369 research outputs found

    LDPC concatenated space-time block coded system in multipath fading environment: Analysis and evaluation

    Get PDF
    Irregular low-density parity-check (LDPC) codes have been found to show exceptionally good performance for single antenna systems over a wide class of channels. In this paper, the performance of LDPC codes with multiple antenna systems is investigated in flat Rayleigh and Rician fading channels for different modulation schemes. The focus of attention is mainly on the concatenation of irregular LDPC codes with complex orthogonal space-time codes. Iterative decoding is carried out with a density evolution method that sets a threshold above which the code performs well. For the proposed concatenated system, the simulation results show that the QAM technique achieves a higher coding gain of 8.8 dB and 3.2 dB over the QPSK technique in Rician (LOS) and Rayleigh (NLOS) faded environments respectively

    Dispensing with channel estimation: differentially modulated cooperative wireless communications

    No full text
    As a benefit of bypassing the potentially excessive complexity and yet inaccurate channel estimation, differentially encoded modulation in conjunction with low-complexity noncoherent detection constitutes a viable candidate for user-cooperative systems, where estimating all the links by the relays is unrealistic. In order to stimulate further research on differentially modulated cooperative systems, a number of fundamental challenges encountered in their practical implementations are addressed, including the time-variant-channel-induced performance erosion, flexible cooperative protocol designs, resource allocation as well as its high-spectral-efficiency transceiver design. Our investigations demonstrate the quantitative benefits of cooperative wireless networks both from a pure capacity perspective as well as from a practical system design perspective

    Near-capacity MIMOs using iterative detection

    No full text
    In this thesis, Multiple-Input Multiple-Output (MIMO) techniques designed for transmission over narrowband Rayleigh fading channels are investigated. Specifically, in order to providea diversity gain while eliminating the complexity of MIMO channel estimation, a Differential Space-Time Spreading (DSTS) scheme is designed that employs non-coherent detection. Additionally, in order to maximise the coding advantage of DSTS, it is combined with Sphere Packing (SP) modulation. The related capacity analysis shows that the DSTS-SP scheme exhibits a higher capacity than its counterpart dispensing with SP. Furthermore, in order to attain additional performance gains, the DSTS system invokes iterative detection, where the outer code is constituted by a Recursive Systematic Convolutional (RSC) code, while the inner code is a SP demapper in one of the prototype systems investigated, while the other scheme employs a Unity Rate Code (URC) as its inner code in order to eliminate the error floor exhibited by the system dispensing with URC. EXIT charts are used to analyse the convergence behaviour of the iteratively detected schemes and a novel technique is proposed for computing the maximum achievable rate of the system based on EXIT charts. Explicitly, the four-antenna-aided DSTSSP system employing no URC precoding attains a coding gain of 12 dB at a BER of 10-5 and performs within 1.82 dB from the maximum achievable rate limit. By contrast, the URC aidedprecoded system operates within 0.92 dB from the same limit.On the other hand, in order to maximise the DSTS system’s throughput, an adaptive DSTSSP scheme is proposed that exploits the advantages of differential encoding, iterative decoding as well as SP modulation. The achievable integrity and bit rate enhancements of the system are determined by the following factors: the specific MIMO configuration used for transmitting data from the four antennas, the spreading factor used and the RSC encoder’s code rate.Additionally, multi-functional MIMO techniques are designed to provide diversity gains, multiplexing gains and beamforming gains by combining the benefits of space-time codes, VBLASTand beamforming. First, a system employing Nt=4 transmit Antenna Arrays (AA) with LAA number of elements per AA and Nr=4 receive antennas is proposed, which is referred to as a Layered Steered Space-Time Code (LSSTC). Three iteratively detected near-capacity LSSTC-SP receiver structures are proposed, which differ in the number of inner iterations employed between the inner decoder and the SP demapper as well as in the choice of the outer code, which is either an RSC code or an Irregular Convolutional Code (IrCC). The three systems are capable of operating within 0.9, 0.4 and 0.6 dB from the maximum achievable rate limit of the system. A comparison between the three iteratively-detected schemes reveals that a carefully designed two-stage iterative detection scheme is capable of operating sufficiently close to capacity at a lower complexity, when compared to a three-stage system employing a RSC or a two-stage system using an IrCC as an outer code. On the other hand, in order to allow the LSSTC scheme to employ less receive antennas than transmit antennas, while still accommodating multiple users, a Layered Steered Space-Time Spreading (LSSTS) scheme is proposed that combines the benefits of space-time spreading, V-BLAST, beamforming and generalised MC DS-CDMA. Furthermore, iteratively detected LSSTS schemes are presented and an LLR post-processing technique is proposed in order to improve the attainable performance of the iteratively detected LSSTS system.Finally, a distributed turbo coding scheme is proposed that combines the benefits of turbo coding and cooperative communication, where iterative detection is employed by exchanging extrinsic information between the decoders of different single-antenna-aided users. Specifically, the effect of the errors induced in the first phase of cooperation, where the two users exchange their data, on the performance of the uplink in studied, while considering different fading channel characteristics

