O impacto dos efeitos da memória de longo termo na linearizabilidade de amplificadores de potência baseados em AlGaN/GaN HEMT

AlGaN/GaN High Electron Mobility Transistor (HEMT)s are among the preferred options for radio-frequency power amplification in cellular base station transmitters and radar applications. However, despite their promising outlook, the pervasiveness of trapping effects makes them resilient to conventional digital predistortion schemes, which not only decrease their current range of applications but could also preclude their integration in future small cells and multiple-input multiple-output architectures where simpler predistortion schemes are mandatory. So, this PhD thesis aims at developing a meaningful link between the device physics and the linearizability of the AlGaN/GaN HEMT-based Power Amplifier (PA). In order to bridge this gap, this thesis begins with a clear explanation for the mechanisms governing the dominant source of trapping effects in standard AlGaN/GaN HEMTs, namely buffer traps. Based on this knowledge, we explain why the best known physically-supported trapping models, used to represent these devices, are insufficient and present a possible improvement to what we consider to be the most accurate model, supported by Technology Computer-Aided Design (TCAD) simulations. This has also been corroborated through a novel double-pulse technique able to describe experimentally both the capture and emission transients in a wide temporal span under guaranteed isothermal conditions. The measured stretched capture transients validated our understanding of the process while the temperature dependence of the emission profiles confirmed buffer traps as the dominant source of trapping effects. Finally, through both simulations and experimental results, we elaborate here the relationship between the emission time constant and the achievable linearity of GaN HEMT-based PAs, showing that the worst-case scenario happens when the emission time constant is on the order of the time between consecutive envelope peaks above a certain amplitude threshold. This is the case in which we observed a more pronounced hysteresis on the gain and phase-shift characteristics, and so, a stronger impact of the memory effects. The main outcome of this thesis suggests that the biggest linearizability concern in standard AlGaN/GaN HEMT-based PAs lies on the large emission time constants of buffer traps.AlGaN/GaN HEMTs estão entre as opções preferidas para amplificação de potência de radiofrequência em transmissores de estacão base celular e aplicações de radar. No entanto, apesar de sua perspetiva promissora, a influência dos efeitos de defeitos com níveis profundos torna-os imunes aos esquemas convencionais de pre-distorção digital. Assim, esta tese de doutoramento visa desenvolver uma ligação significativa entre a física do dispositivo e a linearização de amplificadores de potência baseados em Al- GaN/GaN HEMTs. Por forma a preencher esta lacuna, esta tese começa com uma explicação clara dos mecanismos que governam a fonte dominante de efeitos de defeitos com níveis profundos em AlGaN/GaN HEMTs standard, especificamente defeitos no buffer. Com base neste conhecimento, são aparentadas as falhas dos modelos físicos mais conhecidos de defeitos de nível profundo usados para representar estes dispositivos, assim como uma possível melhoria suportada em simulações de TCAD. Isto é também corroborado por uma nova técnica de duplo-pulso capaz de descrever experimentalmente os transientes de captura e emissão num amplo intervalo temporal sob condições isotérmicas. Os transientes de captura medidos validam a nossa compreensão do processo, enquanto que a dependência da temperatura nos perfis de emissão confirmou os defeitos no buffer como a fonte dominante de efeitos de defeitos com níveis profundos. Por fim, através de simulações e resultados experimentais, elabora-se aqui a relação entre a constante de tempo de emissão e a linearizabilidade dos amplificadores baseados em AlGaN/GaN HEMT, mostrando que o pior cenário acontece quando a constante de tempo de emissão é da mesma ordem do tempo entre picos consecutivos da envolvente acima de um certo limiar de amplitude. Este é o caso para o qual se observa uma histerese mais pronunciada nas características de ganho e fase e, consequentemente, um impacto mais forte dos efeitos de memória. O resultado principal desta tese sugere que a maior preocupação na linearização de amplificadores baseados em AlGaN/GaN HEMTs standard está nas grandes constantes de tempo de emissão dos defeitos no buffer.Programa Doutoral em Engenharia Eletrotécnic

