A Pipeline Analog-To-Digital Converter for a Plasma Impedance Probe

Space instrumentation technology is an essential tool for rocket and satellite research, and is expected to become popular in commercial and military operations in fields such as radar, imaging, and communications. These instruments are traditionally implemented on printed circuit boards using discrete general-purpose Analog-to-Digital Converter (ADC) devices and other components. A large circuit board is not convenient for use in micro-satellite deployments, where the total payload volume is limited to roughly one cubic foot. Because micro-satellites represent a fast growing trend in satellite research and development, there is motivation to explore miniaturized custom application-specific integrated circuit (ASIC) designs to reduce the volume and power consumption occupied by instrument electronics. In this thesis, a model of a new Plasma Impedance Probe (PIP) architecture, which utilizes a custom-built ADC along with other analog and digital components, is proposed. The model can be fully integrated to produce a low-power, miniaturized impedance probe

A Portable and Autonomous Magnetic Detection Platform for Biosensing

This paper presents a prototype of a platform for biomolecular recognition detection. The system is based on a magnetoresistive biochip that performs biorecognition assays by detecting magnetically tagged targets. All the electronic circuitry for addressing, driving and reading out signals from spin-valve or magnetic tunnel junctions sensors is implemented using off-the-shelf components. Taking advantage of digital signal processing techniques, the acquired signals are processed in real time and transmitted to a digital analyzer that enables the user to control and follow the experiment through a graphical user interface. The developed platform is portable and capable of operating autonomously for nearly eight hours. Experimental results show that the noise level of the described platform is one order of magnitude lower than the one presented by the previously used measurement set-up. Experimental results also show that this device is able to detect magnetic nanoparticles with a diameter of 250 nm at a concentration of about 40 fM. Finally, the biomolecular recognition detection capabilities of the platform are demonstrated by performing a hybridization assay using complementary and non-complementary probes and a magnetically tagged 20mer single stranded DNA target

Standard converter of sine voltage into time interval for measuring thermoelectric transducer error δacdc

In this article the problem of δacdc error in thermal transducers during thermal comparison definition is disclosed. Here is studied and reasoned the method of converting of sine voltage amplitude into time interval. Structural scheme and algorithm of new instrument for measuring δacdc error using this method is suggested. Influence of signal discreteness on its spectrum is studied and methods of effective removal of higher harmonics during quasi-sinusoidal voltage generation are suggested

Vector magnetometer design study: Analysis of a triaxial fluxgate sensor design demonstrates that all MAGSAT Vector Magnetometer specifications can be met

The design of the vector magnetometer selected for analysis is capable of exceeding the required accuracy of 5 gamma per vector field component. The principal elements that assure this performance level are very low power dissipation triaxial feedback coils surrounding ring core flux-gates and temperature control of the critical components of two-loop feedback electronics. An analysis of the calibration problem points to the need for improved test facilities

High Frequency, High Linearity and Low Noise Digital to Time Converter for Phase Adjustment

Nowadays, fast communication systems have become vital for our lifestyle. As a result, the digital PLL fulfils a very important role as frequency synthesizer, demodulator or distributor of clock signals in microprocessors and similar digital circuits. Thus, the correction of the signal using a phase adjust- ment is essential for the good operation of the PLL. In this work, it is proposed a variable slope digital to time converter (DTC), as a programmable delay line, used for the correction of the phase of a digital PLL. The work is focused on the study of the performance of the circuit, through the evaluation of fundamental parameters such as RMS jitter, line- arity, resolution and delay range. Accordingly, it is employed a 4-bit topology using 130 nm MOSFET technology. The in- tended DTC takes advantage of CMOS inverters, due to their simplicity and low noise, and capacitors, for the programmable delay RC network. The DTC functioning is based on the activation of switching transistors to trigger the programmable capacitors, through a code to define the number of capacitors that introduce delay. The circuit is complemented with a simple CMOS inverter as a comparator that triggers when the threshold voltage is attained and an output buffer employed to correct the slopes of the signal. The proposed DTC proposed is a single-ended architecture that achieves 52.50 fs RMS jitter, and the resulting DNL and INL are equivalent to 0.1124 LSB and 0.09773 LSB, respectively. The 4-bit de- lay line has a resolution of 15.2 ps, an area of 0.018 mm2 and a power consumption of 62.8 μW from a 1.2 V low dropout regulator (LDO).Atualmente, os sistemas de comunicação rápida tornaram-se vitais para o nosso estilo de vida. Como resultado, a PLL digital apresenta um papel importante em funções como sintetizador de frequên- cia, demodulador ou distribuidor de sinais de relógio de microprocessadores ou circuitos digitais seme- lhantes. Assim, a correção do sinal utilizando um ajuste de fase é essencial para o bom funcionamento da PLL. Neste trabalho, é proposto um conversor digital para tempo de inclinação de curva variável, como uma linha de atraso programável, utilizada para corrigir a fase de uma PLL digital. Este trabalho é focado no estudo da performance do dispositivo, através da avaliação de parâme- tros fundamentais como RMS jitter, linearidade, resolução e range de atraso. Desta forma, a topologia implementada utiliza 4 bits e tecnologia MOSFET 130 . O conversor digital para tempo é criado utilizando inversores CMOS, que têm as vantagens de apresentar simplicidade e baixo ruído, e condensadores, utilizados para programar a rede de atraso de RC. Este funciona com base na ativação de transístores, empregues como interruptores para acionar os conden- sadores programáveis, através de um código que define o número de condensadores ligados que intro- duzem atraso. O circuito é complementado com um inversor CMOS como comparador que é acionado quando a voltagem de threshold é atingida e um buffer de saída implementado para corrigir a inclinação das curvas. O respetivo conversor apresenta uma arquitetura com uma única saída que é capaz de atingir 52.50 fs RMS jitter, e possuí DNL e INL equivalente a 0.1124 LSB e 0.09773 LSB, respetivamente. A linha de atraso de 4 bits tem uma resolução de 15.2 ps, uma área de 0.018 mm2 e um consumo de potência de 62.8 μW vindo de um regulador de baixa queda de tensão de 1.2 V

