reference

Analysis of the subthreshold CMOS logic inverter

AbstractThere is no doubt that operating the MOSFET transistor in the subthreshold region, where the power-supply voltage is less than the threshold voltage, has an increasing importance due to the reduced power consumption. In this paper, the analysis of the CMOS logic inverter in the subthreshold region is addressed quantitatively with the static and dynamic characteristics investigated and compared with that operating in the superthreshold region. Specifically, compact-form equations are derived for the output-low voltage, output-high voltage, maximum-input voltage at logic “0,” minimum-input voltage at logic “1,” and threshold voltage of the inverter. Also, the static-power consumption and dynamic-power consumption are investigated and equations are derived for them. Compact-form expressions are derived for the low-to-high and the high-to-low propagation delays along with the fan-out. Qualitative discussions are also provided. The results of the quantitative analysis are verified by comparison with the simulation results adopting the 65nm CMOS technology

Design, Modeling and Analysis of Non-classical Field Effect Transistors

Transistor scaling following per Moore\u27s Law slows down its pace when entering into nanometer regime where short channel effects (SCEs), including threshold voltage fluctuation, increased leakage current and mobility degradation, become pronounced in the traditional planar silicon MOSFET. In addition, as the demand of diversified functionalities rises, conventional silicon technologies cannot satisfy all non-digital applications requirements because of restrictions that stem from the fundamental material properties. Therefore, novel device materials and structures are desirable to fuel further evolution of semiconductor technologies. In this dissertation, I have proposed innovative device structures and addressed design considerations of those non-classical field effect transistors for digital, analog/RF and power applications with projected benefits. Considering device process difficulties and the dramatic fabrication cost, application-oriented device design and optimization are performed through device physics analysis and TCAD modeling methodology to develop design guidelines utilizing transistor\u27s improved characteristics toward application-specific circuit performance enhancement. Results support proposed device design methodologies that will allow development of novel transistors capable of overcoming limitation of planar nanoscale MOSFETs. In this work, both silicon and III-V compound devices are designed, optimized and characterized for digital and non-digital applications through calibrated 2-D and 3-D TCAD simulation. For digital functionalities, silicon and InGaAs MOSFETs have been investigated. Optimized 3-D silicon-on-insulator (SOI) and body-on-insulator (BOI) FinFETs are simulated to demonstrate their impact on the performance of volatile memory SRAM module with consideration of self-heating effects. Comprehensive simulation results suggest that the current drivability degradation due to increased device temperature is modest for both devices and corresponding digital circuits. However, SOI FinFET is recommended for the design of low voltage operation digital modules because of its faster AC response and better SCEs management than the BOI structure. The FinFET concept is also applied to the non-volatile memory cell at 22 nm technology node for low voltage operation with suppressed SCEs. In addition to the silicon technology, our TCAD estimation based on upper projections show that the InGaAs FinFET, with superior mobility and improved interface conditions, achieve tremendous drive current boost and aggressively suppressed SCEs and thereby a strong contender for low-power high-performance applications over the silicon counterpart. For non-digital functionalities, multi-fin FETs and GaN HEMT have been studied. Mixed-mode simulations along with developed optimization guidelines establish the realistic application potential of underlap design of silicon multi-Fin FETs for analog/RF operation. The device with underlap design shows compromised current drivability but improve analog intrinsic gain and high frequency performance. To investigate the potential of the novel N-polar GaN material, for the first time, I have provided calibrated TCAD modeling of E-mode N-polar GaN single-channel HEMT. In this work, I have also proposed a novel E-mode dual-channel hybrid MIS-HEMT showing greatly enhanced current carrying capability. The impact of GaN layer scaling has been investigated through extensive TCAD simulations and demonstrated techniques for device optimization

Performance analysis of ultrathin junctionless double gate vertical MOSFETs

The main challenge in MOSFET minituarization is to form an ultra-shallow source/drain (S/D) junction with high doping concentration gradient, which requires an intricate S/D and channel engineering. Junctionless MOSFET configuration is an alternative solution for this issue as the junction and doping gradients is totally eliminated. A process simulation has been developed to investigate the impact of junctionless configuration on the double-gate vertical MOSFET. The result proves that the performance of junctionless double-gate vertical MOSFETs (JLDGVM) are superior to the conventional junctioned double-gate vertical MOSFETs (JDGVM). The results reveal that the drain current (ID) of the n-JLVDGM and p-JLVDGM could be tremendously enhanced by 57% and 60% respectively as the junctionless configuration was applied to the double-gate vertical MOSFET. In addition, junctionless devices also exhibit larger ION/IOFF ratio and smaller subthreshold slope compared to the junction devices, implying that the junctionless devices have better power consumption and faster switching capability