Bootstrapping Cognitive Radio Networks

Cognitive radio networks promise more efficient spectrum utilization by leveraging degrees of freedom and distributing data collection. The actual realization of these promises is challenged by distributed control, and incomplete, uncertain and possibly conflicting knowledge bases. We consider two problems in bootstrapping, evolving, and managing cognitive radio networks. The first is Link Rendezvous, or how separate radio nodes initially find each other in a spectrum band with many degrees of freedom, and little shared knowledge. The second is how radio nodes can negotiate for spectrum access with incomplete information. To address the first problem, we present our Frequency Parallel Blind Link Rendezvous algorithm. This approach, designed for recent generations of digital front-ends, implicitly shares vague information about spectrum occupancy early in the process, speeding the progress towards a solution. Furthermore, it operates in the frequency domain, facilitating a parallel channel rendezvous. Finally, it operates without a control channel and can rendezvous anywhere in the operating band. We present simulations and analysis on the false alarm rate for both a feature detector and a cross-correlation detector. We compare our results to the conventional frequency hopping sequence rendezvous techniques. To address the second problem, we model the network as a multi-agent system and negotiate by exchanging proposals, augmented with arguments. These arguments include information about priority status and the existence of other nodes. We show in a variety of network topologies that this process leads to solutions not otherwise apparent to individual nodes, and achieves superior network throughput, request satisfaction, and total number of connections, compared to our baselines. The agents independently formulate proposals based upon communication desires, evaluate these proposals based upon capacity constraints, create ariii guments in response to proposal rejections, and re-evaluate proposals based upon received arguments. We present our negotiation rules, messages, and protocol and demonstrate how they interoperate in a simulation environment

Proceedings: Vol. 1

Contents: Part I: Introductions Part II: OLEDs and related 1 Part III: OFET´s and devices 1 Part IV: Materials & Methods 1 Part V: Solar cells / OPV 1 Part VI: OFET and devices Part VII: OLEDs and related 2 Part VIII: Materials & Methods 2 Part IX: Solar cells / OPV 2Part X: Posters (s. Volume 2)Version notice: There are minor differences between the printed and online version.Druckausgabe: 4th International Symposium Technologies for Polymer Electronics - TPE 10 : 18 - 20 May 2010, Rudolstadt/Germany / ed. by Hans-Klaus Roth, Klaus Heinemann and Gerhard Gobsch Ilmenau : Univ.-Verl. Ilmenau, 2010. - 2 Bd., insg. 337 S. ISBN 978-3-939473-66-4 Preis: 75,00

Coarse-grained modelling of blood cell mechanics

This thesis concerns development of mechanically realistic in silico representations of human blood cells using coarse-grained molecular dynamics (CGMD), ultimately building a new model for a lymphocyte-class white blood cell (WBC). This development is approached successively, evaluated through simulation of experimental testing methods common to past in vitro studies on blood cell mechanics. Considering both their biophysical simplicity and the extensive associated literature, the red blood cell (RBC) is first considered. As a foundation, I thus used the CGMD RBC model of Fu et al. [Lennard-Jones type pair-potential method for coarse-grained lipid bilayer membrane simulations in LAMMPS, Fu et al., Comput. Phys. Commun., 210, 193-203 (2017)]. Chapter 3 establishes implementation of this model, and in silico implementations of the three chosen testing methods. In doing so, the first quantitative assessment of the "miniature cell" approach is conducted - being the down-scaling of the physical cell size to make feasible simulation times, as was done in the original article presenting the model. The RBC model is then used as a foundation from which to develop a new whole-cell WBC lymphocyte model. This is approached sequentially. Firstly (Chapter 4), the morphology and mechanics relevant to the existing RBC model are adapted to those of a lymphocyte. As such, a quasi-spherical morphology is induced, and elastic membrane-associated parameters brought in line with the literature on isolated lymphocytes in vitro. A semi-rigid nucleus is then added to the cell interior, again parameterised to produce elastic properties consistent with the literature. These developments produce a cell having macroscopic mechanical properties much more consistent with a WBC, with an "optimal" parameterisation established. After the membrane and nucleus, the entity most influential to the mechanics of nucleated cells (such as WBC) is their complex intracellular actin-based cytoskeleton (CSK). Therefore, Chapter 5 attempts to represent such a system within our new lymphocyte model. This is approached in three successive stages, assessed against recognised CSK mechanical properties, in particular those also common to soft glassy materials. As such, a novel CSK representation is developed, inspired as a discretisation of soft glassy rheology (SGR). It is proposed that the resulting system has characteristics comparable to having undergone a glass-like transition, as relatable to a real CSK. Therefore, the resulting lymphocyte model may lay a foundation for future development towards mechanically accurate representations of other cells - in particular, a circulating tumour cell

