Kollektive Perzeption in fahrzeugbasierten Ad-hoc Netzwerken

In combination with the current developments in the area of automatically driving vehicles, the introduction of inter-vehicle communication plays a crucial role for realising the long-term objective of what is known as cooperative driving. A cornerstone for the expansion of automated vehicles is their thorough understanding of the current driving environment. For this purpose, each vehicle generates an environment model containing information about other perceived traffic participants and objects. Local perception sensors are important data providers for this model, as they contribute implicit knowledge about the environment. In combination with a direct communication link between traffic participants, explicit knowledge can be added to the environment model as well. The key concept developed within this thesis is called Collective Perception: it focuses on sharing data gathered by local perception sensors of one vehicle with other traffic participants by means of inter-vehicle communication. As a result of this concept, future applications relying on a comprehensive understanding of the current driving environment are made feasible. The analyses presented in this thesis employ a vehicular ad-hoc network (VANET) based on the standardised framework of the European IEEE 802.11p-based ITS G5 protocol stack for inter-vehicle communication. The effectiveness of the technology relies on an existing communication link between a sufficient number of communication partners - the critical mass. The expansion of inter-vehicle communication, however, can be supported by capacitating indirect effects. Collective Perception is one representative of these effects, as the information density within the network between the vehicles is increased, even at low market penetration rates. At the core of Collective Perception stands the introduction of a message format which serves as a vehicle for the exchange of sensor data within a VANET. The development of the message is influenced by two perspectives: First, the vehicle perspective affects the relevant contents of the message required by data-fusion processes and application algorithms. Second, from the network perspective, constraints resulting from the network stack and effects caused by congestion control mechanisms have to be considered. This thesis addresses both perspectives to develop a holistic concept for exchanging sensor data within a VANET.Im Zusammenhang mit den aktuellen Entwicklungen im Themenbereich automatisch fahrender Fahrzeuge spielt die Einführung der Fahrzeug-zu-Fahrzeug-Kommunikation eine zunehmend wichtige Rolle, um langfristig kooperatives Fahren zu realisieren. Eine Voraussetzung für dessen Umsetzung ist dabei die umfassende Wahrnehmung der aktuellen Fahrumgebung. Jedes Fahrzeug erstellt dafür ein sogenanntes Umfeldmodell, welches Informationen über andere Verkehrsteilnehmer und Objekte beinhaltet. Eine wichtige Datenquelle für dieses Modell sind zum einen lokale Umfeldsensoren, welche implizites Wissen über die aktuelle Fahrumgebung beisteuern. Zum anderen kann dem Umfeldmodell bei einer direkten Kommunikationsverbindung mit anderen Verkehrsteilnehmern auch explizites Wissen hinzugefügt werden. Im Rahmen dieser Arbeit wird ein Konzept zur Realisierung der sogenannten kollektiven Wahrnehmung entwickelt: Hierbei wird Fahrzeugen der Austausch lokaler Sensordaten mit anderen Verkehrsteilnehmern unter Verwendung der Fahrzeug-zu-Fahrzeug-Kommunikation ermöglicht. Somit können zukünftige Fahrerassistenzfunktionen auf ein umfassenderes Umfeldmodell zugreifen. Den im Rahmen der Arbeit durchgeführten Analysen liegt ein fahrzeugbasiertes Ad-hoc Netzwerk zugrunde, welches auf dem europäischen IEEE 802.11p basierten ITS G5 Protokollstapel beruht. Die Effektivität der Technologie fußt hierbei auf der Existenz der sogenannten kritischen Masse: Eine ausreichende Anzahl an Kommunikationspartnern muss zugegen sein, damit der Technologie ein Nutzen zugemessen werden kann. Die Verbreitung der Technologie kann jedoch durch indirekte Effekte unterstützt werden. Die kollektive Wahrnehmung ist ein Repräsentant dieser indirekten Effekte, da die Informationsdichte in dem zwischen den Fahrzeugen bestehenden Netzwerk selbst bei niedrigen Marktausstattungsraten erhöht wird. Im Rahmen der Arbeit wird daher ein neues Nachrichtenformat entwickelt, welches von zwei Perspektiven beeinflusst: Die Sicht der fahrzeugseitigen Assistenzsysteme und deren Datenfusionsalgorithmen beeinflusst die notwendigen Inhalte der Nachricht. Weiterhin werden aus der Netzwerksicht durch Mechanismen wie denen der Lastkontrolle und den bestehenden Nachrichtengrößenbeschränkungen spezifische Anforderungen gestellt. Beide Untersuchungen werden dabei in der Arbeit zur Erstellung eines ganzheitlichen Konzeptes für die kollektive Wahrnehmung verbunden