    Design Of Vehicular Communication Systems Employing Physical Layer Network Coding Over Cascaded Fading Channels

    Get PDF
    Tez (Doktora) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2017Thesis (Ph.D.) -- İstanbul Technical University, Institute of Science and Technology, 2017İnsandan insana ses taşıma odaklı ikinci nesil (2nd Generation, 2G) mobil haberleşme teknolojilerinin kaydettiği başarıdan sonra telsiz iletişim alanındaki eğilimler insandan-makinaya olarak adlandırılan veri taşıma odaklı telsiz iletişim teknolojilerine (3rd Generation, 3G) doğru yönelmiştir. Bu veri taşıma odaklı iletişim konsepti ile birlikte son kullanıcılar multi-media mesajlaşma, internet erişimi, e-ticaret ve video paylaşımı gibi çok çeşitli telsiz iletişim servislerine kavuşma imkanı buldular. Telsiz iletişimdeki başarılı ve hızlı ilerlemenin bir sonucu olarak günümüzde bu alanda yapılan araştırma-geliştirme çalışmalarının yönü yüksek veri iletim hızları (>100Mb/s) ve daha yüksek bant-verimliliği (>10b/s) gerektiren makineden-makineye (Mactine-to-Machine, M2M) telsiz iletişime doğru yönelmiş bulunmaktadır. M2M telsiz iletişiminde bir araştırma/uygulama alanı araçtan-nesnelere (Vehicle-to-things, V2X) haberleşmedir. Araçtan araca (Vehicle-to-Vehicle, V2V) ve araçtan yol kenarındaki baz istasyonuna (Vehicle-to-Infrastructure, V2I) olmak üzere iki haberleşme sistemini birlikte içeren V2X haberleşme sistemleri günümüzde özellikle büyük metropollerde günlük hayatı pek çok yönden olumsuz etkileyen trafik kaynaklı problemlere karşı getirdiği çözüm önerileri nedeniyle üniversitlerde teorik çalışmalar yapan araştırmacıların yanı sıra, resmi kurumların, standartları belirleyen organizasyonların ve özellille otomotiv ve bilişim endüstrisindeki şirketlerin gittikçe artan dikkatini çekmeyi başarmıştır. Araçlar arası haberleşme teknolojilerinin gelişimine ivme kazandıran önemli gelişmelere bakılacak olursa; 1999 yılında ABD’de Federal Communication Comission (FCC) 5.9GHz frekans bandında 75MHz’lik bir frekans bandının V2X haberleşme için kullanımını onaylamıştır. 2008 yılında ise Avrupa haberleşme standardları enstitüsü (European Telecommunication Standards Institute) yine 5.9GHz frekans bandında 30Mhz’lik bir bandın bu amaçla kullanılmasını önermiştir. FCC’nin 2003 yılında ITS (Intelligent Transportation Systems) uygulamalarında kullanılacak haberleşme birimleri için yayımladığı rapor ve talebin ardından DSRC (Dedicated Short Range Communication) olarak adlandırılan V2X haberleşme sistemlerinin standardizasyonu için çalışmalar başlamış ve 2004 yılında IEEE 802.11standardı temel alınarak geliştirilen IEEE 802.11p standardı WAVE (Wireless Access in Vehicular Environments) olarak da bilinen adıyla 2010 yılında kabul edilmiştir. Bugün artık pek çok üniversitede çeşitli araştırma grupları V2X haberleşme üzerine akademik çalışmalar yürütürken endüstriyel seviyede ise Avrupa’da örneğin büyük ölçekli Avrupa Birliği projeleri olarak CAR2CAR Communication Corsortium, Secure Vehicular Communication ve NEARCTIS yürütülmektedir. Amerika’da ise ulaştırma bakanlığının desteklediği IntelliDrive projesi ile güvenlik, mobil iletişim ve çevre koruma amaçlı hedefler doğrultusunda trafik altyapısı, araçlar ve yolcuların mobil haberleşme cihazları arasında haberleşmeyi sağlayacak bir telsiz iletişim ağı alt yapısı kurma çalışmaları sürdürülmektedir. Benzer çalışmalar Japon Otomobil Teknolojileri Araştırma Enstitüsü JARI tarafından da yapılmaktadır. Yine V2V haberleşmenin trafik güvenliğini arttırmadaki öneminin anlaşılmasından sonra lider otomobil üreticisi firmalar “Crash Avoidance Metrics Partnership” adını verdikleri proje için ortak çatı altında biraraya gelmişlerdir. Kısaca belirtilmek istenirse, telsiz iletişim alanında V2X haberleşme yeni ama oldukça önemli bir çalışma alanı olarak görülmektedir. Günümüz telsiz haberleşme teknolojilerinden biri olan araçtan araca haberleşme, trafik verimliliğini arttırma, kazaların azaltılması ve trafikte güvenli sürüş konulara çözümler sağlayacak akıllı taşıma sistemlerinin gerçeklenmesinde çekirdek teknoloji konumundadır. Hücresel haberleşme ile karşılaştırıldığında, V2V haberleşme bazı yeni zorlukları içerir. V2V haberleşme kanallarının istatistiksel özellikleri hücresel telsiz haberleşme kanallarının istatistiksel özelliklerinden farklıdır. Bu nedenle, Rayleigh, Rician ve Nakagami-m gibi iyi bilinen hücresel haberleşme kanal modelleri V2V haberleşme kanallarındaki sönümlemeyi modellemek için uygun değildir. Yapılan saha ölçümlerinden görüldüğü üzere, V2V haberleşme kanallarında kanal kazancı, hareketli kaynaklar etrafında, her biri ayrı bir işaret kaynağı gibi davranan birbirinden bağımsız saçıcı gupların oluşturduğu sanal kanalların kanal kazançlarının çarpımından meydana gelmektedir. Kanal kazancının bu çarpımsallık niteliğinden