Comunicações sem-fios de tempo-real para ambientes abertos

Doutoramento em Engenharia InformáticaWireless communication technologies have become widely adopted, appearing in heterogeneous applications ranging from tracking victims, responders and equipments in disaster scenarios to machine health monitoring in networked manufacturing systems. Very often, applications demand a strictly bounded timing response, which, in distributed systems, is generally highly dependent on the performance of the underlying communication technology. These systems are said to have real-time timeliness requirements since data communication must be conducted within predefined temporal bounds, whose unfulfillment may compromise the correct behavior of the system and cause economic losses or endanger human lives. The potential adoption of wireless technologies for an increasingly broad range of application scenarios has made the operational requirements more complex and heterogeneous than before for wired technologies. On par with this trend, there is an increasing demand for the provision of cost-effective distributed systems with improved deployment, maintenance and adaptation features. These systems tend to require operational flexibility, which can only be ensured if the underlying communication technology provides both time and event triggered data transmission services while supporting on-line, on-the-fly parameter modification. Generally, wireless enabled applications have deployment requirements that can only be addressed through the use of batteries and/or energy harvesting mechanisms for power supply. These applications usually have stringent autonomy requirements and demand a small form factor, which hinders the use of large batteries. As the communication support may represent a significant part of the energy requirements of a station, the use of power-hungry technologies is not adequate. Hence, in such applications, low-range technologies have been widely adopted. In fact, although low range technologies provide smaller data rates, they spend just a fraction of the energy of their higher-power counterparts. The timeliness requirements of data communications, in general, can be met by ensuring the availability of the medium for any station initiating a transmission. In controlled (close) environments this can be guaranteed, as there is a strict regulation of which stations are installed in the area and for which purpose. Nevertheless, in open environments, this is hard to control because no a priori abstract knowledge is available of which stations and technologies may contend for the medium at any given instant. Hence, the support of wireless real-time communications in unmanaged scenarios is a highly challenging task. Wireless low-power technologies have been the focus of a large research effort, for example, in the Wireless Sensor Network domain. Although bringing extended autonomy to battery powered stations, such technologies are known to be negatively influenced by similar technologies contending for the medium and, especially, by technologies using higher power transmissions over the same frequency bands. A frequency band that is becoming increasingly crowded with competing technologies is the 2.4 GHz Industrial, Scientific and Medical band, encompassing, for example, Bluetooth and ZigBee, two lowpower communication standards which are the base of several real-time protocols. Although these technologies employ mechanisms to improve their coexistence, they are still vulnerable to transmissions from uncoordinated stations with similar technologies or to higher power technologies such as Wi- Fi, which hinders the support of wireless dependable real-time communications in open environments. The Wireless Flexible Time-Triggered Protocol (WFTT) is a master/multi-slave protocol that builds on the flexibility and timeliness provided by the FTT paradigm and on the deterministic medium capture and maintenance provided by the bandjacking technique. This dissertation presents the WFTT protocol and argues that it allows supporting wireless real-time communication services with high dependability requirements in open environments where multiple contention-based technologies may dispute the medium access. Besides, it claims that it is feasible to provide flexible and timely wireless communications at the same time in open environments. The WFTT protocol was inspired on the FTT paradigm, from which higher layer services such as, for example, admission control has been ported. After realizing that bandjacking was an effective technique to ensure the medium access and maintenance in open environments crowded with contention-based communication technologies, it was recognized that the mechanism could be used to devise a wireless medium access protocol that could bring the features offered by the FTT paradigm to the wireless domain. The performance of the WFTT protocol is reported in this dissertation with a description of the implemented devices, the test-bed and a discussion of the obtained results.As tecnologias de comunicação sem fios tornaram-se amplamente adoptadas, surgindo em aplicações heterógeneas que vão desde a localização de vítimas, pessoal médico e equipamentos em cenários de desastre à monitorização da