차량용 CIS Interface 를 위한 All-Digital Phase-Locked Loop 의 설계 및 분석

학위논문 (석사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2021. 2. 정덕균.This thesis presents design techniques for All-Digital Phase-Locked Loop (ADPLL) assisting the automotive CMOS image sensor (CIS) interface. To target Gear 3 of the automotive physical system, the proposed AD-PLL has a wide operation range, low RMS jitter, and high PVT tolerance characteristics. Detailed analysis of the loop dynamics and the noise analysis of AD-PLL are done by using Matlab and Verilog behavioral modeling simulation before an actual design. Based on that analysis, the optimal DLF gain configurations are yielded, and also, accurate output responses and performance are predictable. The design techniques to reduce the output RMS jitter are discussed thoroughly and utilized for actual implementation. The proposed AD-PLL is fabricated in the 40 nm CMOS process and occupies an effective area of 0.026 mm2. The PLL output clock pulses exhibit an RMS jitter of 827 fs at 2 GHz. The power dissipation is 5.8 mW at 2 GHz, where the overall supply voltage domain is 0.9 V excluding the buffer which is 1.1 V domain.본 논문에서는 자동차 CMOS 이미지 센서 (CIS) 인터페이스를 지원하 는 AD-PLL 을 제안한다. Automotive Physical 시스템의 Gear 3 를 지원하기 위해 제안된 AD-PLL 은 1.5 GHz 에서 3 GHz 의 동작 주파수를 가지며, 낮 은 RMS Jitter 및 PVT 변화에 대한 높은 둔감성을 갖는다. 설계에 앞서서 Matlab 및 Verilog Behavioral Simulation 을 통해 Loop system 의 역학에 대한 자세한 분석 및 AD-PLL 의 Noise 분석을 수행하였고, 이 분석을 기반으로 최적의 DLF gain 과 정확한 출력 응답 및 성능을 예측 할 수 있었다. 또한, 출력의 Phase Noise 와 RMS Jitter 를 줄이기 위한 설계 기법을 자세히 다루고 있으며 이를 실제 구현에 활용했다. 제안된 회로는 40 nm CMOS 공정으로 제작되었으며 Decoupling Cap 을 제외하고 0.026 mm2 의 유효 면적을 차지한다. 측정된 출력 Clock 신호의 RMS Jitter 값은 2 GHz 에서 827 fs 이며, 총 5.8 mW의 Power 를 소비한다. 이 때, 전체적인 공급 전압은 0.9 V 이며, Buffer 의 Power 만이 1.1 V 를 사용하 였다.ABSTRACT I CONTENTS II LIST OF FIGURES IV LIST OF TABLES VII CHAPTER 1 INTRODUCTION 1 1.1 MOTIVATION 1 1.2 THESIS ORGANIZATION 3 CHAPTER 2 BACKGROUND ON ALL-DIGITAL PLL 4 2.1 OVERVIEW 4 2.2 BUILDING BLOCKS OF AD-PLL 7 2.2.1 TIME-TO-DIGITAL CONVERTER 7 2.2.2 DIGITALLY-CONTROLLED OSCILLATOR 10 2.2.3 DIGITAL LOOP FILTER 13 2.2.4 DELTA-SIGMA MODULATOR 16 2.3 PHASE NOISE ANALYSIS OF AD-PLL 20 2.3.1 BASIC ASSUMPTION OF LINEAR ANALYSIS 20 2.3.2 NOISE SOURCES OF AD-PLL 21 2.3.3 EFFECTS OF LOOP DELAY ON AD-PLL 24 2.3.4 PHASE NOISE ANALYSIS OF PROPOSED AD-PLL 26 CHAPTER 3 DESIGN OF ALL-DIGITAL PLL 28 3.1 DESIGN CONSIDERATION 28 3.2 OVERALL ARCHITECTURE 30 3.3 CIRCUIT IMPLEMENTATION 32 3.3.1 PFD-TDC 32 3.3.2 DCO 37 3.3.3 DIGITAL BLOCK 43 3.3.4 LEVEL SHIFTING BUFFER AND DIVIDER 45 CHAPTER 4 MEASUREMENT AND SIMULATION RESULTS 52 4.1 DIE PHOTOMICROGRAPH 52 4.2 MEASUREMENT SETUP 54 4.3 TRANSIENT ANALYSIS 57 4.4 PHASE NOISE AND SPUR PERFORMANCE 59 4.4.1 FREE-RUNNING DCO 59 4.4.2 PLL PERFORMANCE 61 4.5 PERFORMANCE SUMMARY 65 CHAPTER 5 CONCLUSION 67 BIBLIOGRAPHY 68 초 록 72Maste

A built-in self-test technique for high speed analog-to-digital converters

Fundação para a Ciência e a Tecnologia (FCT) - PhD grant (SFRH/BD/62568/2009