dolayı V2V haberleşme kanalları kaskad sönümlemeli kanal modeli olarak adlandırılan bir grup kanal modeli ile modellenmelidirler. V2V haberleşmede karşılaşılan zorlukların bir nedeni, gerek haberleşen araçların gerekse onların etrafındaki diğer araçların yüksek hızlardaki hareketliliği nedeniyle haberleşme ortamının çevresel olarak çok hızlı değişmesidir. Bunun yanısıra araç antenlerinin görece düşük yükseklikte olmasının da etkisiyle, özellikle yerleşim birimleri içindeki yoğun trafik şartları düşünüldüğünde, haberleşen araçlar arasında çoğu zaman doğrudan görüş olmayacaktır. Bu da iletişimin sürekliliği ve güvenilirliği açısından işbirlikli haberleşmeyi kaçınılmaz kılmaktadır. Ancak doğrudan haberleşmeye nazaran daha fazla zaman dilimi gereksinimi işbirlikli sistemlerin temel dezavantajıdır. Veri iletim hızında kayba neden olan bu dezavantajı yok etmenin bir yolu, iki haberleşme biriminin aynı zaman aralığında aynı röle üzerinden veri aktarmasına imkan tanıyan fiziksel katman ağ kodlama (Physical Layer Network Coding, PLNC) tekniğidir. Ani gelişen durumların çok sayıda kullanıcıya kısa sürede bildirilmesini gerektirecek trafik içi haberleşmede PLNC tekniği yüksek başarımlı V2V haberleşme sistemlerinin tasarımında önemli bir rol oynayacaktır. Bu tezde sunulan çalışmalar üç grupta ele alınabilir. Birinci gruptaki ilk çalışmada tek antenli tek röleli ve röle üzerinde sabit kazançlı kuvvetlendir-ve-aktar tekniği kullanılarak PLNC yapılan bir işbirlikli V2V haberleşme sistemi tasarlanmıştır. Sistemin performans analizleri kaskad Nakagami-m kanal modeli varsayımı altında yapılmış olup bu kanal modeli, araçlar arası haberleşmeye uygun olan çift Rayleigh, kaskad Rayleigh, çift Nakagami-m ve genelleştirilmiş-K kanal modellerinin yanı sıra geleneksel hücresel haberleşme kanal modellerini de kapsamaktadır. Dolayısıyla bu çalışmada elde edilen sonuçlar bu kanal modelleri için de geçerlidir. Sistemin hata performans analizleri yapılırken öncelikle uçtan-uca işaret gürültü oranına ait birikimsel olasılık dağılım fonksiyonu kapalı formda elde edilmiş, ardından bu dağılım fonksiyonu kullanılarak sistemin servis kesinti olasılığı ve çeşitli modülasyon tipleri için sembol hata olasılığı ifadeleri kapalı formda bulunmuştur. Bu analizlerin bir devamı olarak, birinci grupta yapılan ikinci çalışmada ise, kaynaklarda öz-girişim işaretinin tam olarak yok edilemediği durumlar için yine tek antenli tek röleli rölede sabit kazançlı kuvvetlendir-ve-aktar tekniği kullanılarak PLNC yapılan sistemin performans analizi kaskad ve hızlı sönümlemeli Rayleigh kanal varsayımı altında yapılmış ve sisteme ait servis kesinti olasılığı ifadesi kapalı formda elde edilerek öz girişimin sistem performansına etkileri incelenmiştir. Tezde yer alan ikinci grup çalışmada, çok girişli çok çıkışlı (multiple input multiple output, MIMO) bir V2V haberleşme sistemi tasarlanmıştır. Sistemde birden çok röle olup kaynaklar ve tüm röleler çok antenlidir. Ayrıca röleler değişken kazançlı kuvvetlendir-ve-aktar tekniği uygulayarak PLNC yapmaktadır. Bu çalışmada da kaskad Nakagami-m kanal modeli kullanıldığından elde edilen sonuçlar yukarıda bahsedilen diğer kaskad veya kaskad olmayan kanal modelleri için de geçerlidir. Burada yapılan analizler ile tüm sistemin servis kesinti performansı kaynakların ortak servis kesinti olasılıkları cinsinden ifade edilerek bu olasılık tek katlı integral formunda bulunmuştur. Ardından servis kesinti olasılığı için alt ve üst sınır ifadeleri kapalı formda elde edilmiştir. Bulunan sınır ifadeleri aracılığıyla sistemde elde edilebilecek çeşitleme derecesi, röle sayısı, kaynak ve rölelerde kullanılan anten sayıları ve kanalların kaskadlık dereceleri ve sönümleme parametrelerinin aldığı değerlere bağlı olarak sistem parametreleri cinsinden ifade edilmiştir. Tasarlanan bu sistem ile ortak anten ve röle seçimi yapılarak V2V haberleşme sistemlerinin performansının daha da iyileştirilebileceği gösterilmiştir. Tezde yapılan üçüncü çalışmada PLNC yapılan bir çok antenli çok röleli V2V haberleşme sisteminde uzay-zaman kafes kodlama tekniği kullanılarak sistem performansının daha da iyileştirilmesi sağlanmıştır. Bu amaçla öncelikle sistemin çiftsel hata olasılığı için bir üst sınır ifadesi çift Rayleigh sönümlemeli kanal varsayımı için elde edilmiştir. Daha sonra bu olasılığı en küçük yapacak kodların inşaası için yeni bir kod tasarım ölçütü türetilmiş ve bu ölçüt kullanılarak çift Rayleigh sönümlemeli kanallarda PLNC tekniği kullanan MIMO V2V haberleşme sistemler için 4 ve 8 durumlu yeni uzay-zaman kafes kodları bulunmuştur.As a current state-of-the-art in wireless communications, Vehicle-to-Vehicle (V2V) communications is the core technology to build the intelligent transportation infrastructures promising the solutions to the issues such as traffic efficiency