condição física de máquinas em ambientes industrials. Muito frequentemente, as aplicações exigem uma resposta limitada no tempo que, geralmente, em sistemas distribuídos, é substancialmente dependente do desempenho da tecnologia de comunicação utilizada. Estes sistemas tendem a possuir requisitos de tempo-real uma vez que a comunicação de dados tem de ser conduzida dentro de limites temporais pré-definidos que, quando não cumpridos, podem comprometer o correcto funcionamento do sistema e resultar em perdas económicas ou colocar em risco vidas humanas. A potencial adopção de tecnologias sem-fios para um crescente número de cenários traduz-se num aumento da complexidade e heterogeneidade dos requisitos operacionais relativamente às tecnologias cabladas. A acompanhar esta tendência verifica-se uma crescente procura de sistemas distribuídos, caracterizados quer por uma boa relação custo-eficácia, quer pela simplicidade de instalação, manutenção e adaptação. Ao mesmo tempo, estes sistemas tendem a requerer flexibilidade operacional, que apenas pode ser assegurada se a tecnlogia de comunicação empregue supportar transmissões de dados dispoletadas quer por eventos (event-triggered), quer por tempo (timetriggered) e se, ao mesmo tempo, em funcionamento, permitir a alteração dos parâmetros de comunicação correspondentes. Frequentemente, as aplicações com comunicações sem fios caracterizam-se por exigências de instalação que apenas podem ser endereçadas usando alimentação através de baterias e/ou mecanismos de recolha de energia do ambiente envolvente. Estas aplicações têm tipicamente requisitos exigentes de autonomia e de tamanho, impedindo o recurso a baterias de grande dimensão. Dado que o suporte de comunicações pode representar uma parte significativa dos requisitos de energia da estação, o uso de tecnologias de comunicação de elevado consumo não é adequado. Desta forma, nestas aplicações, as tecnologias de comunicação de curto-alcance tornaram-se amplamente adoptadas uma vez que, apesar de se caracterizarem por taxas de transmissão inferiores, consomem apenas uma fracção da energia das tecnologias de maior alcance. resumo Em geral, os requisitos de pontualidade da comunicação de dados podem ser cumpridos através da garantia da disponibilidade do meio no instante em que qualquer estação inicie uma transmissão. Em ambientes controlados esta disponibilidade pode ser garantida, na medida em que existe um controlo de quais as estações que foram instaladas na área e qual a sua função. Contrariamente, em ambientes abertos, tal controlo é difícil de garantir uma vez que não existe conhecimento a priori de que estações ou tecnologias podem competir pelo meio, tornando o suporte de comunicações de temporeal um desafio difícil de implementar em cenários com estações de comunicação não controladas. As comunicações de baixo consumo têm sido o foco de um esforço de investigação bastante amplo, por exemplo, no domínio das redes de sensores sem fios. Embora possam permitir uma maior autonomia a estações baseadas em baterias, estas tecnologias são reconhecidas como sendo negativamente influenciadas por tecnologias semelhantes competindo pelo mesmo meio e, em particular, por tecnologias que utilizem níveis de potência de transmissão mais elevados em bandas de frequências comuns. De forma cada vez mais acentuada, a banda industrial, científica e médica (ISM) dos 2.4 GHz tem-se tornado mais saturada com tecnologias que competem entre si pelo acesso ao meio tais como, por exemplo, Bluetooth e ZigBee, dois padrões de comunicação que são a base de vários protocolos de tempo-real. Apesar destas tecnologias aplicarem mecanismos para melhorar a sua coexistência, são vulneráveis a transmissões de estações não controladas que usem as mesmas tecnologias ou que usem tecnologias com níveis de potência de transmissão mais elevados, impedindo, desta forma, o suporte de comunicações de tempo-real fiáveis em ambientes abertos. O protocolo de comunicação sem fios flexível disparado por tempo (WFTT) é baseado numa arquitectura mestre/múltiplo escravo alavancado na flexibilidade e pontualidade promovidas pelo paradigma FTT e na captura e manutenção determinística do meio suportadas pela técnica de bandjacking (captura de banda). Esta tese apresenta o protocolo WFTT e argumenta que este permite suportar serviços de comunicação de tempo-real com requisitos elevados de fiabilidade em ambientes abertos onde várias tecnologias de comunicação baseadas em contenção disputam o acesso ao meio. Adicionalmente, esta tese reivindica que é possível suportar comunicações sem-fios simultaneamente flexíveis e pontuais em ambientes abertos. O protocolo WFTT foi inspirado no paradigma FTT, do qual importa os serviços de alto nível como, por exemplo, o controlo de admissão. Após a observação da eficácia da técnica de bandjacking em assegurar o acesso ao meio e a correspondente manutenção, foi reconhecida a possibilidade de utilização deste mecanismo para o desenvolvimento de um protocolo de acesso ao meio, capaz de oferecer as funcionalidades do paradigma FTT em meios de comunicação sem-fios. O desempenho do protocolo WFTT é reportado nesta tese com uma descrição dos dispositivos implementados, da bancada de ensaios desenvolvida e dos resultados obtidos