Natural and Technological Hazards in Urban Areas

Natural hazard events and technological accidents are separate causes of environmental impacts. Natural hazards are physical phenomena active in geological times, whereas technological hazards result from actions or facilities created by humans. In our time, combined natural and man-made hazards have been induced. Overpopulation and urban development in areas prone to natural hazards increase the impact of natural disasters worldwide. Additionally, urban areas are frequently characterized by intense industrial activity and rapid, poorly planned growth that threatens the environment and degrades the quality of life. Therefore, proper urban planning is crucial to minimize fatalities and reduce the environmental and economic impacts that accompany both natural and technological hazardous events

A Review of Resonant Converter Control Techniques and The Performances

paper first discusses each control technique and then gives experimental results and/or performance to highlights their merits. The resonant converter used as a case study is not specified to just single topology instead it used few topologies such as series-parallel resonant converter (SPRC), LCC resonant converter and parallel resonant converter (PRC). On the other hand, the control techniques presented in this paper are self-sustained phase shift modulation (SSPSM) control, self-oscillating power factor control, magnetic control and the H-∞ robust control technique

State-Feedback Controller Based on Pole Placement Technique for Inverted Pendulum System

This paper presents a state space control technique for inverted pendulum system using simulation and real experiment via MATLAB/SIMULINK software. The inverted pendulum is difficult system to control in the field of control engineering. It is also one of the most important classical control system problems because of its nonlinear characteristics and unstable system. It has three main problems that always appear in control application which are nonlinear system, unstable and non-minimumbehavior phase system. This project will apply state feedback controller based on pole placement technique which is capable in stabilizing the practical based inverted pendulum at vertical position. Desired design specifications which are 4 seconds settling time and 5 % overshoot is needed to apply in full state feedback controller based on pole placement technique. First of all, the mathematical model of an inverted pendulum system is derived to obtain the state space representation of the system. Then, the design phase of the State-Feedback Controller can be conducted after linearization technique is performed to the nonlinear equation with the aid of mathematical aided software such as Mathcad. After that, the design is simulated using MATLAB/Simulink software. The controller design of the inverted pendulum system is verified using simulation and experiment test. Finally the controller design is compared with PID controller for benchmarking purpose

A SIMULATION STUDY OF STATE-FEEDBACK CONTROL METHOD FOR ELECTRO HYDRAULIC SERVO MODEL

Electro hydraulic servo system is used by many industries due to its ability to impart large forces. It also has advantage in term of fast response and robustness. The electro hydraulic system suffered from errors of the transient response which are steady state error, settling time and the ripples. It is crucial to design a controller for the system to ensure the reliability of the system. Aiming at the characteristic of the system, steady state feedback control method is designed to compensate the error. The analysis of the system is done based on the transient response specifically on the actuator part. MATLAB Simulink is used as the simulation software to evaluate the force performance of state feedback controller method. The steady state error, settling time and ripple are observed and recorded for each controller. Three methods is applied, which are full feedback, state feedback with feed forward and integral control are compared with proportional, integral and derivatives (PID) controller. The result of each controller shows the differences performance. Based on the simulation results, the feedforward technique is found to be the best control technique for the electro hydraulic servo system due to the requirement performance such as percent overshoot, settling time, rise time and zero steady state error. This good result will directly benefit industries that use electro hydraulic system as their actuator for production machines