increasing, accident reduction and safety improvements. In comparison with the cellular wireless communication, there are some new challenges within the V2V communication. The statistical properties of the V2V communication channels differ from those of the cellular channels. Thereby, well known cellular channel models such as Rayleigh, Rician and Nakagami-m are not appropriate to simulate the fading in V2V communication channels. Field measurements reveal that V2V communication channels can be modeled by a class of channel models where the gain is obtained by multiplying the gains of virtual channels produced by each individual scattering group around that behaves as an independent signal source. Due to their multiplicativity nature, V2V communication channels are named as cascaded fading channels. A major challenge in V2V communications is that the physical environment is unsettled due to the mobility of the wireless units and other vehicles around these units. Additionally, the vehicle antennas have relatively lower heights. Therefore, especially considering the traffic in urban areas, most of the time there will be no line-of-sight between the communicating vehicles. This makes cooperative communications inevitable for seamless and reliable communication among the moving vehicles. And yet, compared to non-cooperative communication, the cooperation protocols require more time slots, which results in a decrease in data transmission rate. A method to cope with this drawback is physical layer network coding (PLNC) providing the simultaneous data transmissions of the vehicles via the same relay. The PLNC method will play an important role in the design of the high performance V2V communication systems serving in the heavy traffic conditions when a large number of users need to be notified about suddenly changing situations. Studies presented in this thesis can be divided into three categories. In the first category, a cooperative V2V communication system employing PLNC using fixed gain amplify-and-forward technique is proposed and its outage and error performance analysis is investigated. Analytic results are derived under the cascaded Nakagami-m fading channel model assumption covering double Rayleigh, cascaded Rayleigh, double Nakagami-m, generalized-K and conventional cellular channel models as well. Therefore, the results obtained by this work are also valid for all these channel models. In the error performance investigation of the proposed system, first, exact cumulative density function of the end to end signal to noise ratio is derived. Then, using this cumulative density function, the exact closed-form outage probability is obtained. Then the exact closed-form symbol error rate expression for various modulation types is derived. As a continuation of this work, the performance analysis of the same system is investigated for not only cascaded but also fast fading Rayleigh channels in the presence of the self-interference. Thus the exact closed-form outage probability expression is obtained, and it is shown that the self-interference may cause the error floor in the performance of the network coded communication systems. In the second category, a multiple input multiple output (MIMO) V2V communication system is proposed. In this proposed system, all source and relay vehicles have multiple antennas while the relays employ the PLNC method using variable gain amplify-and-forward technique. The analytic results are derived for the cascaded Nakagami-m fading channels, and therefore the result of this work are held for the cascaded and non-cascaded channels, as mentioned above. Furthermore, the performance of the system is evaluated in terms of joint outage probability of the sources, and the exact outage probability expression is obtained in a single integral form while the upper and the lower bounds of the outage probability are obtained in the closed-form. Moreover, asymptotic diversity order is quantified as a function of the number of the relays, the number of the antennas at the sources and the relays, and the channel parameters which are cascading degree and fading parameter values. Within this system, it is shown that the service outage probability performance can be enhanced by employing joint antenna and relay selection. In the third category, PLNC and space-time trellis coding (STTC) techniques are combined to improve the error performance of a multi-antenna multi-relay V2V system. The upper bound expression of the pairwise error probability of the system is evaluated for double Rayleigh fading channels. Then using the upper bound expression, a novel code-design criterion is derived for cascaded fading channels. Then, by using this new criterion, a novel STTCs with 4 and 8 states are proposed for MIMO V2V PLNC systems.DoktoraPh.D