Self Assembly Problems of Anisotropic Particles in Soft Matter.

Anisotropic building blocks assembled from colloidal particles are attractive building blocks for self-assembled materials because their complex interactions can be exploited to drive self-assembly. In this dissertation we address the self-assembly of anisotropic particles from multiple novel computational and mathematical angles. First, we accelerate algorithms for modeling systems of anisotropic particles via massively parallel GPUs. We provide a scheme for generating statistically robust pseudo-random numbers that enables GPU acceleration of Brownian and dissipative particle dynamics. We also show how rigid body integration can be accelerated on a GPU. Integrating these two algorithms into a GPU-accelerated molecular dynamics code (HOOMD-blue), make a single GPU the ideal computing environment for modeling the self-assembly of anisotropic nanoparticles. Second, we introduce a new mathematical optimization problem, filling, a hybrid of the familiar shape packing and covering problem, which can be used to model shaped particles. We study the rich mathematical structures of the solution space and provide computational methods for finding optimal solutions for polygons and convex polyhedra. We present a sequence of isosymmetric optimal filling solutions for the Platonic solids. We then consider the filling of a hyper-cone in dimensions two to eight and show the solution remains scale-invariant but dependent on dimension. Third, we study the impact of size variation, polydispersity, on the self-assembly of an anisotropic particle, the polymer-tethered nanosphere, into ordered phases. We show that the local nanoparticle packing motif, icosahedral or crystalline, determines the impact of polydispersity on energy of the system and phase transitions. We show how extensions of the Voronoi tessellation can be calculated and applied to characterize such micro-segregated phases. By applying a Voronoi tessellation, we show that properties of the individual domains can be studied as a function of system properties such as temperature and concentration. Last, we consider the thermodynamically driven self-assembly of terminal clusters of particles. We predict that clusters related to spherical codes, a mathematical sequence of points, can be synthesized via self-assembly. These anisotropic clusters can be tuned to different anisotropies via the ratio of sphere diameters and temperature. The method suggests a rich new way for assembling anisotropic building blocks.Ph.D.Applied Physics and Scientific ComputingUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/91576/1/phillicl_1.pd