    Initial synchronisation of wideband and UWB direct sequence systems: single- and multiple-antenna aided solutions

    No full text
    This survey guides the reader through the open literature on the principle of initial synchronisation in single-antenna-assisted single- and multi-carrier Code Division Multiple Access (CDMA) as well as Direct Sequence-Ultra WideBand (DS-UWB) systems, with special emphasis on the DownLink (DL). There is a paucity of up-to-date surveys and review articles on initial synchronization solutions for MIMO-aided and cooperative systems - even though there is a plethora of papers on both MIMOs and on cooperative systems, which assume perfect synchronization. Hence this paper aims to ?ll the related gap in the literature

    The Application of Spatial Complementary Code Keying in Point-to-Point MIMO Wireless Communications Systems

    Get PDF

    Wireless secrecy under multivariate correlated Nakagami-m fading

    Get PDF
    Current wireless secrecy research in the literature has mainly been performed for one wiretapper under correlated fading. In this paper, a new wireless secrecy framework for multiple wiretappers under multivariate exponentially-correlated (exp.c.) Nakagami-m fading is proposed. Using the distribution of multivariate exp.c. Nakagami-m fading, new, exact, and compact expressions for the ergodic secrecy capacity, and secrecy outage probability (SOP) under multiple wiretappers are obtained for an integer fading parameter m. A secrecy analysis is also performed for the first time in this paper using an adaptive on/off transmission encoder under multivariate exp.c. Nakagami-m fading. A secrecy analysis with three wiretappers under quadrivariate exp.c. Nakagami-m fading is also given, which shows the effectiveness of the new framework. Simulation results are shown to exactly match theoretical predictions

    Antenna diversity for Bluetooth

    Get PDF

    Transmit antenna selection in fading wireless communication systems

    Get PDF
    Includes abstract.Includes bibliographical references (leaves 79-83).To address the drawbacks associated with multiple-input multiple-output (MIMO) systems, we propose the use of the transmit antenna selection technique. In transmit antenna selection, the best performing antenna(s) is selected from all the available transmit antennas for transmission. Transmit antenna selection reduces the number of radio frequency chains, and the system complexity while still achieving the goals of multiple antenna systems. In this thesis the performance of a MIMO system employing transmit antenna selection and maximal-ratiocombining is studied
    corecore